SALE! UNIVERSAL Coin Ring Folding, Polishing and Finishing Kit

CoinRingUSA

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

SALE! UNIVERSAL Coin Ring Folding, Polishing and Finishing Kit

Message Seller

$54.95

Please select a quantity

Item details

Materials

Abrasion Resistant Rubber, Hardened and Wear Resistant Stainless Steel

At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.


The CoinRingUSA® UNIVERSAL Coin Ring Folding, Polishing and Finishing Kit includes the new and further-improved Set of Universal Stabilizer Folding Cones machined out of hardened wear-resistant stainless steel, as well as the Rounding, Finishing, and Polishing Mandrel Set for ultra smooth and professional-looking coin rings. This "2-in-1" kit is a great compliment to your coin ring tool set to begin and finish the coin ring-making process.



* NEW FOLDING TOOLS! FINALLY: NO MORE GROOVED AND WORN-OUT PLASTIC FOLDING CONES OR CHEWED-UP PLASTIC BEARING BALLS! *


* The IMPROVED smaller 1/4" size stainless steel folding cone is used in folding over any size coin with as small as a 1/4" center-punched hole, up to a 5/8"+ center-punched hole.

Since they are all made of stainless steel, this new smaller-sized folding cone eliminates the need to use the "starter cone" when using your arbor press or hydraulic press to fold your coins. (The stainless steel starter cone is still recommended when using a ring sizer machine where there is low clearance; or when doing the first initial fold with either of my 2 "Stabilizer" Reduction dies.)


Yet another improvement over all the softer folding cones made out of plastic, these new stabilizer folding cones are machined from wear-resistant hardened stainless steel, eliminating the need to purchase additional sets due to eventual wear-and-tear!



* WATCH AS I FULLY FOLD A MORGAN SILVER DOLLAR USING THESE NEW CONES WITH NO DAMAGE TO THE COINS’ INNER DETAIL BELOW:

https://www.youtube.com/watch?v=-XzuCCFtLn4



*** Here's what some folks had to say about these new coin ring-making tools:


"So you know how you make a cool coin ring then spend maybe an hour or so sanding it? (Depending on how high of a grade you want to go of course..) this awesome coin finishing kit whittles that time down to like 5-10 minutes. Simply amazing. Thanks again Martin for some BA tools!"
gsmcgee12 on Nov 17, 2016
5 out of 5 stars



"Hi Martin, just got your stainless steel folding cones and polishing kit. I have to say that the stainless steel cones are SUPERB, I can stretch faster, more accurately, and with lithium grease it's so smooth that it makes the process a lot easier, and therefore I have the confidence to make more expensive and desirable rings. Keep up the great work. All the best, Stu"



* MAKE SURE TO WRAP EACH FOLDING CONE WITH TEFLON PIPE THREAD TAPE PRIOR TO USE! *


* THE SET COMES WITH 4 HARDENED STAINLESS STEEL FOLDING CONES AND 1 SPACER


* Simply wrap each stainless steel folding cone with Teflon pipe thread tape prior to the folding process to completely protect your coin rings' inner detail. (See the last listing photo for an example of a fully folded-over Morgan Silver Dollar made with these new cones showing the teflon tape protecting all of the inner detail.)



For a complete detailed description of the hardened stainless steel folding cones, click on the link below:

https://www.etsy.com/listing/475323877/new-universal-stainless-steel-stabilizer?ref=shop_home_active_1



================================================



*** With the new rounding, finishing and polishing mandrel set, you can now obtain the best, most rounded and uniform high quality smooth, shiny, and even finish to the non-reeded OR the reeded edges of your coin rings by quickly getting rid of those unsightly, uneven, flat edges.

No more having to use nail buffing files, sanding by hand, using steel round files or de-burring tools to finish your rough coin ring edges... nothing else performs better in completing this critical aspect of coin ring-making!

* You can also use this tool to both hold and sand off the "Coin Ring Lips"; or the lip that's underneath the reeded side of the coin (if you choose to) for a more uniform look. The abrasion-resistant rubber mandrels also naturally protects the coins' detail from damage while you're working it, so there's no need to use a screw to hold the coin in place, which could cause damage to the coins' surface... it's like having multiple tools-in-one!



For a complete detailed description of the Rounding,Finishing, and Polishing Mandrel Set for professional-looking coin rings, click on the link below:

https://www.etsy.com/listing/267370914/coin-ring-roundingfinishingpolishing?ref=shop_home_active_7



(Coins and ring sizer machine pictured are not included and are used for reference only).



* Here’s why you should buy these folding and finishing tools from the CoinRingUSA® Shop:

1. My upfront costs are higher in order to bring you the toughest and best quality material available without sacrificing the coins’ detail. For example, each folding cone is CNC-machined and personally inspected by hand by expert machinists.

2. These folding cones are designed to last because they won't wear out, unlike the softer cones made out of a light brown plastic material called phenolic.

3. My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

4. The level of quality of my tools is never duplicated elsewhere.

5. The optimal degree of angle is used on these cones for folding your coins.

6. I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.

7. All of my tools are 100% guaranteed

8. Why pay a little less for folding cones that will wear out? Buy from CoinRingUSA® and get the best in quality tooling!



*** Get my video updates and follow me on YouTube by clicking here: youtube.com/CoinRingUSA


Thanks, and here's to your coin ring-making success!



