ONE Swedish Wrap Die... "you-select-the-size" option

CoinRingUSA

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

ONE Swedish Wrap Die... "you-select-the-size" option

Message Seller

$57.95

Please select an option
Almost gone. There's only 1 left.

Item details

Material

Hardened Stainless Steel

Now you can purchase a single Swedish Wrap die, as either a replacement or to build out your own custom set.


* There are 4 Swedish Wrap dies to choose from:

1.) The LARGE Swedish Wrap die (marked 1.4” at the opening end) can begin to reduce the larger-sized coins such as Challenge Coins, the American Silver Eagle, and the Morgan Dollar after they’ve been fully folded over.

2.) The MEDIUM Swedish Wrap die (marked 1.2” at the opening end) can further reduce Challenge Coins, American Silver Eagles, and Morgan Dollar-sized coins roughly down to a size 9 while only BOTTOMING the coins in this die.

3.) The SMALL Swedish Wrap die (marked 1.1” at the opening end) can be used to compress Half Dollar-sized coins down to roughly a size 3.5 with full extrusion, and can also be used to further compress the larger-sized coins such as the American Silver Eagle, Morgan/Peace Dollars, Challenge Coins, etc., down to a tiny size 1 when fully extruding out through the bottom of the die.

4.) The new TINY Swedish Wrap die (marked 0.9” at the opening end) can be used to reduce any fully folded-over US quarter, nickel, penny, and dime-sized coins. This Swedish Wrap die has the SMALLEST inner diameter exit opening on the market for coins to pass through, allowing you even to make the smallest “bead-sized” coin rings!
A general rule of thumb that works well is to reduce your coin ring down to 2 or 3 sizes ABOVE your final target ring size. Once you reach that point, you can then use one of the Universal 17° dies that fits the coin to reduce it to its’ final shape and size. You can also “tuck in” the edges of the coin ring using the 25° “Fat Tire” Die for a more rounded-look while bringing those larger coin rings down to a size 0 – 0000.



This new technique has revolutionized the way that larger coins are made into smaller-sized coin rings; all the while protecting the full detail of each coin.

These Swedish Wrap dies are also great to use to remove the "wobble" that can occur when making coin rings.


NOTE: This listing is for ONE Swedish Wrap die only... it does NOT come with any brass push rod plungers. Make sure that you select the proper size that you need, and add all of the items together in your shopping cart before you check out to save on shipping.



--- Below are some reviews and emails that I have received from folks regarding the Swedish Wrap dies:


* "Great set of dies. Silky smooth and work beautifully, can't see how they could be any better. Great addition to my tools. Thanks much Martin!"
butch0011 on May 20, 2017
5 out of 5 stars


* "Excellent quality! As I've said before I wouldn't buy these tools from anyone else in the future."
Davostrange on May 4, 2017
5 out of 5 stars


* "A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars


* "This is the coolest thing I've ever worked with. Super easy and amazing results. Thank you Martin for the superior tools and all the help. If you are serious about making coin rings, the swedish dies are a must!"
gsmcgee12 on Nov 16, 2016
5 out of 5 stars


* Love these dies. Butter smooth. Like having three shallow dies because I can see in them and not have to worry about any issues. All of my dies are from Martins shop. He makes top quality tools! Thanks Martin"
B Conn on Oct 5, 2016
5 out of 5 stars


* "Hickory Dickory Dock, This Etsy Seller Rocks... Great Tools!!!!! Thanks For The Bonus It Works Great!!!!"
undertowproducts on Aug 17, 2016
5 out of 5 stars



*** SWEDISH WRAP METHOD STEPS: ***

After folding your coin ring (using the regular Universal Folding/Reduction dies), find the correct diameter brass push rod that covers the majority of the reeded-end of your coin. After annealing and wrapping the coin in Teflon thread tape, you place your folded-over coin ring into the appropriate sized die that it fits in, with the reeded edge facing UP, towards you.


