A custom homemade tap handle made from your choice of hardwood. Each handle has an inset wooden board onto which your custom graphic is engraved and painted. This tap handle is 3.25 inches tall and 2.6 inches wide and approximately .8 inches thick. There are several possible graphic designs to choose from (see 4th picture), or you can contact me through Etsy Conversations if you have a different graphic in mind. There is typically no additional charge for a custom graphic. You may add two lines of text with up to 20 letters each both above and below the graphic, and an "Established" date as well (if desired).

The hardwoods available are shown in the 1st 3 pictures. This handle is single-sided; the back side will look as shown in the 3rd picture.

This tap handle is coated in polyurethane for long life. There is a threaded insert in the base to screw into a North American standard 3/8"-16UNC threaded tap.

Please list what you would like for the UPPER TEXT and the LOWER TEXT (each maximum 20 letters, spaces included) in the box above before adding the item to your cart. Also specify which graphic and established date you would like. Prior to engraving, I will send a digital mockup through Etsy Conversations to verify that the design is correct.

Please contact me through Etsy Conversations if you have any questions or would like a different graphic than what is shown. Custom graphics and text may not be trademarked or copyrighted.

For a similar handle with full color graphics, see https://www.etsy.com/listing/748399179.