SALE! (1.7" x 1.8") MEGA Universal Folding & Reduction Die for Challenge Coins and Big Rounds; Hardened Stainless Steel @ 17 Degrees

CoinRingUSA

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

SALE! (1.7" x 1.8") MEGA Universal Folding & Reduction Die for Challenge Coins and Big Rounds; Hardened Stainless Steel @ 17 Degrees

Message Seller

$31.95

Please select a quantity

Item details

Material

Hardened and Wear Resistant Stainless Steel

At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of folding/reduction dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective folding and reduction of any coin to make into a coin ring on the market.



NEW! 1.7" x 1.8" MEGA (17° taper) Universal Folding and Reduction die Description:


For those Monster-sized Challenge Coins, rounds, tokens or medallions, this new “MEGA” Folding and Reduction Die picks up where the previous-largest die (at 1.5” x 1.6” in diameter) left off.


With the advent of the “Swedish Wrap Method”, many of the larger coins (such as Challenge Coins) that are often 1.75” in outer diameter can now be easily folded over using this new die.


This newest double-sided Universal folding and reduction die has a 1.7" opening on one side, and a 1.8" opening on the other side, and is machined at 17° degrees, which is crucial for the initial folding and reducing when making coin rings. Folding is best done with the new improved stainless steel folding cones and spacer set, (each wrapped in pipe thread tape), for complete preservation of the inner detail of each coin.



*** Here are some reviews received about my coin ring tools:

"Martin saved my life. Again. Okay, maybe it wasn't quite that serious, but I had a gap in my dies that I didn't expect. This monster ring is at least twice as thick as a regular challenge coin and I think slightly larger in diameter. I did one without the proper die and for a few rounds with it, I wasn't quite sure who was going to win. Fortunately, I did, but I am seeing to it that the odds are in my favor next time. Thanks, Brother!"
Michael on Jun 21, 2017
5 out of 5 stars


"A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars


"Martin, as usual your folding dies are the best. Made of the highest quality steel. Made with precision tooling. Keep up the great work. Thanks, The Coin Ring Man"
Daniel Little on Dec 17, 2016
5 out of 5 stars



"Great addition to my tools !! Nice job Martin 👍🏻"
Dave Vachon on Nov 25, 2016
5 out of 5 stars



You can find the set of new folding cones in the link below:

https://www.etsy.com/listing/475323877/universal-stainless-steel-stabilizer?ref=shop_home_active_8



This new MEGA folding/reduction die will work under any arbor or hydraulic shop press.


*** It will also fit under the newer model Durston ring sizer machine (with the larger square one-piece handle) without any modification.



*** If you have the OLDER Durston model ring sizer (with the thinner, round screw-in handle), you can either remove the center pin that holds the reducing wheel in place to use this new die, or; you can remove the small amount of metal stock located at the base of the ring sizer immediately behind the reducing wheel by simply filing it down. (Listing photos 2 and 3 show the MEGA die being used on my older model Durston ring sizer machine after the filing modification with the center pin still intact).

(See the last listing photo for reference of the pen pointing to the small area that needs to be filed down.)

*Please be aware that any modifications that you make to your ring sizer machine could void the warranty if your machine still has one in effect.


If you have another brand of ring sizer machine, simply make sure that you have at least 1.940” of clearance under the ram head to use this MEGA die. This is best measured with a pair of digital calipers.


(Coin and arbor press are not included and are meant for reference only).


Be sure to Favorite my Etsy shop and Subscribe to my YouTube channel for the latest updates.



*** Here’s why you should purchase your tools from the CoinRingUSA® Shop:

1. Wear-resistant and hardened stainless steel is used. Each reduction die is precision CNC-machined, is buffed and polished and personally inspected by hand by expert machinists.

2. My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

3. The level of quality of my tools is simply not duplicated elsewhere.

4. The optimal degree of angle is used for maximum efficiency and ease of folding and coin, even the .

5. I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions.

Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.

6. All of my tools are 100% guaranteed

7. Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



Thanks, and here's to your coin ring-making success!



*** SAFETY FIRST ***

--- Always wear safety glasses.
--- Keep fingers, long hair, and loose clothing away from any pinch points or open flame.
--- Make sure to anneal, (heat, then quench) the coin often as you're working it.



•To view all of my videos on coin ring tips and tricks, subscribe to my YouTube channel by typing “CoinRingUSA” in the YouTube search box, or click on the following link: youtube.com/CoinRingUSA


•To see all of the coin ring-making tools that I have to offer, please visit: CoinRingUSA.com



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of folding/reduction dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective folding and reduction of any coin to make into a coin ring on the market.



NEW! 1.7" x 1.8" MEGA (17° taper) Universal Folding and Reduction die Description:


For those Monster-sized Challenge Coins, rounds, tokens or medallions, this new “MEGA” Folding and Reduction Die picks up where the previous-largest die (at 1.5” x 1.6” in diameter) left off.


With the advent of the “Swedish Wrap Method”, many of the larger coins (such as Challenge Coins) that are often 1.75” in outer diameter can now be easily folded over using this new die.


