Whoa! You can't buy your own item.

Replacement 1/2" inch Stainless Steel Stabilizer Folding Cone

Replacement 1/2" inch Stainless Steel Stabilizer Folding Cone

Ask a question

$11.95

Please select a quantity
Other people want this. 3 people have this in their carts right now.

Overview

  • Craft type: Jewelry making, Metalworking
  • Material: Hardened and Wear Resistant Stainless Steel
  • Favorited by: 19 people
  • Gift message available
This shop accepts Etsy gift cards

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted
Exceptions may apply. See return policy

Description

At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.



* NO MORE GROOVED AND WORN-OUT CONES OR CHEWED-UP PLASTIC BEARING BALLS! *


*This 1/2" folding cone made from hardened stainless steel is intended to be used as a replacement to your worn or damaged 1/2" phenolic or plastic folding cone. This is the 2nd sized cone in the set.


Yet another improvement over all the softer folding cones made out of plastic, these new stabilizer folding cones are machined from wear-resistant hardened stainless steel, eliminating the need to purchase additional sets due to eventual wear-and-tear.



* The full set of 4 hardened Stainless Steel folding cones is recommended and can be seen in the link below:

https://www.etsy.com/listing/475323877/new-stainless-steel-universal-stabilizer?ref=shop_home_active_2



*The 1/2" size stabilizer folding cone is used in folding over Half Dollar, Dollar, and American Silver Eagle-sized coins. This is the first cone that you would use when beginning to fold a Half Dollar-sized coin over with a 7/16” (11mm) hole in the center.



* WATCH AS I FULLY FOLD A MORGAN SILVER DOLLAR USING THESE NEW CONES WITH NO DAMAGE TO THE COINS’ INNER DETAIL BELOW:

https://www.youtube.com/watch?v=-XzuCCFtLn4



These Stabilizer Folding Cones are a more effective and efficient option than using the delrin bearing balls. Their design allows them to do a much better job of keeping the coin level as it’s being folded over into the reduction dies when using either a Ring Sizer Machine, an Arbor Press, or a Hydraulic Press.



To use, you simply set the coin level into your reduction die, insert an appropriate size folding cone into the beveled center punched hole, and then begin to press the coin down into the die. As you continue to fold your coin down into the reduction die, you simply switch to a SMALLER diameter-sized reduction die and a LARGER-sized cone (and the spacer provided if needed) to finish the coin’s folding-over process.



Below are recent reviews from clients:

--- "Quarter rings are my biggest sellers. I do large production runs of quarters, so I don't need a stuck coin slowing me down. And we all know how frustrating is can be to remove a stuck coin from one of the older cones. These are just what the doctor ordered."
Jeff Morgan and Ajax of "Jeff Morgan Designs" on Sep 15, 2016
5 out of 5 stars


--- "Awesome folding cones, so glad I purchased this set, never have to replace it"
Dan Rivera on Sep 12, 2016
5 out of 5 stars


--- "These cones are on another level. Just put plumbers tape on the cones so you don't ruin the inner detail and its golden."
Jody Pettit on Sep 9, 2016
5 out of 5 stars



* MAKE SURE TO WRAP EACH FOLDING CONE WITH TEFLON® PIPE THREAD TAPE PRIOR TO USE! *

* To use, simply wrap each stainless steel folding cone with pipe thread seal tape prior to the folding process to completely protect your coin rings' inner detail. (See the last listing photo for an example of a fully folded-over Morgan Silver Dollar made with these new cones showing the Teflon® pipe thread seal tape absorbing the metal-on-metal impact and protecting all of the inner detail.)



These new hardened stainless steel folding cones also work great with the “Stabilizer” Reduction Dies, as you end up having DOUBLE the stability of both the design of the die itself as well as the folding cone when folding over any US Quarter, US Half Dollar, Morgan/Peace Dollar, or the American Silver Eagle!