Begin to compress (extrude) the coin down the die, pulling the coin out often to both re-anneal and to re-wrap the coin in pipe thread tape, and when necessary; flipping the brass push rod over to the next smaller diameter size to continue compressing the coin down the die. Continue to compress the coin ring further down the Swedish Wrap dies until you reach the size needed for further reduction.



PLEASE KEEP THE FOLLOWING IN MIND WHEN USING THIS TECHNIQUE:

1.) TAKE YOUR TIME, especially when first starting out. I recommend Swedish Wrapping' a few rings out of clad coins to get familiar with the process.

2.) Make sure that you anneal your coin OFTEN, ideally after every press or two. Doing so will make the process easier.

3.) Use a LOT of pipe thread tape, and make sure to both re-anneal and re-wrap your coin ring often throughout the process. A 10-pack of the pipe thread tape can be purchased at HarborFreight.com for 2 dollars.

4.) Make sure that you firmly press the teflon-wrapped coin ring to make sure that it is seated evenly into the Swedish Wrap die before compressing with the brass push rod plungers.

5.) Press SLOW and make sure that the brass push rod covers the majority of the reeded portion of the coin. If it doesn’t cover enough of the reeds, the push rod could slip as you’re compressing it, possibly ruining the coin ring. You can fix this issue by placing the coin ring, (reeded side DOWN) into either your Universal 17°, or 25° "fat tire" folding and reduction die to slightly shrink the outer diameter of the reeded side until the brass push rod better covers the reeds. * Be sure not to reduce TOO MUCH here, do just enough so that there's more coverage needed for the brass push rod.

6.) Make sure that you don't over press the brass push rods down the Swedish Wrap dies, especially when using a hydraulic press or an arbor press. At first, it's best to place the brass push rods into the dies WITHOUT the coin ring underneath. That way, you can get an idea of where the push rod "bottoms out" before actually compressing your coin. After some practice, you’ll be able to feel the resistance of when each push rod bottoms out in the dies.



The tiny-sized coin rings can be incorporated into charms on necklaces, bracelet charms, or even earrings. The possibilities are many!

*** Brass pushrod plungers are NOT included in this listing. Coins and coin rings pictured are not included and are used for reference only.



At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of Swedish Wrap Method extrusion dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective reduction and extrusion of any coin to make into a coin ring on the market.


*** Here's why you should purchase your coin ring-making tools from the CoinRingUSA® Shop:


1.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.

2.) The level of quality of my tools is simply not duplicated elsewhere; as I use the highest quality Hardened Stainless Steel that is precision CNC-machined to the finest standards by expert machinists and hand polished to a smooth finish; unlike most other competitors' dies that have rough finishes to the inner die faces.

3.) Each die has also been precision engraved with the corresponding size opening for easy identification.

4.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

5.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.


6.) All of my coin ring-making tools are 100% guaranteed


7.) Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


To see the other coin ring-making tools available; be sure to visit: CoinRingUSA.com


Thanks, and here's to your coin ring-making success!



*** Shipping:

This set will be shipped by USPS Priority Mail with Signature Confirmation for U.S. residents.

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
Now you can purchase a single Swedish Wrap die, as either a replacement or to build out your own custom set.


* There are 4 Swedish Wrap dies to choose from:

1.) The LARGE Swedish Wrap die (marked 1.4” at the opening end) can begin to reduce the larger-sized coins such as Challenge Coins, the American Silver Eagle, and the Morgan Dollar after they’ve been fully folded over.

2.) The MEDIUM Swedish Wrap die (marked 1.2” at the opening end) can further reduce Challenge Coins, American Silver Eagles, and Morgan Dollar-sized coins roughly down to a size 9 while only BOTTOMING the coins in this die.

