Whoa! You can't buy your own item.

Rock Clamp Medium size clamp for slab saws 12" to 24" - Holds end cuts or hard to hold rocks, geodes, etc..

Like this item?

Add it to your favorites to revisit it later.

Favorite

Request a custom order and have something made just for you.

Description

I designed and have been making these for over 23 years. They are designed to hold that end cut piece of rock that just wont clamp into your vice securely after you have cut as many cuts as you can. With this rock clamp you ca finish cutting the rock and get every possible slab form that rock instead of breaking it up for the tumbler or throwing it in the pile of end cuts.

This Rock Clamp can hold a piece 3/4 x 3/4 inches up to 8 x 8" and several pounds. It fits all 12" to 24" new slab saw's such as Highland Park, Covington, Barranca, Diamond pacific, Lortone and most older saw's like Royals, Fran Tom, Great western, Star diamond, Rock's, Beacon star, Ideal - Mojave saw's and numerous home made saw's with vices. I even use it with my masonry and tile saws to cut geodes at rock shows and for masonry work.

This is a far better way of holding an end cut than gluing it to a board or waiting hours to cut it in a concrete casting ( plus less messy ). This clamp can also be used to cut perfect preforms for spheres, cut round rocks that are hard to hold in your saw's vice. It is also perfect for cutting that special rock with the pattern you want to follow but you can't clamp in your saws vice with out it slipping out, with this rock clamp you can place the rock in any position and make your initial cut and then reposition the rock in the clamp and cut the rock along the pattern you want to follow getting every possible slab you can from the rock you are cutting.

It is also great for cutting geodes perfectly with out having to block them up to cut them you can easily clamp them in this rock clamp and cut one after another perfectly in half each time.

I designed this clamp because I lost 2 blades years ago when a rock i was cutting that I had glued to the of a 4 x 4 came loose and ruined my blade ( i had glued rocks to 2x4 and 4x4 for years prior). I damaged a 2nd blade when I was using an aluminum rock clamp and the rock slipped out of it and damaged the blade

This Rock Clamp is made of heavy duty Steal and I make each one personally and have full control over the quality. I Guarantee them for 1 year and replacement clamping screws can be purchased through me or better yet at any hardware store.

I also make a smaller rock clamp to be used with smaller 10 to 12" slab and trim saws to be used on very small pieces ( 1/4 " to 3" ) in size

I have been in the Lapidary ( rock cutting, polishing, collecting and selling ) for over 45 years and am now doing it full time. I sell every year at Desert Gardens in Quartzite az. ( years ago at Clouds and Tyson Wells )

Please feel free contact me if you have any questions

The international shipping price is high because the price can vary a lot so please contact me before buying for a shipping quote.

NOTE: The price is for only one clamp, the others in the pictures are not included in the price.

Thank You John Scofield
I designed and have been making these for over 23 years. They are designed to hold that end cut piece of rock that just wont clamp into your vice securely after you have cut as many cuts as you can. With this rock clamp you ca finish cutting the rock and get every possible slab form that rock instead of breaking it up for the tumbler or throwing it in the pile of end cuts.

This Rock Clamp can hold a piece 3/4 x 3/4 inches up to 8 x 8" and several pounds. It fits all 12" to 24" new slab saw's such as Highland Park, Covington, Barranca, Diamond pacific, Lortone and most older saw's like Royals, Fran Tom, Great western, Star diamond, Rock's, Beacon star, Ideal - Mojave saw's and numerous home made saw's with vices. I even use it with my masonry and tile saws to cut geodes at rock shows and for masonry work.

This is a far better way of holding an end cut than gluing it to a board or waiting hours to cut it in a concrete casting ( plus less messy ). This clamp can also be used to cut perfect preforms for spheres, cut round rocks that are hard to hold in your saw's vice. It is also perfect for cutting that special rock with the pattern you want to follow but you can't clamp in your saws vice with out it slipping out, with this rock clamp you can place the rock in any position and make your initial cut and then reposition the rock in the clamp and cut the rock along the pattern you want to follow getting every possible slab you can from the rock you are cutting.

It is also great for cutting geodes perfectly with out having to block them up to cut them you can easily clamp them in this rock clamp and cut one after another perfectly in half each time.

I designed this clamp because I lost 2 blades years ago when a rock i was cutting that I had glued to the of a 4 x 4 came loose and ruined my blade ( i had glued rocks to 2x4 and 4x4 for years prior). I damaged a 2nd blade when I was using an aluminum rock clamp and the rock slipped out of it and damaged the blade

This Rock Clamp is made of heavy duty Steal and I make each one personally and have full control over the quality. I Guarantee them for 1 year and replacement clamping screws can be purchased through me or better yet at any hardware store.

I also make a smaller rock clamp to be used with smaller 10 to 12" slab and trim saws to be used on very small pieces ( 1/4 " to 3" ) in size

I have been in the Lapidary ( rock cutting, polishing, collecting and selling ) for over 45 years and am now doing it full time. I sell every year at Desert Gardens in Quartzite az. ( years ago at Clouds and Tyson Wells )

Please feel free contact me if you have any questions

The international shipping price is high because the price can vary a lot so please contact me before buying for a shipping quote.

NOTE: The price is for only one clamp, the others in the pictures are not included in the price.

Thank You John Scofield

Reviews

5 out of 5 stars
(140)

Payments

Secure options
  • Visa
  • Mastercard
  • American Express
  • Discover
  • Paypal
  • GiftcardAccepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
I accept credit cards through etsy and i take pay pal.

I accept checks and money orders , a waiting period might be needed depending on the financial institution the funds are coming from or how much business we have done together

I accept Etsy gift cards

I also except cash but i don't recommend it, but if you want to use it, please conceal it well.

You can also arrange to pick up your item if are near or are coming to the area

Returns & exchanges

I will refund moneys only if i have misrepresented the item sold, if you would like a refund please contact me first before you return the item.

Shipping policies

I usually ship with in 1to 3 business days using the least expensive carrier: U.S. post office, fedex, ups or DHL.

If you want tracking, delivery confirmation or would like your item shipped quicker than the normal services offer, like overnight, next day, etc..., then let me know as that will change the shipping costs

Rock Clamp Medium size clamp for slab saws 12" to 24" - Holds end cuts or hard to hold rocks, geodes, etc..

Ask a question

$75.00

Please select a quantity

Overview

  • Handmade Supply
  • Craft type: Jewelry making
  • Materials: steel, iron, metal, welded
  • Favorited by: 4 people
  • Gift message available
This shop accepts Etsy gift cards

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From Riverside, CA

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…