Whoa! You can't buy your own item.

MEDIUM Direct Replacement Brass Pushrod Plunger for Extruding "Swedish-Wrapped" Coin Rings

MEDIUM Direct Replacement Brass Pushrod Plunger for Extruding "Swedish-Wrapped" Coin Rings

Ask a question

$15.95

Please select a quantity

Overview

  • Craft type: Jewelry making, Metalworking
  • Material: Hardened Brass
  • Favorited by: 8 people
  • Gift message available
This shop accepts Etsy gift cards

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted
Exceptions may apply. See return policy

Description

At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.



This MEDIUM double-sided brass pushrod plunger is a direct replacement to your damaged pushrod plunger. This is the THIRD largest pushrod in the complete set. (Please see listing photos for reference to make sure that you are ordering the correct size pushrod that you need).


Irreparable damage occurs when a brass pushrod is pressed too far down the Swedish Wrap Dies and makes contact with the inner die side walls. This can mainly be avoided by using an arbor press over a hydraulic press; as the arbor press provides a nice balance between power and feel.


Each pushrod plunger in the set is double-sided, giving you the most options by offering the most sizes available for extruding con rings than any other pushrod plunger on the market.


The brass used is produced here in the USA and each piece is CNC-machined by skilled machinists to the most exact tolerances and finish-sanded by hand for the best possible quality and results.


*This listing is for ONE brass pushrod plunger and it is not the complete Set



PLEASE KEEP THE FOLLOWING IN MIND WHEN USING THE SWEDISH WRAP METHOD:

1.) Make sure that you firmly press the teflon-wrapped coin ring to make sure that it is seated evenly into the die before compressing with the brass push rod plungers.

2.) Press SLOWLY and make sure that the brass pushrod plunger covers the majority of the reeded portion of the coin. If it doesn’t cover enough of the reeds, the push rod plunger could slip as you are compressing it, possibly ruining the coin ring. You can fix this issue by placing the coin ring, (reeded side DOWN) into either your Universal 17°, 20°, or 25° reduction die to slightly shrink the outer diameter of the reeded side until the brass push rod better covers the reeds.

3.) Make sure that you don't over-press the brass push rod plungers down the Swedish Wrap dies, especially when using a hydraulic press. After some practice, you’ll feel the resistance of when each push rod bottoms out in the dies.



*** Here's why you should purchase your coin ring-making tools from my Shop:

1.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.

2.) The level of quality of my tools is simply not duplicated elsewhere; as I use the highest quality materials that are precision CNC-machined to the finest standards by expert machinists.

3.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

4.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.


5.) All of my coin ring-making tools are 100% guaranteed


6.) Why settle for buying inferior coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality and craftsmanship!



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for various coin ring updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


To see the other coin ring-making tools available; be sure to visit:
CoinRingUSA.com


Thanks, and here's to your coin ring-making success!



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.



This MEDIUM double-sided brass pushrod plunger is a direct replacement to your damaged pushrod plunger. This is the THIRD largest pushrod in the complete set. (Please see listing photos for reference to make sure that you are ordering the correct size pushrod that you need).


Irreparable damage occurs when a brass pushrod is pressed too far down the Swedish Wrap Dies and makes contact with the inner die side walls. This can mainly be avoided by using an arbor press over a hydraulic press; as the arbor press provides a nice balance between power and feel.


Each pushrod plunger in the set is double-sided, giving you the most options by offering the most sizes available for extruding con rings than any other pushrod plunger on the market.


The brass used is produced here in the USA and each piece is CNC-machined by skilled machinists to the most exact tolerances and finish-sanded by hand for the best possible quality and results.


*This listing is for ONE brass pushrod plunger and it is not the complete Set



PLEASE KEEP THE FOLLOWING IN MIND WHEN USING THE SWEDISH WRAP METHOD:

1.) Make sure that you firmly press the teflon-wrapped coin ring to make sure that it is seated evenly into the die before compressing with the brass push rod plungers.

2.) Press SLOWLY and make sure that the brass pushrod plunger covers the majority of the reeded portion of the coin. If it doesn’t cover enough of the reeds, the push rod plunger could slip as you are compressing it, possibly ruining the coin ring. You can fix this issue by placing the coin ring, (reeded side DOWN) into either your Universal 17°, 20°, or 25° reduction die to slightly shrink the outer diameter of the reeded side until the brass push rod better covers the reeds.

3.) Make sure that you don't over-press the brass push rod plungers down the Swedish Wrap dies, especially when using a hydraulic press. After some practice, you’ll feel the resistance of when each push rod bottoms out in the dies.



*** Here's why you should purchase your coin ring-making tools from my Shop:

1.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.

2.) The level of quality of my tools is simply not duplicated elsewhere; as I use the highest quality materials that are precision CNC-machined to the finest standards by expert machinists.

3.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

4.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.


5.) All of my coin ring-making tools are 100% guaranteed


6.) Why settle for buying inferior coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality and craftsmanship!



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for various coin ring updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


To see the other coin ring-making tools available; be sure to visit:
CoinRingUSA.com


Thanks, and here's to your coin ring-making success!



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Reviews

5 out of 5 stars
(1,269)

Payments

Secure options
  • Visa
  • Mastercard
  • American Express
  • Discover
  • Paypal
  • GiftcardAccepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
I accept PayPal and all major Credit cards and Debit cards. If you do not have a PayPal account, you can still make your payment through Paypal using your credit or debit card, or; you can pay through Etsy directly for your items.

Major Debit or Credit Cards:

- VISA
- MasterCard
- American Express
- Discover

Returns & exchanges

I gladly accept returns and exchanges

Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery

I don't accept cancellations

But please contact me if you have any problems with your order.

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Returns and exchange details

All items are 100% guaranteed.

Shipping policies

*** NOTE *** Please combine the saved items in your shopping cart BEFORE you check out in order to save on shipping costs.

Processing time may vary between items ordered.

My Shop ships worldwide! If you are ordering from outside of the United States, please be aware that your country may impose a VAT, (Value Added Tax); (also known as a Customs Duty), on the order. You will be asked to pay this additional fee before receiving your parcel. Please research your country's laws and any additional fees that may be placed on the items you'd like to order.

Also be aware that your Customs may delay the package for an unknown period of time. You will need to inquire with your local Post Office or postal service for further delivery information. My Shop is not responsible for customs delays.

Customs forms paperwork will be placed on the package to expedite the process.

Additional policies

Thank you for your business! Reviews of the tools purchased are always appreciated.

If you would like to place a custom order, please select the blue "Request Custom Order" tab on my Shop's Homepage, or send me a message through Etsy with your request.

Slight non-functional variations of things such as color, texture, and engraving on items may occur from time to time.

SAFETY FIRST! Always use safety glasses and keep hair and loose clothing away from pinch points and sources of heat while working.

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…