Whoa! You can't buy your own item.

TINY (.55 x .9) Swedish Wrap KIT for all Dime-sized to Quarter-sized Coins for the Smallest Coin Rings, Charms, Pendants and Beads

Request a custom order and have something made just for you.

This seller usually responds within 24 hours.

TINY (.55 x .9) Swedish Wrap KIT for all Dime-sized to Quarter-sized Coins for the Smallest Coin Rings, Charms, Pendants and Beads

Ask a question

$93.75

Please select a quantity
Other people want this. 5 people have this in their carts right now.

Overview

  • Craft type: Jewelry making, Metalworking
  • Materials: Hardened Stainless Steel, High Quality Brass
  • Favorited by: 13 people
  • Gift message available
This shop accepts Etsy gift cards

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted
Exceptions may apply. See return policy

Description

This is the newest *tiny* Swedish Wrap die to compliment my original 3 Swedish Wrap Die Set combo that I personally designed in mid-2016.

Use this newest die to compress any fully folded-over US quarter, nickel, penny, and dime-sized coins, or to make the smallest coin rings, pendants, beads and charms from the larger coins!


Comes with:

1.) ONE 1.5” tall ”Swedish Wrap” Die (with .900” diameter opening x .550” diameter exit) made of high quality hardened stainless steel.

2.) THREE high quality Brass Push Rod Plungers that are each machined with DOUBLE-SIDED ends (for a total of SIX different outer diameter-sized push rod ends) to compress (and fully extrude if you want) your coin ring through the *TINY* Swedish Wrap Die. More brass push rod plunger sizes = more options and time savings by reducing the number of times that you have to shrink the reeded-end of your coin ring in the universal reduction dies to make it better fit the push rod plunger! ;-)

3.) TWO rolls of teflon pipe thread seal tape.



This die has the SMALLEST inner diameter exit opening for coins to pass through on the market today, allowing you to make the smallest “bead-sized” coin rings from the larger Challenge Coins, American Silver Eagles, Morgan Dollars, and Half Dollar-sized coin rings!


This *tiny* Swedish Wrap Die Kit is best used in conjunction with my original Swedish Wrap Die Set for all Half Dollar, Dollar and Silver Eagle-Sized Coin Rings, which can be found below:

https://www.etsy.com/listing/470134369/swedish-wrap-die-set-for-all-half-dollar?ref=shop_home_active_4



This new technique has revolutionized the way that larger coins are made into smaller-sized coin rings; all the while protecting the full detail of each coin.



*** SWEDISH WRAP METHOD STEPS: ***

After folding your coin ring (using the regular Universal Folding/Reduction dies), find the correct diameter brass push rod that covers the majority of the reeded-end of your coin. After annealing and wrapping the coin in Teflon thread tape, you place your folded-over coin ring into the appropriate sized die that it fits in, with the reeded edge facing UP.


Begin to compress (extrude) the coin down the die, pulling the coin out often to both re-anneal and to re-wrap the coin in pipe thread tape, and when necessary; flipping the brass push rod over to the next smaller diameter size to continue compressing the coin down the die. Continue to compress the coin ring further down the Swedish Wrap dies until you reach the size needed for further reduction.



* FOR THE “STRAIGHT-WALLED” COIN RING LOOK:
To achieve the “straight-walled” look, I like to compress the coin ring using the Swedish Wrap dies and then expanding the coin ring on the ring stretcher until I get to 3 sizes ABOVE my final desired target ring size. Then, using my deburring tool, I will remove the appropriate amount of material from the INSIDE of the thicker reeded part of the coin to achieve more of a "comfort fit". Next, using the 17-degree dies, I will reduce the sides of my coin ring until I have reached my final target size.


* FOR THE ROUNDED “FAT-TIRE” COIN RING LOOK:
For those wanting a rounded-look to their coin rings, you can first compress the coin using the Swedish Wrap dies and then expand it on your ring stretcher to 3 sizes ABOVE your final target size. You would then use the appropriate-sized Universal 17° die to first reduce the coin ring to get it close to your final target size, and then finish the coin ring off by using the 25° die to “tuck in” the sides more to achieve a more rounded “Fat Tire” look.



PLEASE KEEP THE FOLLOWING IN MIND WHEN USING THIS TECHNIQUE:

1.) TAKE YOUR TIME, especially when first starting out. I recommend Swedish Wrapping' a few rings out of clad coins to get familiar with the process.