3.) The SMALL Swedish Wrap die (marked 1.1” at the opening end) can be used to compress Half Dollar-sized coins down to roughly a size 3.5 with full extrusion, and can also be used to further compress the larger-sized coins such as the American Silver Eagle, Morgan/Peace Dollars, Challenge Coins, etc., down to a tiny size 1 when fully extruding out through the bottom of the die.

4.) The new TINY Swedish Wrap die (marked 0.9” at the opening end) can be used to reduce any fully folded-over US quarter, nickel, penny, and dime-sized coins. This Swedish Wrap die has the SMALLEST inner diameter exit opening on the market for coins to pass through, allowing you even to make the smallest “bead-sized” coin rings!
A general rule of thumb that works well is to reduce your coin ring down to 2 or 3 sizes ABOVE your final target ring size. Once you reach that point, you can then use one of the Universal 17° dies that fits the coin to reduce it to its’ final shape and size. You can also “tuck in” the edges of the coin ring using the 25° “Fat Tire” Die for a more rounded-look while bringing those larger coin rings down to a size 0 – 0000.



This new technique has revolutionized the way that larger coins are made into smaller-sized coin rings; all the while protecting the full detail of each coin.

These Swedish Wrap dies are also great to use to remove the "wobble" that can occur when making coin rings.


NOTE: This listing is for ONE Swedish Wrap die only... it does NOT come with any brass push rod plungers. Make sure that you select the proper size that you need, and add all of the items together in your shopping cart before you check out to save on shipping.



--- Below are some reviews and emails that I have received from folks regarding the Swedish Wrap dies:


* "Great set of dies. Silky smooth and work beautifully, can't see how they could be any better. Great addition to my tools. Thanks much Martin!"
butch0011 on May 20, 2017
5 out of 5 stars


* "Excellent quality! As I've said before I wouldn't buy these tools from anyone else in the future."
Davostrange on May 4, 2017
5 out of 5 stars


* "A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars


* "This is the coolest thing I've ever worked with. Super easy and amazing results. Thank you Martin for the superior tools and all the help. If you are serious about making coin rings, the swedish dies are a must!"
gsmcgee12 on Nov 16, 2016
5 out of 5 stars


* Love these dies. Butter smooth. Like having three shallow dies because I can see in them and not have to worry about any issues. All of my dies are from Martins shop. He makes top quality tools! Thanks Martin"
B Conn on Oct 5, 2016
5 out of 5 stars


* "Hickory Dickory Dock, This Etsy Seller Rocks... Great Tools!!!!! Thanks For The Bonus It Works Great!!!!"
undertowproducts on Aug 17, 2016
5 out of 5 stars



*** SWEDISH WRAP METHOD STEPS: ***

After folding your coin ring (using the regular Universal Folding/Reduction dies), find the correct diameter brass push rod that covers the majority of the reeded-end of your coin. After annealing and wrapping the coin in Teflon thread tape, you place your folded-over coin ring into the appropriate sized die that it fits in, with the reeded edge facing UP, towards you.


Begin to compress (extrude) the coin down the die, pulling the coin out often to both re-anneal and to re-wrap the coin in pipe thread tape, and when necessary; flipping the brass push rod over to the next smaller diameter size to continue compressing the coin down the die. Continue to compress the coin ring further down the Swedish Wrap dies until you reach the size needed for further reduction.



PLEASE KEEP THE FOLLOWING IN MIND WHEN USING THIS TECHNIQUE:

1.) TAKE YOUR TIME, especially when first starting out. I recommend Swedish Wrapping' a few rings out of clad coins to get familiar with the process.

2.) Make sure that you anneal your coin OFTEN, ideally after every press or two. Doing so will make the process easier.

3.) Use a LOT of pipe thread tape, and make sure to both re-anneal and re-wrap your coin ring often throughout the process. A 10-pack of the pipe thread tape can be purchased at HarborFreight.com for 2 dollars.

4.) Make sure that you firmly press the teflon-wrapped coin ring to make sure that it is seated evenly into the Swedish Wrap die before compressing with the brass push rod plungers.