This newest double-sided Universal folding and reduction die has a 1.7" opening on one side, and a 1.8" opening on the other side, and is machined at 17° degrees, which is crucial for the initial folding and reducing when making coin rings. Folding is best done with the new improved stainless steel folding cones and spacer set, (each wrapped in pipe thread tape), for complete preservation of the inner detail of each coin.



*** Here are some reviews received about my coin ring tools:

"Martin saved my life. Again. Okay, maybe it wasn't quite that serious, but I had a gap in my dies that I didn't expect. This monster ring is at least twice as thick as a regular challenge coin and I think slightly larger in diameter. I did one without the proper die and for a few rounds with it, I wasn't quite sure who was going to win. Fortunately, I did, but I am seeing to it that the odds are in my favor next time. Thanks, Brother!"
Michael on Jun 21, 2017
5 out of 5 stars


"A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars


"Martin, as usual your folding dies are the best. Made of the highest quality steel. Made with precision tooling. Keep up the great work. Thanks, The Coin Ring Man"
Daniel Little on Dec 17, 2016
5 out of 5 stars



"Great addition to my tools !! Nice job Martin 👍🏻"
Dave Vachon on Nov 25, 2016
5 out of 5 stars



You can find the set of new folding cones in the link below:

https://www.etsy.com/listing/475323877/universal-stainless-steel-stabilizer?ref=shop_home_active_8



This new MEGA folding/reduction die will work under any arbor or hydraulic shop press.


*** It will also fit under the newer model Durston ring sizer machine (with the larger square one-piece handle) without any modification.



*** If you have the OLDER Durston model ring sizer (with the thinner, round screw-in handle), you can either remove the center pin that holds the reducing wheel in place to use this new die, or; you can remove the small amount of metal stock located at the base of the ring sizer immediately behind the reducing wheel by simply filing it down. (Listing photos 2 and 3 show the MEGA die being used on my older model Durston ring sizer machine after the filing modification with the center pin still intact).

(See the last listing photo for reference of the pen pointing to the small area that needs to be filed down.)

*Please be aware that any modifications that you make to your ring sizer machine could void the warranty if your machine still has one in effect.


If you have another brand of ring sizer machine, simply make sure that you have at least 1.940” of clearance under the ram head to use this MEGA die. This is best measured with a pair of digital calipers.


(Coin and arbor press are not included and are meant for reference only).


Be sure to Favorite my Etsy shop and Subscribe to my YouTube channel for the latest updates.



*** Here’s why you should purchase your tools from the CoinRingUSA® Shop:

1. Wear-resistant and hardened stainless steel is used. Each reduction die is precision CNC-machined, is buffed and polished and personally inspected by hand by expert machinists.

2. My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

3. The level of quality of my tools is simply not duplicated elsewhere.

4. The optimal degree of angle is used for maximum efficiency and ease of folding and coin, even the .

5. I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions.

Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.

6. All of my tools are 100% guaranteed

7. Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



Thanks, and here's to your coin ring-making success!



*** SAFETY FIRST ***

--- Always wear safety glasses.
--- Keep fingers, long hair, and loose clothing away from any pinch points or open flame.
--- Make sure to anneal, (heat, then quench) the coin often as you're working it.



•To view all of my videos on coin ring tips and tricks, subscribe to my YouTube channel by typing “CoinRingUSA” in the YouTube search box, or click on the following link: youtube.com/CoinRingUSA


•To see all of the coin ring-making tools that I have to offer, please visit: CoinRingUSA.com



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted
See return policy

Reviews

5 out of 5 stars (1,370)

Returns & exchanges

I gladly accept returns and exchanges

Contact me within: 7 days of delivery
Ship items back within: 14 days of delivery

I don't accept cancellations

But please contact me if you have any problems with your order.

Returns and exchange details

Returned items must be in their new condition. Buyer pays for return shipping, and a 10% restocking fee will apply.

Shipping policies

*** NOTE *** Please combine the saved items in your shopping cart BEFORE you check out in order to save on shipping costs.

Processing time may vary between items ordered.

My Shop ships worldwide! If you are ordering from outside of the United States, please be aware that your country may impose a VAT, (Value Added Tax); (also known as a Customs Duty), on the order. You will be asked to pay this additional fee before receiving your parcel. Please research your country's laws and any additional fees that may be placed on the items you'd like to order.

Also be aware that your Customs may delay the package for an unknown period of time. You will need to inquire with your local Post Office or postal service for further delivery information. My Shop is not responsible for customs delays.

Customs forms paperwork will be placed on the package to expedite the process.

Payments

Secure options
Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
I accept PayPal and all major Credit cards and Debit cards. If you do not have a PayPal account, you can still make your payment through Paypal using your credit or debit card, or; you can pay through Etsy directly for your items.

Major Debit or Credit Cards:

- VISA
- MasterCard
- American Express
- Discover

Additional policies

Thank you for your business! Reviews of the tools purchased are always appreciated.

If you would like to place a custom order, please select the blue "Request Custom Order" tab on my Shop's Homepage, or send me a message through Etsy with your request.

Slight non-functional variations of things such as color, texture, and engraving on items may occur from time to time.

SAFETY FIRST! Always use safety glasses and keep hair and loose clothing away from pinch points and sources of heat while working.

You may also like