Orb Fire Poi - 2Poi or 3 Poi - Message us for discount

Orb 3.0 Contact fire poi with full Technora tethers and a variety of knob and hardware attachment options.

If you want to match your fire poi set to match your contact practice set, we recommend 1 size down in diameter.

Only available in #3 connection point:
- Static Technora Tethers - 8mm - 10mm - 11mm - 12mm in gold
- Hybrid Technora in Gold: 10mm and 12mm

Standard setup Includes:
- Knob (See below for description and photos above)
- Technora Tethers (See images for options)
- Orb Heads
- 80mm (155g unsoaked)~ 3 inch ~6 minute burn time (New Design, full kevlar core with 3 bight weave. Image has not been updated)
- 90mm (190g unsoaked) ~3.5 inch ~7 minute burn time
- 95mm (210g unsoaked) ~ 3.75inch ~8 minute burn time

Tether Options:
- Technora
- Relaxed (has a core) (8mm - 10mm - 12.5mm)
- Hybrid (10mm - 12.5mm)
- Static (8mm - 10mm - 10.5mm - 11mm - 12mm)
- Kevlar
- Static (10.5mm)

Static Technora is stiffer than static kevlar. Static kevlar is lighter in weight. Hybrid and Static tethers are only available in conection #3 (in-set).

Hardware Options:
- #1 Direct-Connect: Technora is spliced directly to the eyelet on the outside of the wick.
- #2 Quick-link: Technora is spliced directly to the quick-link and the quick-link is attached to the eyelet. The quick-link can be unscrewed to remove the tether.
- #3 Inset: Tether ia anchored to the bottom of the core, inside the wick. These tethers are not replaceable. Avoid getting fuel on the tether: submerge the bottom 7/8 of the wick and allow the dry kevlar to wick fuel upwards

✦ Please provide your overall length... this is the entire poi tip-to-tip (including the knobs and balls). We recommend measuring from center of palm to arm pit and then adding 1 inch to that measurement. If you don't provide a length they will be set to 24 inches.

✦ Knob and Rope Information:

Swivels are $20 per poi… Swivels spin the fastest for the “Orbital Trick”
⤷ You have to pay for them separate with this upgrade link here: https://etsy.me/2OPrGZA
⤷ In-line swivels: There is 2.5" of rope separating the swivel from knob.
⤷ In-set swivels: Swivel is inset into knob (tends to pinch your finger depending upon your grip-style; if you hold the rope when spinning these will work for you)
⤷ Bill Fisher KROK #7 dual rotation swivels
⤷ We either splice the cord up through itself to create a single strand or on thicker tethers we use heat-shrink tube.

Bearings are $20-$40 per poi - spin slower than swivels and requires technique adjustment to sustain the Orbital.
⤷ You have to pay for them separate with this upgrade link here: https://etsy.me/2OPrGZA
⤷ Can only be used on these practice knobs: TorQ-Zorb, TorQ, Tex-TorQ, Tex-Flex XL, Flex XL, TexFlex, PomGrip and Soft Px3

✦ Knob Details:

*1 single washer adds 4.5 grams of extra weight. For most knobs we recommend 2 washers. Heavier knobs = faster rotating toss.

—>TorQ-Zorb
- Weight: 17 grams
- Height: 22mm // Width: 37.5mm
- Soft grippy (not sticky) silicone - Designed by FoF
- Can have up to 8 washers

—> Sphere knobs
- Weight = 30g
- Diameter: 37mm
- Firm rubber - silicone - Designed by FoF
- Grippy but not sticky
- 41 colors
- Can have up to 8 washers

—> TorQ
- White, Black, #8, #10 #14, #16, #18, #25 are squishier than the other colors
- Weight: 7 grams
- Height: 22mm // Width: 37.5mm
- 3D Printed in Maine - designed by FoF
- Can have up to 8 washers

—> Tex-TorQ
- White, Black, #8, #10 #14, #16, #18, #25 are squishier than the other colors
- Weight: 7 grams
- Height: 22mm // Width: 37.5mm
- 3D Printed in Maine - designed by FoF
- Has a textured finish
- Can have up to 8 washers.

—> Tex-Flex:
- 7 grams
- 34mm Diameter x 23mm Tall
- 3D Printed in Maine - designed by FoF
- Has a textured finish
- Can have up to 7 washers

—>Flex XL:
- 10 grams
- 42mm Diameter x 28mm Tall
- 3D Printed in Maine - designed by FoF
- Can have up to 9 washers

—> Tex-Flex XL
- 10 grams
- 42mm Diameter x 28mm Tall
- 3D Printed in Maine - designed by FoF
- Has a textured finish
- Can have up to 9 washers

—> PomGrip 2.0
- Weight: 12.5g
- Diameter: 35mm // Height: 25mm
- Half sphere shape. Squishy
- Grippy like toothbrush grip material
- Can have up to 4 washers

—> Ovo Knob
- 30g
- Diameter: 35mm // Height: 48mm
- Grippy like toothbrush grip material
- Can have up to 8 washers

—> Delphin Knob
- Weight: 5 grams
- Diameter: 34mm // Height: 23mm
- Comparable in size to Flex standard knob
- Firm foam-like material - Not slippery when wet
- Can have up to 3 washers

—> Px3 Knob (soft)
- Weight: 10g
- Diameter: 33mm // Height: 22mm
- Small grip
- Thermoplastic Rubber, *Pastels are hard
- Can have up to 3 washers

✦ LED Knob Series:

—> LED Luna
- Soft grippy
- 26 grams
- Height: 30mm // Width: 36mm at widest and 25mm wide at base
- Uses rechargeable DOT XL Pro chips by UltraPoi
- Designed by FoF
- Cannot have washers


—> LED TorQ-Zorb (frosted)
- Soft grippy (not sticky) 

- Uses rechargeable DOT XL Pro chips by UltraPoi
- Designed by FoF

- Weight with chip and crimp: 27 grams

- Height: 22mm // Width: 37.5mm

- Cannot have washers

—> LED Sphere Knob *NEW BRIGHTER DESIGN*

- Rubber

- Diameter: 39mm

- Weight with chip & crimp: 37 grams 

- Cannot have washers

—> LED TorQ & LED Tex-TorQ

- Uses rechargeable DOT XL Pro chips by UltraPoi

- 3D Printed in Maine, designed by FoF

- Weight with chip and crimp: 16 grams

- Height: 22mm // Width: 37.5mm 

- Cannot have washers

—> LED Flex XL & Tex-Flex XL 

- Uses rechargeable DOT XL Pro chips by UltraPoi

- 3D Printed in Maine, designed by FoF

- Diameter: 42mm // 29mm Tall

- Weight (with chip and crimp: 18 grams

- Can have 1 washer = 22.5 grams 

- The Tex has a textured gritty-grippy finish. 

—> LED UltraKnob Pro

- Weight: 26g

- Diameter: 38mm // Height: 28mm

- Rope attaches directly to LED insert within the knob

- Uses Dot XL Pro (mini usb charger not included)
- Warrantied by UltraPoi directly

- Cannot have washers

—> ErgoLITE and ErgoLITE Tex Knobs (Bearing Knobs)
- Weight: 30 grams
- Height: 43mm
- Width at thickest: 39mm
- Width at base: 27.5mm
- 3D Printed
- Squishy outer texture with firmer core
- Brighter illumination than other 3D printed bearing knobs we’ve sold in the past
- *Tex = grippy textured finish