5.) Press SLOW and make sure that the brass push rod covers the majority of the reeded portion of the coin. If it doesn’t cover enough of the reeds, the push rod could slip as you’re compressing it, possibly ruining the coin ring. You can fix this issue by placing the coin ring, (reeded side DOWN) into either your Universal 17°, or 25° "fat tire" folding and reduction die to slightly shrink the outer diameter of the reeded side until the brass push rod better covers the reeds. * Be sure not to reduce TOO MUCH here, do just enough so that there's more coverage needed for the brass push rod.

6.) Make sure that you don't over press the brass push rods down the Swedish Wrap dies, especially when using a hydraulic press or an arbor press. At first, it's best to place the brass push rods into the dies WITHOUT the coin ring underneath. That way, you can get an idea of where the push rod "bottoms out" before actually compressing your coin. After some practice, you’ll be able to feel the resistance of when each push rod bottoms out in the dies.



The tiny-sized coin rings can be incorporated into charms on necklaces, bracelet charms, or even earrings. The possibilities are many!

*** Brass pushrod plungers are NOT included in this listing. Coins and coin rings pictured are not included and are used for reference only.



At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of Swedish Wrap Method extrusion dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective reduction and extrusion of any coin to make into a coin ring on the market.


*** Here's why you should purchase your coin ring-making tools from the CoinRingUSA® Shop:


1.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.

2.) The level of quality of my tools is simply not duplicated elsewhere; as I use the highest quality Hardened Stainless Steel that is precision CNC-machined to the finest standards by expert machinists and hand polished to a smooth finish; unlike most other competitors' dies that have rough finishes to the inner die faces.

3.) Each die has also been precision engraved with the corresponding size opening for easy identification.

4.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

5.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.


6.) All of my coin ring-making tools are 100% guaranteed


7.) Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


To see the other coin ring-making tools available; be sure to visit: CoinRingUSA.com


Thanks, and here's to your coin ring-making success!



*** Shipping:

This set will be shipped by USPS Priority Mail with Signature Confirmation for U.S. residents.

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted
See return policy

Reviews

5 out of 5 stars (1,370)

Returns & exchanges

I gladly accept returns and exchanges

Contact me within: 7 days of delivery
Ship items back within: 14 days of delivery

I don't accept cancellations

But please contact me if you have any problems with your order.

Returns and exchange details

Returned items must be in their new condition. Buyer pays for return shipping, and a 10% restocking fee will apply.

Shipping policies

*** NOTE *** Please combine the saved items in your shopping cart BEFORE you check out in order to save on shipping costs.

Processing time may vary between items ordered.

My Shop ships worldwide! If you are ordering from outside of the United States, please be aware that your country may impose a VAT, (Value Added Tax); (also known as a Customs Duty), on the order. You will be asked to pay this additional fee before receiving your parcel. Please research your country's laws and any additional fees that may be placed on the items you'd like to order.

Also be aware that your Customs may delay the package for an unknown period of time. You will need to inquire with your local Post Office or postal service for further delivery information. My Shop is not responsible for customs delays.

Customs forms paperwork will be placed on the package to expedite the process.

Payments

Secure options
Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
I accept PayPal and all major Credit cards and Debit cards. If you do not have a PayPal account, you can still make your payment through Paypal using your credit or debit card, or; you can pay through Etsy directly for your items.

Major Debit or Credit Cards:

- VISA
- MasterCard
- American Express
- Discover

Additional policies

Thank you for your business! Reviews of the tools purchased are always appreciated.

If you would like to place a custom order, please select the blue "Request Custom Order" tab on my Shop's Homepage, or send me a message through Etsy with your request.

Slight non-functional variations of things such as color, texture, and engraving on items may occur from time to time.

SAFETY FIRST! Always use safety glasses and keep hair and loose clothing away from pinch points and sources of heat while working.

You may also like