Hub Blind Shelf | Hunting Blind Tray with Hook Slots | Fits Ameristep Primos Rhino Muddy | Pop Up Ground Blind | USA Made

**A flat shelf inside the blind for the stuff you need at hand — coffee, phone, range finder, binos, calls. Drops onto the back angled poles of any pop-up hub blind in twenty seconds. Zero hardware.**

You're four hours into a sit. Your binos are on the floor next to your boots. Your range finder is buried in a pocket. Your coffee is on the ground where it's about to freeze. Your phone is in a jacket pocket you can't reach without snagging on a stalk of grass. All of it needs a home inside the blind, off the floor, where you can reach it without moving.

**This shelf is 13.2 in wide × 5.9 in deep** — enough surface for a full-size tumbler, a range finder, a phone, and a pair of binos side by side without stacking. And the front edge has a **comb-tooth strip with ~15 slots** so you can hang gear off the front by paracord — calls, scent dispensers, keys, headlamps, whatever.

**Self-locking bracket.** The bracket has a wedge on the back arm that locks against the pole when the shelf sits under gravity. It doesn't slide once it's on. No slop, no rattle, no re-hanging every time you shift your weight in the chair.

**Fits ANY pop-up hub blind with angled back poles between 1/4 in and 3/4 in (6mm to 19mm) in diameter.** No brand or model gotchas — if the pole measures anywhere in that range, this shelf fits.

**Not for**: hard-shell permanent blinds, elevated permanent blinds, treestand-only setups without a mounted platform (needs somewhere to hook on).

**Why this design wins:**
- **Self-locking bracket wedge.** The shelf clips on and stays put. No slide, no rattle.
- **Zero hardware.** Twenty-second install. No drilling, no straps, no clamps.
- **Front comb-slots** — hang paracord loops off the front edge for calls, keys, headlamps, scent dispensers, kill tags, whatever.
- **Compact 13.2 × 5.9 in footprint** fits behind the shooter without crowding the blind interior. Big enough for a full-size tumbler + binos + range finder. Small enough to stow in a pack.
- **Cold-stable to -20°F.** Won't get brittle or crack in Wisconsin, Michigan, or Minnesota winters. Field-tested through November and December.
- **UV-stable.** Sun-exposed straps and blind fabric won't fade or degrade the shelf.
- **Made in USA**, designed and 3D printed in-house in Wisconsin on a Sovol SV08 with our custom slicer profile.

**Install (drop-on, 20 seconds):**
1. Inside your blind, lift the shelf up to the two back angled poles going down toward the floor corners.
2. The bracket hooks at the back-top corners cradle onto the poles.
3. Lower until the shelf sits level. The wedge locks against the poles under the shelf's weight. Load it with your gear.

To remove: lift up and pull forward. Stows flat in a pack (0.75 in thick).

**Material:** Black outdoor-grade plastic. UV-stable, cold-stable to -20°F minimum, holds shape in a hot truck bed in July. 3 perimeters thick.

**Dimensions:**
- Tray: 13.2 in wide × 5.9 in deep × 0.75 in tall
- Front lip: 0.55 in raised with ~15 comb-tooth string slots
- Weight: ~0.4 lb
- Compatible with hub poles 1/4 in to 3/4 in (6mm to 19mm) diameter