Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite your own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

Close
You don't have any treasuries yet. Enter a title below to create one.
Close

This item has been added.

View your treasury.

8-Foot Sliding Barn Door Hardware (Black) - Includes Easy Step-By-Step Installation Video - Ultra Quiet, Successfully Tested 100,000 Rolls

Like this item?

Add it to your favorites to revisit it later.
Favorite

Description

Premium quality parts are provided along with the a completely turnkey experience. Our hardware kits are installed in thousands of homes nationwide, so we know the details our customers want and need to know for their project to go smoothly. This hardware set includes all hardware, nuts, and bolts needed to install a sliding barn door.


FEATURES:

• INCLUDES INSTALLATION VIDEO: Watch our easy Step-By-Step video to simplify the installation process. Our experienced customer service team is U.S. based and quick to respond to any questions
• ONE-PIECE RAIL: One full 96" rail is included. Others discretely provide two separate connecting rails, which is structurally less strong, more difficult to install correctly, and requires a disruptive rail connector
• INDUSTRIAL STYLE: Add an industrial, modern, or rustic look to any space
• SUPERIOR STRENGTH: We take pride in delivering a top quality product with unmatched customer service
• MONEY BACK GUARANTEE: 100% money back guarantee if you are not satisfied with this product


INSIDE THE KIT:

• 8-Foot Rail: A single rail includes six pre-drilled holes every 16" on center. Holes begin 7 1/2" on center from each end of the rail. Rail is constructed of solid 1/4" thick steel, finished with our highly durable powder coating. This gets baked onto the steel at 400 degrees and creates the strongest bond possible.
• Rail Hardware: Six lag bolts (of the highest grade available) with washers and five rail spacers attach the rail securely to the studs, or header board, for supporting up to 225 pounds comfortably.
• 2 Hangers: These hangers are built with our premium nylon wheels, which are often an expensive upgrade at other shops. We made these the standard wheel for all our kits, and have tested our finished hangers beyond 100,000 rolls. Two different sets of bolts for attaching hangers to the door are included in order to accommodate doors ranging from 1 1/4" to 1 3/4" thick.
• 2 Door Stoppers: Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close.
• Floor Guide: A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard.

We include these detailed measurements and installation tips in our step-by-step video tutorial and written instructions. In addition, our experienced U.S. based professionals, who have actually installed our kits, are quick to respond and happy to answer any questions from the planning to installation of your project.


FAQ:

Q: What if my studs don't line up with the pre-drilled holes in the rail?

A: Simply attach a 1" thick header board into your studs first, and then the rail can attach anywhere into the header board. Many customers prefer this look anyway. Customers have painted the header to match the wall color to blend in, or to match the door.

Q: How thick of a door will this kit work with?

A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 1/4" to 1 3/4", but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below:

2 3/16" - door depth - trim depth - 3/16" (recommended gap from door to trim/wall)

If your answer is 0 or greater, then you're fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board.

Q: How much space do I need above the doorway?

A: You will need a minimum of 6" from the top of your door to the ceiling (or crown moulding, if any) for this kit to fit correctly.

Q: Can I cut this rail down to the exact size I need?

A: Absolutely! We recommend using a reciprocating saw or angle grinder.
Premium quality parts are provided along with the a completely turnkey experience. Our hardware kits are installed in thousands of homes nationwide, so we know the details our customers want and need to know for their project to go smoothly. This hardware set includes all hardware, nuts, and bolts needed to install a sliding barn door.


FEATURES:

• INCLUDES INSTALLATION VIDEO: Watch our easy Step-By-Step video to simplify the installation process. Our experienced customer service team is U.S. based and quick to respond to any questions
• ONE-PIECE RAIL: One full 96" rail is included. Others discretely provide two separate connecting rails, which is structurally less strong, more difficult to install correctly, and requires a disruptive rail connector
• INDUSTRIAL STYLE: Add an industrial, modern, or rustic look to any space
• SUPERIOR STRENGTH: We take pride in delivering a top quality product with unmatched customer service
• MONEY BACK GUARANTEE: 100% money back guarantee if you are not satisfied with this product


INSIDE THE KIT:

• 8-Foot Rail: A single rail includes six pre-drilled holes every 16" on center. Holes begin 7 1/2" on center from each end of the rail. Rail is constructed of solid 1/4" thick steel, finished with our highly durable powder coating. This gets baked onto the steel at 400 degrees and creates the strongest bond possible.
• Rail Hardware: Six lag bolts (of the highest grade available) with washers and five rail spacers attach the rail securely to the studs, or header board, for supporting up to 225 pounds comfortably.
• 2 Hangers: These hangers are built with our premium nylon wheels, which are often an expensive upgrade at other shops. We made these the standard wheel for all our kits, and have tested our finished hangers beyond 100,000 rolls. Two different sets of bolts for attaching hangers to the door are included in order to accommodate doors ranging from 1 1/4" to 1 3/4" thick.
• 2 Door Stoppers: Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close.
• Floor Guide: A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard.

We include these detailed measurements and installation tips in our step-by-step video tutorial and written instructions. In addition, our experienced U.S. based professionals, who have actually installed our kits, are quick to respond and happy to answer any questions from the planning to installation of your project.


FAQ:

Q: What if my studs don't line up with the pre-drilled holes in the rail?

A: Simply attach a 1" thick header board into your studs first, and then the rail can attach anywhere into the header board. Many customers prefer this look anyway. Customers have painted the header to match the wall color to blend in, or to match the door.

Q: How thick of a door will this kit work with?

A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 1/4" to 1 3/4", but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below:

2 3/16" - door depth - trim depth - 3/16" (recommended gap from door to trim/wall)

If your answer is 0 or greater, then you're fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board.

Q: How much space do I need above the doorway?

A: You will need a minimum of 6" from the top of your door to the ceiling (or crown moulding, if any) for this kit to fit correctly.

Q: Can I cut this rail down to the exact size I need?

A: Absolutely! We recommend using a reciprocating saw or angle grinder.

Payment options

Secure options
  • Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.

Returns & exchanges

I gladly accept returns
Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery
I don't accept exchanges or cancellations
But please contact me if you have any problems with your order.
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.

8-Foot Sliding Barn Door Hardware (Black) - Includes Easy Step-By-Step Installation Video - Ultra Quiet, Successfully Tested 100,000 Rolls

Ask a question
$109.95
Other people want this. 5 people have this in their carts right now.

Overview

  • Craft type: Home improvement
  • Material: Steel
  • Feedback: 124 reviews
  • Favorited by: 960 people
  • Gift message available
This shop accepts Etsy gift cards

Shipping & returns

Get it fast! Ready to ship in 1–2 business days.
From Kansas City, Missouri
Returns accepted
See return policy

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…