1x Guns Bullets Cross - Vinyl Decal Sticker
Buy 2 Get 1 Free OF SAME STYLE, SIZE AND COLOR!
So buy 4 get 2 FREE and on and on... of same style, size and color!
Same for multi-packs if offered also!
No mixing of styles, sizes or colors for buy 2 get 1 deal...

WE ARE FLEXIBLE
Please contact us for custom sizes, colors or quantities!
All ZippyStickers.com vinyl decal stickers are made from Oracal 651 indoor/outdoor vinyl.

All ZippyStickers.com vinyl decal stickers are die-cut with no background!

They can be applied to almost any surface. The surface must be smooth and clean.

All ZippyStickers.com vinyl decal stickers come with clear transfer tape (may have gridlines) and are ready to be applied to the surface.
Please note that these ZippyStickers.com vinyl decal stickers are one time use only and cannot be moved or reapplied once installed.

Application tips:
1. NO you don’t have to put the pieces on individually… they transfer all at once.
2. Do not just peel off wax backing and try to put on decal, follow steps below for application.
3. Do not apply on extreme cold or hot surfaces. Ideal temperature must be between 60°F and 90°F. Basically apply in the shade not in the sun or rain or snow.
4. Do not touch the adhesive backing, oils from your skin will prevent sticking.
5. Before applying ZippyStickers.com vinyl decal stickers be sure to clean the area thoroughly.

Application instructions:
1. READ THROUGH ALL STEPS BELOW FIRST
2. Sometimes a wrinkle or two may appear during shipping so not to worry… simply rub the decal with your fingers, credit card (or similar… DVD cases work good for larger graphics) to be sure the transfer tape is properly adhered to the decal.
3. Clean and dry the desired area. Decals will stick best to clean smooth surfaces.
4. Carefully position the decal to the desired area WITHOUT REMOVING WAX BACKING.
5. Once you are sure of position put a strip of masking (or painters) tape across the top (If surface is really curved tape the left or right side) of the decal to hold in place.
6. Next flip decal up and STARTING FROM THE TOP (Or the side you taped) remove the wax backing slowly and rub the decal with a credit card (or similar) onto the surface as you peel off the wax backing making sure the decal stays adhered to the transparent transfer tape.
7. Remove the masking (or painters) tape and rub the decal from one side to the other, eliminating any air bubbles. Use credit card (or similar… DVD cases work good for larger graphics) to make sure the entire decal is fully adhered to the surface.
8. Slowly remove the transfer tape peeling it back on top of itself (Don’t peel pulling straight out but peel at opposing angle), making sure no part of the decal remains on the transfer tape.
9. Check for air bubbles. Cover decal with wax backing and rub over air bubble pushing it to the closest edge. If that does not work use a pin and make a tiny hole to allow the air out and it will become virtually invisible.


Enjoy your new ZippyStickers.com vinyl decal sticker!!!


--- PLEASE VISIT OUR STORE FOR OTHER ITEMS!!! ---


***Decals may appear larger in photos to show detail. Please see the product dimensions***
***We are not responsible for application errors.***