Here’s why you should buy your tools from the CoinRingUSA® Shop:

1. Each folding cone is made from high quality hardened stainless steel and is CNC-machined.

2. My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

3. The level of quality of my tools is never duplicated elsewhere.

4. The optimal degree of angle is used on these cones for folding your coins.

5. I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.

6. All of my tools are 100% guaranteed

7. Why pay a little less for inferior folding cones? Buy from CoinRingUSA® to get the highest quality tools!



*** IMPORTANT NOTE ***
You don’t need to memorize which particular size folding cone fits into which size center hole in whichever coin you are about to begin folding over. Instead, you want to pick the Folding Cone that fits into your coin’s center hole, that will also fit under the ram head on your Ring Sizing Machine, arbor or hydraulic press.

As you continue to fold your coin down into the reduction die, you simply switch to a SMALLER diameter-sized reduction die and a LARGER-sized cone (and the spacer provided if needed) to finish the coin’s folding-over process.


(Coins pictured are not included and are meant for reference only).



*** SAFETY FIRST ***

--- CAUTION! These cones are small parts and can be considered a choking hazard. Please keep away from children and pets!
--- Always wear safety glasses.
--- Keep fingers, long hair, and loose clothing away from any pinch points or open flame.
--- Make sure to anneal, (heat, then quench) the coin often as you're working it often.



•To view all of my videos on coin ring tips and tricks, subscribe to my YouTube channel by typing “CoinRingUSA” in the YouTube search box, or click here: youtube.com/CoinRingUSA

•To see all of the coin ring-making tools that I have to offer, please visit: CoinRingUSA.com

Thanks, and here's to your coin ring-making success!



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.



* NO MORE GROOVED AND WORN-OUT CONES OR CHEWED-UP PLASTIC BEARING BALLS! *


*This 1/2" folding cone made from hardened stainless steel is intended to be used as a replacement to your worn or damaged 1/2" phenolic or plastic folding cone. This is the 2nd sized cone in the set.


Yet another improvement over all the softer folding cones made out of plastic, these new stabilizer folding cones are machined from wear-resistant hardened stainless steel, eliminating the need to purchase additional sets due to eventual wear-and-tear.



* The full set of 4 hardened Stainless Steel folding cones is recommended and can be seen in the link below:

https://www.etsy.com/listing/475323877/new-stainless-steel-universal-stabilizer?ref=shop_home_active_2



*The 1/2" size stabilizer folding cone is used in folding over Half Dollar, Dollar, and American Silver Eagle-sized coins. This is the first cone that you would use when beginning to fold a Half Dollar-sized coin over with a 7/16” (11mm) hole in the center.



* WATCH AS I FULLY FOLD A MORGAN SILVER DOLLAR USING THESE NEW CONES WITH NO DAMAGE TO THE COINS’ INNER DETAIL BELOW:

https://www.youtube.com/watch?v=-XzuCCFtLn4



These Stabilizer Folding Cones are a more effective and efficient option than using the delrin bearing balls. Their design allows them to do a much better job of keeping the coin level as it’s being folded over into the reduction dies when using either a Ring Sizer Machine, an Arbor Press, or a Hydraulic Press.



To use, you simply set the coin level into your reduction die, insert an appropriate size folding cone into the beveled center punched hole, and then begin to press the coin down into the die. As you continue to fold your coin down into the reduction die, you simply switch to a SMALLER diameter-sized reduction die and a LARGER-sized cone (and the spacer provided if needed) to finish the coin’s folding-over process.



Below are recent reviews from clients:

--- "Quarter rings are my biggest sellers. I do large production runs of quarters, so I don't need a stuck coin slowing me down. And we all know how frustrating is can be to remove a stuck coin from one of the older cones. These are just what the doctor ordered."
Jeff Morgan and Ajax of "Jeff Morgan Designs" on Sep 15, 2016
5 out of 5 stars


--- "Awesome folding cones, so glad I purchased this set, never have to replace it"
Dan Rivera on Sep 12, 2016
5 out of 5 stars


--- "These cones are on another level. Just put plumbers tape on the cones so you don't ruin the inner detail and its golden."
Jody Pettit on Sep 9, 2016
5 out of 5 stars



* MAKE SURE TO WRAP EACH FOLDING CONE WITH TEFLON® PIPE THREAD TAPE PRIOR TO USE! *

* To use, simply wrap each stainless steel folding cone with pipe thread seal tape prior to the folding process to completely protect your coin rings' inner detail. (See the last listing photo for an example of a fully folded-over Morgan Silver Dollar made with these new cones showing the Teflon® pipe thread seal tape absorbing the metal-on-metal impact and protecting all of the inner detail.)



