Whoa! You can't buy your own item.

Jango Fett Style Mandalorian Helmet (The Drop Bear) - built-in 2 speed cooling - Armor Full Adult Size

Request a custom order and have something made just for you.

This seller usually responds within 24 hours.

Jango Fett Style Mandalorian Helmet (The Drop Bear) - built-in 2 speed cooling - Armor Full Adult Size

Ask a question

$125.00+

Please select a size
Please select a finish
Please select a quantity
Other people want this. 7 people have this in their carts right now.

Overview

  • Handmade item
  • Material: ABS Plastic
  • Made to order
  • Favorited by: 455 people
  • Gift message available
This shop accepts Etsy gift cards

Shipping & returns

Ready to ship in 3–4 weeks
From Australia
Shipping upgrades available in the cart
Returns and exchanges accepted
Exceptions may apply. See return policy

Description

This is a fully 3d printed super strong ABS Mandalorian Helmet code name: "The Drop Bear" It has some distinct advantages over resin helmets.

It comes with built in cooling ducts (optionally fitted with 2 speed USB Powered ducted fans that sit in purpose design holders in the cheeks of the helmet, they have covers so your hair will not get caught in the fan and extract air from the outside of the helmet and blow it out over the visor area, this will mean you remain cooler longer and your visor should not fog up.

Provison for two rocker switches that can be accessed easily while wearing the helmet. If you choose an option with fans, one will be occupied with a 3 position switch for the fans. The other is spare and can be used for future upgrades (for example voice amp or RF motor)

You will get:

Helmet - Medium Large sized helmet (boba sized)
Range Finder Earcaps or DeathWatch Style Earcaps
Electronic Visor template (you will need to ask me for this to email to you)
Fan duct covers
Screws to help put it together if you selected a kit option
Assemble Instructions and Finishing tutorial (online video)
If you select the Fan option you will also get: Fans, wires, 3 position switch and USB power cable

It will take approximately 3 weeks from order to ship this helmet as they are made on demand, I usually have stock but it can be dependent on the options you have picked. Sanding and Undercoating can take an additional week as we need to leave time for multiple coats to dry before shipping.

Jango Fett styled Range Finder and stalk or "deathwatch style left and right earcaps with no RF (please state which you want, the detault is the Jango style RF

The earcaps are separate pieces that need to be glued on. I leave them off so people can customise the look unless you specified a sanded and undercoated option. In this case they will be glued on.

These helmets are printed at 200 micron, yes a helmet this size at 200 micron and in ABS there are no splits nor warps even though its been printed in ABS which will make it easy to finish, resistant to hot weather ( yes you can leave it in your hot car, but the paint will probably bubble before anything will happen to the helmet)

Why 3D printed? Its the future, it can be customised to your size, they are light weight, do not warp with heat or become brittle with time as they are printed in ABS. And each helmet is perfectly symmetrical as we do not use a mold which fatigues over time.

If your interested in printing this yourself I have shared a smaller version here, though this version has since been modified considerably and is capable of having fans mounted for cooling and is only available through this store.

http://www.thingiverse.com/thing:1786166 it was designed to print in segments on smaller printers. This helmet is printed on 400x400x500mm printer so it prints in 2 to 3 main parts depending on the size you select
This is a fully 3d printed super strong ABS Mandalorian Helmet code name: "The Drop Bear" It has some distinct advantages over resin helmets.

It comes with built in cooling ducts (optionally fitted with 2 speed USB Powered ducted fans that sit in purpose design holders in the cheeks of the helmet, they have covers so your hair will not get caught in the fan and extract air from the outside of the helmet and blow it out over the visor area, this will mean you remain cooler longer and your visor should not fog up.

Provison for two rocker switches that can be accessed easily while wearing the helmet. If you choose an option with fans, one will be occupied with a 3 position switch for the fans. The other is spare and can be used for future upgrades (for example voice amp or RF motor)

You will get:

Helmet - Medium Large sized helmet (boba sized)
Range Finder Earcaps or DeathWatch Style Earcaps
Electronic Visor template (you will need to ask me for this to email to you)
Fan duct covers
Screws to help put it together if you selected a kit option
Assemble Instructions and Finishing tutorial (online video)
If you select the Fan option you will also get: Fans, wires, 3 position switch and USB power cable

It will take approximately 3 weeks from order to ship this helmet as they are made on demand, I usually have stock but it can be dependent on the options you have picked. Sanding and Undercoating can take an additional week as we need to leave time for multiple coats to dry before shipping.

Jango Fett styled Range Finder and stalk or "deathwatch style left and right earcaps with no RF (please state which you want, the detault is the Jango style RF

The earcaps are separate pieces that need to be glued on. I leave them off so people can customise the look unless you specified a sanded and undercoated option. In this case they will be glued on.

These helmets are printed at 200 micron, yes a helmet this size at 200 micron and in ABS there are no splits nor warps even though its been printed in ABS which will make it easy to finish, resistant to hot weather ( yes you can leave it in your hot car, but the paint will probably bubble before anything will happen to the helmet)

Why 3D printed? Its the future, it can be customised to your size, they are light weight, do not warp with heat or become brittle with time as they are printed in ABS. And each helmet is perfectly symmetrical as we do not use a mold which fatigues over time.

If your interested in printing this yourself I have shared a smaller version here, though this version has since been modified considerably and is capable of having fans mounted for cooling and is only available through this store.

http://www.thingiverse.com/thing:1786166 it was designed to print in segments on smaller printers. This helmet is printed on 400x400x500mm printer so it prints in 2 to 3 main parts depending on the size you select

Reviews

5 out of 5 stars (450)

Payments

Secure options
  • Visa
  • Mastercard
  • American Express
  • Discover
  • Paypal
  • GiftcardAccepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.

Returns & exchanges

I gladly accept returns, exchanges, and cancellations

Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery
Request a cancellation within: 3 days of purchase

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Questions about your order?

Please contact me if you have any problems with your order.

Shipping policies

All items listed in this store are made on demand, as such there is sometimes a 6 week lead time from order to final production of your item.

Additional policies

All items listed in this store are sold as components or unfinished kits unless otherwise stated. They will require assembly, sanding, gluing and the like before they are considered finished products.

Related to this item

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…