SALE! Brass Push Rod Plunger SET for the Swedish Wrap Method with 8 Diameter-Sized Options

CoinRingUSA

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

SALE! Brass Push Rod Plunger SET for the Swedish Wrap Method with 8 Diameter-Sized Options

Message Seller

$57.95

Please select a quantity

Item details

Material

Solid Brass

At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.


This Set contains 4 Brass Push Rod Plungers that are each machined with dual-sided ends (for a total of EIGHT different outer diameter-sized push rod ends) to compress your coin ring through the Swedish Wrap Dies.

Brass was selected as the material over plastic, nylon, and even softer metals like aluminum due to the deforming and galling that can occur with those softer materials from the pressure that's involved when compressing. The largest brass push rod plunger end measures roughly 1.400" in outer diameter, all the way down to the smallest brass push rod plunger end of .750" in outer diameter.

More sizes = more options by reducing the number of times that you have to shrink the reeded-end of your coin ring in the universal reduction dies to make it better fit the push rod plunger.


*** NOTE *** This Set is to be used with the CoinRingUSA® Swedish Wrap Die Set for all Half Dollar, Dollar and Silver Eagle-Sized Coin Rings, listing found below:

https://www.etsy.com/listing/470134369/swedish-wrap-die-set-for-all-half-dollar?ref=shop_home_active_7



Here's a review that I received regarding these tools:


"This is the best thing since sliced bread. Thanks, Ken"
Kenneth Niles on Aug 18, 2016
5 out of 5 stars



PLEASE KEEP THE FOLLOWING IN MIND:

1.) Make sure that you firmly press the teflon-wrapped coin ring to make sure that it is seated evenly into the die before compressing with the brass push rod plungers.

2.) Press SLOW and make sure that the brass push rod plunger covers the majority of the reeded portion of the coin. If it doesn’t cover enough of the reeds, the push rod plunger could slip as you are compressing it, possibly ruining the coin ring. You can fix this issue by placing the coin ring, (reeded side DOWN) into either your Universal 17°, 20°, or 25° reduction die to slightly shrink the outer diameter of the reeded side until the brass push rod better covers the reeds.

3.) Make sure that you don't over press the brass push rod plungers down the Swedish Wrap dies, especially when using a hydraulic press. After some practice, you’ll feel the resistance of when each push rod bottoms out in the dies.



(Arbor press, coins, and coins rings pictured are not included and are used for reference only.)



*** Here's why you should purchase your coin ring-making tools from our CoinRingUSA® Shop:

1.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.

2.) The level of quality of my tools is simply not duplicated elsewhere; as I use the highest quality materials that are precision CNC-machined to the finest standards by expert machinists.

3.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

4.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, techniques, and new tool updates.


5.) All of my coin ring-making tools are 100% guaranteed


6.) Why settle for buying inferior coin ring tools elsewhere? Buy from CoinRingUSA® and get the best!



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for various coin ring updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


To see the other coin ring-making tools available; be sure to visit: CoinRingUSA.com


Thanks, and here's to your coin ring-making success!



*** Shipping:

This set will be shipped by USPS Priority Mail with Signature Confirmation for U.S. residents.

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.


This Set contains 4 Brass Push Rod Plungers that are each machined with dual-sided ends (for a total of EIGHT different outer diameter-sized push rod ends) to compress your coin ring through the Swedish Wrap Dies.

Brass was selected as the material over plastic, nylon, and even softer metals like aluminum due to the deforming and galling that can occur with those softer materials from the pressure that's involved when compressing. The largest brass push rod plunger end measures roughly 1.400" in outer diameter, all the way down to the smallest brass push rod plunger end of .750" in outer diameter.

More sizes = more options by reducing the number of times that you have to shrink the reeded-end of your coin ring in the universal reduction dies to make it better fit the push rod plunger.


*** NOTE *** This Set is to be used with the CoinRingUSA® Swedish Wrap Die Set for all Half Dollar, Dollar and Silver Eagle-Sized Coin Rings, listing found below:

https://www.etsy.com/listing/470134369/swedish-wrap-die-set-for-all-half-dollar?ref=shop_home_active_7



Here's a review that I received regarding these tools:


"This is the best thing since sliced bread. Thanks, Ken"
Kenneth Niles on Aug 18, 2016
5 out of 5 stars



PLEASE KEEP THE FOLLOWING IN MIND:

1.) Make sure that you firmly press the teflon-wrapped coin ring to make sure that it is seated evenly into the die before compressing with the brass push rod plungers.

2.) Press SLOW and make sure that the brass push rod plunger covers the majority of the reeded portion of the coin. If it doesn’t cover enough of the reeds, the push rod plunger could slip as you are compressing it, possibly ruining the coin ring. You can fix this issue by placing the coin ring, (reeded side DOWN) into either your Universal 17°, 20°, or 25° reduction die to slightly shrink the outer diameter of the reeded side until the brass push rod better covers the reeds.

3.) Make sure that you don't over press the brass push rod plungers down the Swedish Wrap dies, especially when using a hydraulic press. After some practice, you’ll feel the resistance of when each push rod bottoms out in the dies.



(Arbor press, coins, and coins rings pictured are not included and are used for reference only.)



*** Here's why you should purchase your coin ring-making tools from our CoinRingUSA® Shop:

1.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.

2.) The level of quality of my tools is simply not duplicated elsewhere; as I use the highest quality materials that are precision CNC-machined to the finest standards by expert machinists.

3.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

4.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, techniques, and new tool updates.


5.) All of my coin ring-making tools are 100% guaranteed


6.) Why settle for buying inferior coin ring tools elsewhere? Buy from CoinRingUSA® and get the best!



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for various coin ring updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


To see the other coin ring-making tools available; be sure to visit: CoinRingUSA.com


Thanks, and here's to your coin ring-making success!



*** Shipping:

This set will be shipped by USPS Priority Mail with Signature Confirmation for U.S. residents.

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted

Reviews

5 out of 5 stars (1,379)

You may also like