• May include: A teal, articulated narwhal figurine with a segmented body, a long pointed tusk, and a smooth surface. The object features a small fin on the side and a tail at the end. Below the object, a dark label reads: PRINT IN PLACE · STL FILE.
  • May include: A teal narwhal figurine with four print-in-place joints that allow movement. The text above reads: Every joint moves, 4 print-in-place joints, each turns 8 degrees either way. The narwhal is shown in two different positions.
  • May include: A teal articulated narwhal figure with a segmented body and a long tusk. The text above reads: Prints flat, no supports. Lay the file on the bed as it comes. Every overhang is 45 degrees or less.
  • May include: Three articulated narwhal figures in light blue, white, and dark gray. The text above reads: Print it in any colour. Same file, three filaments. Each narwhal features a segmented body, side fins, and a long, straight tusk.
  • May include: A 3D printed joint diagram with teal and tan interlocking parts. Text reads: Cut through a joint, Measured on the file: at least 0.44 mm of air between the moving parts, so they print apart, and TWO COLOURS = TWO SEPARATE PARTS.
  • May include: A teal articulated narwhal figure with a long tusk. Text reads: Real size, 187 x 63 mm on the bed, 9.0 mm tall, as the file prints at 100 percent. Dimension lines indicate a length of 187 mm and a width of 63 mm.
  • May include: A digital download listing titled What you get. It includes an STL file for a narwhal-print-in-place model and a PDF print settings page. The text specifies 5 parts printed as one, no assembly, and compatibility with Cura, PrusaSlicer, Bambu Studio, and OrcaSlicer.
  • May include: A digital information card titled Print settings for FDM printers with a 0.4 mm nozzle. It lists specifications: PLA or PETG material, 0.2 mm layer height, 3 walls, 15 percent infill, no supports or brim, and 190 x 65 mm bed size.
  • May include: A teal articulated narwhal figurine featuring a segmented body, a long pointed tusk, and small side fins. The object is displayed against a dark grid background with a red rectangular label containing the text: FLAT ON THE BED, NO SUPPORTS.
  • May include: The Hazel Hollow 3D print line. New STL files every day, each checked in software before it is listed. Four 3D printed objects: an orange starfish, a teal articulated fish, a red circular ornament, and a purple spider.
  • May include: A teal, articulated narwhal figurine with a segmented body, a long pointed tusk, and a smooth surface. The object features a small fin on the side and a tail at the end. Below the object, a dark label reads: PRINT IN PLACE · STL FILE.
  • May include: A teal narwhal figurine with four print-in-place joints that allow movement. The text above reads: Every joint moves, 4 print-in-place joints, each turns 8 degrees either way. The narwhal is shown in two different positions.
  • May include: A teal articulated narwhal figure with a segmented body and a long tusk. The text above reads: Prints flat, no supports. Lay the file on the bed as it comes. Every overhang is 45 degrees or less.
  • May include: Three articulated narwhal figures in light blue, white, and dark gray. The text above reads: Print it in any colour. Same file, three filaments. Each narwhal features a segmented body, side fins, and a long, straight tusk.
  • May include: A 3D printed joint diagram with teal and tan interlocking parts. Text reads: Cut through a joint, Measured on the file: at least 0.44 mm of air between the moving parts, so they print apart, and TWO COLOURS = TWO SEPARATE PARTS.
  • May include: A teal articulated narwhal figure with a long tusk. Text reads: Real size, 187 x 63 mm on the bed, 9.0 mm tall, as the file prints at 100 percent. Dimension lines indicate a length of 187 mm and a width of 63 mm.
  • May include: A digital download listing titled What you get. It includes an STL file for a narwhal-print-in-place model and a PDF print settings page. The text specifies 5 parts printed as one, no assembly, and compatibility with Cura, PrusaSlicer, Bambu Studio, and OrcaSlicer.
  • May include: A digital information card titled Print settings for FDM printers with a 0.4 mm nozzle. It lists specifications: PLA or PETG material, 0.2 mm layer height, 3 walls, 15 percent infill, no supports or brim, and 190 x 65 mm bed size.
  • May include: A teal articulated narwhal figurine featuring a segmented body, a long pointed tusk, and small side fins. The object is displayed against a dark grid background with a red rectangular label containing the text: FLAT ON THE BED, NO SUPPORTS.
  • May include: The Hazel Hollow 3D print line. New STL files every day, each checked in software before it is listed. Four 3D printed objects: an orange starfish, a teal articulated fish, a red circular ornament, and a purple spider.
Report this item to Etsy

Print in Place Narwhal STL, Articulated Flexi Sea Toy Gift for 3D Printers

Item highlights

  • Digital download
  • Digital file type(s): 1 PDF, 1 other file

Seller's description

Print in place narwhal STL file that makes an articulated sea toy with 4 joints, for anyone who loves flexi models and ocean animals.