These new hardened stainless steel folding cones also work great with the “Stabilizer” Reduction Dies, as you end up having DOUBLE the stability of both the design of the die itself as well as the folding cone when folding over any US Quarter, US Half Dollar, Morgan/Peace Dollar, or the American Silver Eagle!



Here’s why you should buy your tools from the CoinRingUSA® Shop:

1. Each folding cone is made from high quality hardened stainless steel and is CNC-machined.

2. My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

3. The level of quality of my tools is never duplicated elsewhere.

4. The optimal degree of angle is used on these cones for folding your coins.

5. I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.

6. All of my tools are 100% guaranteed

7. Why pay a little less for inferior folding cones? Buy from CoinRingUSA® to get the highest quality tools!



*** IMPORTANT NOTE ***
You don’t need to memorize which particular size folding cone fits into which size center hole in whichever coin you are about to begin folding over. Instead, you want to pick the Folding Cone that fits into your coin’s center hole, that will also fit under the ram head on your Ring Sizing Machine, arbor or hydraulic press.

As you continue to fold your coin down into the reduction die, you simply switch to a SMALLER diameter-sized reduction die and a LARGER-sized cone (and the spacer provided if needed) to finish the coin’s folding-over process.


(Coins pictured are not included and are meant for reference only).



*** SAFETY FIRST ***

--- CAUTION! These cones are small parts and can be considered a choking hazard. Please keep away from children and pets!
--- Always wear safety glasses.
--- Keep fingers, long hair, and loose clothing away from any pinch points or open flame.
--- Make sure to anneal, (heat, then quench) the coin often as you're working it often.



•To view all of my videos on coin ring tips and tricks, subscribe to my YouTube channel by typing “CoinRingUSA” in the YouTube search box, or click here: youtube.com/CoinRingUSA

•To see all of the coin ring-making tools that I have to offer, please visit: CoinRingUSA.com

Thanks, and here's to your coin ring-making success!



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Reviews

5 out of 5 stars
(1,280)

Payments

Secure options
Paypal Visa Mastercard American Express Discover Giftcard
Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
I accept PayPal and all major Credit cards and Debit cards. If you do not have a PayPal account, you can still make your payment through Paypal using your credit or debit card, or; you can pay through Etsy directly for your items.

Major Debit or Credit Cards:

- VISA
- MasterCard
- American Express
- Discover

Returns & exchanges

I gladly accept returns and exchanges

Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery

I don't accept cancellations

But please contact me if you have any problems with your order.

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Returns and exchange details

All items are 100% guaranteed.

Shipping policies

*** NOTE *** Please combine the saved items in your shopping cart BEFORE you check out in order to save on shipping costs.

Processing time may vary between items ordered.

My Shop ships worldwide! If you are ordering from outside of the United States, please be aware that your country may impose a VAT, (Value Added Tax); (also known as a Customs Duty), on the order. You will be asked to pay this additional fee before receiving your parcel. Please research your country's laws and any additional fees that may be placed on the items you'd like to order.

Also be aware that your Customs may delay the package for an unknown period of time. You will need to inquire with your local Post Office or postal service for further delivery information. My Shop is not responsible for customs delays.

Customs forms paperwork will be placed on the package to expedite the process.

Additional policies

Thank you for your business! Reviews of the tools purchased are always appreciated.

If you would like to place a custom order, please select the blue "Request Custom Order" tab on my Shop's Homepage, or send me a message through Etsy with your request.

Slight non-functional variations of things such as color, texture, and engraving on items may occur from time to time.

SAFETY FIRST! Always use safety glasses and keep hair and loose clothing away from pinch points and sources of heat while working.

You may also like

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…