Beer tap handle, Wood with chalkboard, 6 inches tall

A custom homemade tap handle made from the hardwood of your choice with an inset wooden board onto which your custom graphic is engraved and painted, and a separate wooden chalkboard for labeling what's on tap. The handle is 6 inches tall, 2.6 inches wide, and approximately .875 inches thick. There are several graphic designs to choose from (see 5th picture). You may add up to 20 letters both above and below the graphic. Please contact me through Etsy Conversations if you would like to use a different graphic and I will create a custom listing.

This handle is available in walnut, padauk, sassfras, and cherry hardwoods (see 4th picture). This handle is available single-sided only. The backside of the handle will look as shown in the 4th picture.

The tap handle is coated in polyurethane for long life. There is a threaded insert in the base to screw into a North American standard 3/8"-16UNC threaded tap.

Due to the size of the chalkboard, it is recommended that a fine point chalkboard marker be used. Please contact me for recommendations.

Please list what you would like for the UPPER TEXT and the LOWER TEXT (each maximum 20 letters, spaces included) in the box above before adding the item to your cart. Also specify which graphic and established date you would like. Prior to engraving, I will send a digital mockup through Etsy Conversations to verify that the design is correct.

Please contact me through Etsy Conversations if you have any questions or would like a different graphic than what is shown. Custom graphics and text may not be trademarked or copyrighted.