This decal is for one Poodle with a red heart in the middle. Place on your car, laptop or yeti cup. Pick your color and the font you would like.
Pick your color and your font. When you check out you can put your letters or name in the "note to seller".
Thanks for visiting and come again!
.
INSTRUCTIONS
IRON ON VINYL
With a hot iron (mine is a little down from cotton so not the max hottest setting) Iron through the plastic. Hold for a few seconds still and then wiggle and then move positions until you’ve hit all the vinyl. Gently pull on an edge and if the vinyl comes up with it, iron some more. This step takes the longest especially if you have a large image.
Next, I like to flip it over and iron a little from the back. Once you are sure the vinyl is securely attached, pull away the plastic. Feel around the vinyl especially at the edges to see if there are any spots that need reinforcement.
**MAKE SURE TO WAIT 24 HOURS BEFORE FIRST WASH**
VINYL/GLITTER DECALS
Press firmly on the transfer tape. Peel the transfer tape back at a sharp angle. At this point, the vinyl should be attached to the transfer tape. If not, please repeat this step. Place the decal on your cup/project and swipe firmly over the transfer tape with a credit card. The decal should be sticking to your cup/project. You may have to work back and forth a couple of times. Be careful when you pull the transfer tape off the vinyl so you do not tear the decal.
*****REMINDER: If you place vinyl on a cup or glass, please hand wash. Please do not place in a dishwasher or submerge in water. ************
If you are purchasing a decal only, tracking is not included. You would have to upgrade shipping. It is not included in free shipping.