SAFETY FIRST

--- CAUTION! This is a small part and can be considered a choking hazard. Please keep away from children and pets!
--- Always wear safety glasses.
--- Keep fingers, long hair, and loose clothing away from any pinch points or open flame.



*** Shipping:

This set will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.


The CoinRingUSA® UNIVERSAL Coin Ring Folding, Polishing and Finishing Kit includes the new and further-improved Set of Universal Stabilizer Folding Cones machined out of hardened wear-resistant stainless steel, as well as the Rounding, Finishing, and Polishing Mandrel Set for ultra smooth and professional-looking coin rings. This "2-in-1" kit is a great compliment to your coin ring tool set to begin and finish the coin ring-making process.



* NEW FOLDING TOOLS! FINALLY: NO MORE GROOVED AND WORN-OUT PLASTIC FOLDING CONES OR CHEWED-UP PLASTIC BEARING BALLS! *


* The IMPROVED smaller 1/4" size stainless steel folding cone is used in folding over any size coin with as small as a 1/4" center-punched hole, up to a 5/8"+ center-punched hole.

Since they are all made of stainless steel, this new smaller-sized folding cone eliminates the need to use the "starter cone" when using your arbor press or hydraulic press to fold your coins. (The stainless steel starter cone is still recommended when using a ring sizer machine where there is low clearance; or when doing the first initial fold with either of my 2 "Stabilizer" Reduction dies.)


Yet another improvement over all the softer folding cones made out of plastic, these new stabilizer folding cones are machined from wear-resistant hardened stainless steel, eliminating the need to purchase additional sets due to eventual wear-and-tear!



* WATCH AS I FULLY FOLD A MORGAN SILVER DOLLAR USING THESE NEW CONES WITH NO DAMAGE TO THE COINS’ INNER DETAIL BELOW:

https://www.youtube.com/watch?v=-XzuCCFtLn4



*** Here's what some folks had to say about these new coin ring-making tools:


"So you know how you make a cool coin ring then spend maybe an hour or so sanding it? (Depending on how high of a grade you want to go of course..) this awesome coin finishing kit whittles that time down to like 5-10 minutes. Simply amazing. Thanks again Martin for some BA tools!"
gsmcgee12 on Nov 17, 2016
5 out of 5 stars



"Hi Martin, just got your stainless steel folding cones and polishing kit. I have to say that the stainless steel cones are SUPERB, I can stretch faster, more accurately, and with lithium grease it's so smooth that it makes the process a lot easier, and therefore I have the confidence to make more expensive and desirable rings. Keep up the great work. All the best, Stu"



* MAKE SURE TO WRAP EACH FOLDING CONE WITH TEFLON PIPE THREAD TAPE PRIOR TO USE! *


* THE SET COMES WITH 4 HARDENED STAINLESS STEEL FOLDING CONES AND 1 SPACER


* Simply wrap each stainless steel folding cone with Teflon pipe thread tape prior to the folding process to completely protect your coin rings' inner detail. (See the last listing photo for an example of a fully folded-over Morgan Silver Dollar made with these new cones showing the teflon tape protecting all of the inner detail.)



For a complete detailed description of the hardened stainless steel folding cones, click on the link below:

https://www.etsy.com/listing/475323877/new-universal-stainless-steel-stabilizer?ref=shop_home_active_1



================================================



*** With the new rounding, finishing and polishing mandrel set, you can now obtain the best, most rounded and uniform high quality smooth, shiny, and even finish to the non-reeded OR the reeded edges of your coin rings by quickly getting rid of those unsightly, uneven, flat edges.

No more having to use nail buffing files, sanding by hand, using steel round files or de-burring tools to finish your rough coin ring edges... nothing else performs better in completing this critical aspect of coin ring-making!

* You can also use this tool to both hold and sand off the "Coin Ring Lips"; or the lip that's underneath the reeded side of the coin (if you choose to) for a more uniform look. The abrasion-resistant rubber mandrels also naturally protects the coins' detail from damage while you're working it, so there's no need to use a screw to hold the coin in place, which could cause damage to the coins' surface... it's like having multiple tools-in-one!



For a complete detailed description of the Rounding,Finishing, and Polishing Mandrel Set for professional-looking coin rings, click on the link below:

https://www.etsy.com/listing/267370914/coin-ring-roundingfinishingpolishing?ref=shop_home_active_7



(Coins and ring sizer machine pictured are not included and are used for reference only).



* Here’s why you should buy these folding and finishing tools from the CoinRingUSA® Shop:

1. My upfront costs are higher in order to bring you the toughest and best quality material available without sacrificing the coins’ detail. For example, each folding cone is CNC-machined and personally inspected by hand by expert machinists.

2. These folding cones are designed to last because they won't wear out, unlike the softer cones made out of a light brown plastic material called phenolic.

3. My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

4. The level of quality of my tools is never duplicated elsewhere.

5. The optimal degree of angle is used on these cones for folding your coins.

6. I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.

7. All of my tools are 100% guaranteed

8. Why pay a little less for folding cones that will wear out? Buy from CoinRingUSA® and get the best in quality tooling!



*** Get my video updates and follow me on YouTube by clicking here: youtube.com/CoinRingUSA


Thanks, and here's to your coin ring-making success!



SAFETY FIRST

--- CAUTION! This is a small part and can be considered a choking hazard. Please keep away from children and pets!
--- Always wear safety glasses.
--- Keep fingers, long hair, and loose clothing away from any pinch points or open flame.



*** Shipping:

This set will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted

Reviews

5 out of 5 stars (1,379)

You may also like