2.) Make sure that you anneal your coin OFTEN, ideally after every press or two. Doing so will make the process easier.

3.) Use a LOT of pipe thread tape, and make sure to both re-anneal and re-wrap your coin ring often throughout the process. A 10-pack of the pipe thread tape can be purchased at HarborFreight.com for 2 dollars.

4.) Make sure that you firmly press the teflon-wrapped coin ring to make sure that it is seated evenly into the Swedish Wrap die before compressing with the brass push rod plungers.

5.) Press SLOW and make sure that the brass push rod covers the majority of the reeded portion of the coin. If it doesn’t cover enough of the reeds, the push rod could slip as you’re compressing it, possibly ruining the coin ring. You can fix this issue by placing the coin ring, (reeded side DOWN) into either your Universal 17°, 20°, or 25° reduction die to slightly shrink the outer diameter of the reeded side until the brass push rod better covers the reeds. * Be sure not to reduce TOO MUCH here, do just enough so that there's more coverage needed for the brass push rod.

6.) Make sure that you don't over press the brass push rods down the Swedish Wrap dies, especially when using a hydraulic press or an arbor press. At first, it's best to place the brass push rods into the dies WITHOUT the coin ring underneath. That way, you can get an idea of where the push rod "bottoms out" before actually compressing your coin. After some practice, you’ll be able to feel the resistance of when each push rod bottoms out in the dies.



The tiny-sized coin rings can be incorporated into charms on necklaces, beads, pendants, bracelet charms, or even earrings. The possibilities are many!

(Coin rings pictured are not included and are used for reference only.)



*** Here's why you should purchase your coin ring-making tools from the CoinRingUSA® Shop:


1.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.

2.) The level of quality of my tools is simply not duplicated elsewhere; as I use the highest quality Hardened Stainless Steel that is precision CNC-machined to the finest standards by expert machinists and hand polished to a smooth finish; unlike most other competitors' dies that have rough finishes to the inner die faces.

3.) Each die has also been precision engraved with the corresponding size opening for easy identification.

4.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

5.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.

6.) All of my coin ring-making tools are 100% guaranteed

7.) Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


To see the other coin ring-making tools available; be sure to visit: CoinRingUSA.com


Thanks, and here's to your coin ring-making success!



*** Shipping:

This set will be shipped by USPS Priority Mail with Signature Confirmation for U.S. residents.

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
This is the newest *tiny* Swedish Wrap die to compliment my original 3 Swedish Wrap Die Set combo that I personally designed in mid-2016.

Use this newest die to compress any fully folded-over US quarter, nickel, penny, and dime-sized coins, or to make the smallest coin rings, pendants, beads and charms from the larger coins!


Comes with:

1.) ONE 1.5” tall ”Swedish Wrap” Die (with .900” diameter opening x .550” diameter exit) made of high quality hardened stainless steel.

2.) THREE high quality Brass Push Rod Plungers that are each machined with DOUBLE-SIDED ends (for a total of SIX different outer diameter-sized push rod ends) to compress (and fully extrude if you want) your coin ring through the *TINY* Swedish Wrap Die. More brass push rod plunger sizes = more options and time savings by reducing the number of times that you have to shrink the reeded-end of your coin ring in the universal reduction dies to make it better fit the push rod plunger! ;-)

3.) TWO rolls of teflon pipe thread seal tape.



This die has the SMALLEST inner diameter exit opening for coins to pass through on the market today, allowing you to make the smallest “bead-sized” coin rings from the larger Challenge Coins, American Silver Eagles, Morgan Dollars, and Half Dollar-sized coin rings!


This *tiny* Swedish Wrap Die Kit is best used in conjunction with my original Swedish Wrap Die Set for all Half Dollar, Dollar and Silver Eagle-Sized Coin Rings, which can be found below:

https://www.etsy.com/listing/470134369/swedish-wrap-die-set-for-all-half-dollar?ref=shop_home_active_4



This new technique has revolutionized the way that larger coins are made into smaller-sized coin rings; all the while protecting the full detail of each coin.



*** SWEDISH WRAP METHOD STEPS: ***

After folding your coin ring (using the regular Universal Folding/Reduction dies), find the correct diameter brass push rod that covers the majority of the reeded-end of your coin. After annealing and wrapping the coin in Teflon thread tape, you place your folded-over coin ring into the appropriate sized die that it fits in, with the reeded edge facing UP.


