The Well w/Moth 3.0-a water feeder For Jumping Spiders, Lower Bottle, smaller Platform/shelf, Magnetic, includes 2 water Wicks!

The Original, Spider Enchantments designed bottom Bottle Water stations (version 3.0 One Magnet design with a moth) help to keep your Jumping Spider hydrated SAFELY, while also helping maintain humidity in their environment. Water wicks up through the Cotton tube creating a safe source of water for their hydration needs! This water station has a bottom installed bottle with a small, flat platform on the top for your spider to perch safely on while drinking from the cotton wick. These are less likely to leak compared to water stations with the water bottle installing from the top! With that comes lowered drowning risk to your pet from leaks! Placement of the bottle on the bottom leaves more space to install higher to the top of the enclosure, giving better access to your top dwelling spider! This version has a smaller top perch/platform then our original version. Bigger original version is found here: https://www.etsy.com/sg-en/listing/4302864385
Includes 1 super strong Neodymium magnet recessed and attached with a non toxic adhesive installed directly into the water station and 1 Neodymium magnet recessed and attached into a PLA printed handle piece. To install simply place the water station on the inside of the enclosure, wherever you desire and place the included magnet handle piece on the outside of the enclosure.
Will also come with one jumping spider safe wick already installed and one extra to replace when needed.
4" wick offered is a DIY Trim yourself option. Each 4" Cotton Wick stick can give you up to 4- 1" replacement wicks for use in The Oasis or 2- 2" replacement wicks for use with The Well!
These wicks are intended for use with the Oasis or The Well Water stations designed by Spider Enchantments. These are found here for purchase: https://www.etsy.com/sg-en/listing/1797401180/wick-refills-for-the-oasis-and-the-well
Water station is 3-D printed using PLA (Polylactic Acid is a recyclable, natural thermoplastic polyester that is derived from renewable resources such as corn starch or sugar cane. It is nontoxic to animals).
Please remember this is a handmade item 3D printed item and thus there will be variations in the surface of the item.
X-Small - 1.1"Tx1.2"Wx1.2"D holds 2ml of water (approx.)
Small - 1.7"Tx1.3"Wx1.3"D holds 5ml of Water (approx.)
Medium - 1.8"Tx1.3"Wx1.3"D holds 10ml of Water (approx.)
-Bottles are made out of Glass

**I use REALLY strong magnets and unfortunately with that amount of Pull over time the magnets can sometimes come unglued. If this happens you can use Gorilla brand Gel Super Glue to re-install the magnet. Please let the item cure for at least 72 hours.**
**Due to the print/craft on demand nature of my small business I don't allow cancellation of orders once the item has been crafted and assembled.