Silicone 3D-molds for the shape of the ball (7,8,10,12,15,18,20,22,25,27,30,40mm). Molds for epoxy resin.

Silicone 3D-molds for the shape of the ball (7,8,10,12,15,18,20,22,25,27,30,40mm). Molds for epoxy resin.

$2.04+ $4.09+

You save $2.05 (50%)

Please select an option
Please select an option
Please select a quantity
Other people want this. 3 people have this in their carts right now.

Item details

Handmade

Material

Silicone

More molds of spheres and cubes here: https://www.etsy.com/shop/WorldSiliconeMolds?ref=seller-platform-mcnav§ion_id=22119752

Silicone shape for the ball.
Choose, please, one of the sizes or a set of 12 molds.
!!!!Also you can choose a truncated ball or without truncation!!!!

Finished product dimensions:
7 mm = 0.2775 "
8 mm = 0.315 "
10 mm = 0.3937 "
12 mm = 0.4724 "
15 mm = 0.6299 "
18 mm = 0.8268 "
20 mm = 0.7874 "
22 mm = 0.8661 "
25 mm = 0.9483 "
27 mm = 1.063 "
30 mm = 1,183 "
40 mm = 1.5748 "
-------------------------------------------------------------------------------------------------

The color of silicone may differ from the photo, but it will not affect the quality of molds!

------------------------------------------------------------------------------------------------

Sending the package within 5-7 working days after payment!

-------------------------------------------------------------------------------------------------
The molds are made of strong and elastic silicone, designed for making any complex shapes from gypsum, wax, soap, epoxy, etc. Also suitable for polymer clay because of the optimum stiffness and heat resistance (short-term withstand temperature of 290 ° C(554°F ), Up to 200 ° C (392°F ) for a long time).
Recommendations for the use of molds:

- Shortly before working, the mold should be washed with water, after which it should be dried on a napkin.
- It is necessary to work very carefully with silicone molds, do not use sharp tools when working with molds.
- Epoxy resin should be poured into the mold by layers, allowing the air bubbles to completely exit. To speed up the bubbling and curing time of the resin, the molds can be slightly heated (carefully, do not overheat! The resin can boil !!!). Silicone is afraid of active chemistry, after 10-20 fillings with epoxy resin, the mold can become brittle. The service life of molds depends on the quality of the jewelry resin and can be up to 20-30 fillings
- It will also be very difficult to clean the mold after unsuccessful filling (if the resin does not harden).
- It is recommended to bake complex cameos and flowers together with mold and take them out only after full cooling.
-To drink the finished product from the mold very carefully, first slightly bending the mold from the edges to release the product, then lightly pressing on the center of the mold, pull out the edges and remove the product. To facilitate the extraction of the finished product from a complex deep mold, we recommend that it be removed under running water with soap.
- FORMS DO NOT ACCEPT FOOD PRODUCTS!

Shipping & returns

Ready to ship in 3–5 business days
From Ukraine
No returns or exchanges
But please contact me if you have any problems with your order.

Meet WorldSiliconeMolds

Natali Onischenko

Natali Onischenko

Kyiv, Ukraine

This seller usually responds within a few hours.

Reviews

4.5 out of 5 stars (380)