PLEASE NOTE: this is a digital STL file for 3D printers, not a physical item. Nothing is shipped, you print it yourself.
You get 1 STL model and a 1 page PDF with print settings.

WHAT YOU GET
narwhal-print-in-place.stl
narwhal-print-in-place-print-settings.pdf
Model size: 188 x 63 x 9.0 mm (millimeters).
Parts: 5 parts and 4 joints, already linked with no assembly. Each joint is designed to turn 8 degrees.
Checked in software: watertight, manifold, thinnest wall 1.37 mm, clearance between moving parts 0.44 mm.

PRINT SETTINGS
Material: PLA or PETG
Layer height: 0.2 mm
Walls: 3
Infill: 15 percent
Supports: none
Brim: none
Nozzle: 0.4 mm
Bed needed: 190 x 65 mm or larger
Tip: Print it in one go: the 5 parts and 4 joints come off the bed already linked.
Tip: If a joint feels stiff, bend each one gently a few times to free it.

HOW IT WORKS
Instant digital download, nothing is posted. Open the STL in any slicer (Cura, PrusaSlicer, Bambu Studio, OrcaSlicer) and print it flat as it comes. Keep the scale at 100 percent or larger.

LICENCE
Personal use. You may print it for yourself and as a gift. Please do not share, resell or redistribute the STL file, and do not sell prints of it.

Designed by us with the help of AI tools and code, then checked in software and reviewed by hand before it was listed.

View more

NowPrice:€2,62

Original Price: €5,23

50% off

•

Sale ends in 22:25:08

VAT Included

You can only make an offer when buying a single item

Delivery

Instant download

Your files will be available to download once payment is confirmed. Here's how.

Instant download items don't accept returns, exchanges or cancellations. Please contact the seller about any problems with your order.

Seller's description

Specifications

May include: A teal, articulated narwhal figurine with a segmented body, a long pointed tusk, and a smooth surface. The object features a small fin on the side and a tail at the end. Below the object, a dark label reads: PRINT IN PLACE · STL FILE.

Print in place narwhal STL file that makes an articulated sea toy with 4 joints, for anyone who loves flexi models and ocean animals.

PLEASE NOTE: this is a digital STL file for 3D printers, not a physical item. Nothing is shipped, you print it yourself.
You get 1 STL model and a 1 page PDF with print settings.

WHAT YOU GET
narwhal-print-in-place.stl
narwhal-print-in-place-print-settings.pdf
Model size: 188 x 63 x 9.0 mm (millimeters).
Parts: 5 parts and 4 joints, already linked with no assembly. Each joint is designed to turn 8 degrees.
Checked in software: watertight, manifold, thinnest wall 1.37 mm, clearance between moving parts 0.44 mm.

PRINT SETTINGS
Material: PLA or PETG
Layer height: 0.2 mm
Walls: 3
Infill: 15 percent
Supports: none
Brim: none
Nozzle: 0.4 mm
Bed needed: 190 x 65 mm or larger
Tip: Print it in one go: the 5 parts and 4 joints come off the bed already linked.
Tip: If a joint feels stiff, bend each one gently a few times to free it.

HOW IT WORKS
Instant digital download, nothing is posted. Open the STL in any slicer (Cura, PrusaSlicer, Bambu Studio, OrcaSlicer) and print it flat as it comes. Keep the scale at 100 percent or larger.

LICENCE
Personal use. You may print it for yourself and as a gift. Please do not share, resell or redistribute the STL file, and do not sell prints of it.

Designed by us with the help of AI tools and code, then checked in software and reviewed by hand before it was listed.

  • Made by
    HazelHollowPrints
  • Use
    Supplies for making crafts
  • Item type
    Digital download
  • Digital file type(s)
    1 PDF, 1 other file
Shop with confidence
Etsy Purchase Protection

If something goes wrong with an order, we've got your back on all eligible purchases. View program terms

Meet your seller

HazelHollowPrints
Bles Office
HazelHollowPrints ·

United States

We calculate this number using a recency-weighted average of all ratings, with a rating's value decreasing by half each year to best reflect the current experience. 5.0
·
8 sales
·
New on Etsy

You may also like

Disclaimer: Etsy assumes no responsibility for the accuracy, labeling, or content of sellers' listings and products. Electrical or electronic products may pose a risk of fire or electrocution. Vintage, handmade, refurbished, or modified electrical or electronic products may not meet current safety standards and may not be in safe working order. Inspect carefully before use and message the seller if you have concerns relating to the product. Do not use a vintage electrical or electronic item if its safety cannot be verified. To reduce the risk of fire, never leave vintage electrical or electronic products plugged in unattended. See Etsy's Terms of Use for more information.

Shoppers with similar taste loved these

Show more
Show more
Listed on Nov 5, 2026
Homepage Craft Supplies & Tools