Begin to compress (extrude) the coin down the die, pulling the coin out often to both re-anneal and to re-wrap the coin in pipe thread tape, and when necessary; flipping the brass push rod over to the next smaller diameter size to continue compressing the coin down the die. Continue to compress the coin ring further down the Swedish Wrap dies until you reach the size needed for further reduction.



* FOR THE “STRAIGHT-WALLED” COIN RING LOOK:
To achieve the “straight-walled” look, I like to compress the coin ring using the Swedish Wrap dies and then expanding the coin ring on the ring stretcher until I get to 3 sizes ABOVE my final desired target ring size. Then, using my deburring tool, I will remove the appropriate amount of material from the INSIDE of the thicker reeded part of the coin to achieve more of a "comfort fit". Next, using the 17-degree dies, I will reduce the sides of my coin ring until I have reached my final target size.


* FOR THE ROUNDED “FAT-TIRE” COIN RING LOOK:
For those wanting a rounded-look to their coin rings, you can first compress the coin using the Swedish Wrap dies and then expand it on your ring stretcher to 3 sizes ABOVE your final target size. You would then use the appropriate-sized Universal 17° die to first reduce the coin ring to get it close to your final target size, and then finish the coin ring off by using the 25° die to “tuck in” the sides more to achieve a more rounded “Fat Tire” look.



PLEASE KEEP THE FOLLOWING IN MIND WHEN USING THIS TECHNIQUE:

1.) TAKE YOUR TIME, especially when first starting out. I recommend Swedish Wrapping' a few rings out of clad coins to get familiar with the process.

2.) Make sure that you anneal your coin OFTEN, ideally after every press or two. Doing so will make the process easier.

3.) Use a LOT of pipe thread tape, and make sure to both re-anneal and re-wrap your coin ring often throughout the process. A 10-pack of the pipe thread tape can be purchased at HarborFreight.com for 2 dollars.

4.) Make sure that you firmly press the teflon-wrapped coin ring to make sure that it is seated evenly into the Swedish Wrap die before compressing with the brass push rod plungers.

5.) Press SLOW and make sure that the brass push rod covers the majority of the reeded portion of the coin. If it doesn’t cover enough of the reeds, the push rod could slip as you’re compressing it, possibly ruining the coin ring. You can fix this issue by placing the coin ring, (reeded side DOWN) into either your Universal 17°, 20°, or 25° reduction die to slightly shrink the outer diameter of the reeded side until the brass push rod better covers the reeds. * Be sure not to reduce TOO MUCH here, do just enough so that there's more coverage needed for the brass push rod.

6.) Make sure that you don't over press the brass push rods down the Swedish Wrap dies, especially when using a hydraulic press or an arbor press. At first, it's best to place the brass push rods into the dies WITHOUT the coin ring underneath. That way, you can get an idea of where the push rod "bottoms out" before actually compressing your coin. After some practice, you’ll be able to feel the resistance of when each push rod bottoms out in the dies.



The tiny-sized coin rings can be incorporated into charms on necklaces, beads, pendants, bracelet charms, or even earrings. The possibilities are many!

(Coin rings pictured are not included and are used for reference only.)



*** Here's why you should purchase your coin ring-making tools from the CoinRingUSA® Shop:


1.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.

2.) The level of quality of my tools is simply not duplicated elsewhere; as I use the highest quality Hardened Stainless Steel that is precision CNC-machined to the finest standards by expert machinists and hand polished to a smooth finish; unlike most other competitors' dies that have rough finishes to the inner die faces.

3.) Each die has also been precision engraved with the corresponding size opening for easy identification.

4.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

5.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.

6.) All of my coin ring-making tools are 100% guaranteed

7.) Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


To see the other coin ring-making tools available; be sure to visit: CoinRingUSA.com


Thanks, and here's to your coin ring-making success!



*** Shipping:

This set will be shipped by USPS Priority Mail with Signature Confirmation for U.S. residents.

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Reviews

5 out of 5 stars
(1,280)

Payments

Secure options
Paypal Visa Mastercard American Express Discover Giftcard
Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
I accept PayPal and all major Credit cards and Debit cards. If you do not have a PayPal account, you can still make your payment through Paypal using your credit or debit card, or; you can pay through Etsy directly for your items.

Major Debit or Credit Cards:

- VISA
- MasterCard
- American Express
- Discover

Returns & exchanges

I gladly accept returns and exchanges

Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery

I don't accept cancellations

But please contact me if you have any problems with your order.

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Returns and exchange details

All items are 100% guaranteed.

Shipping policies

*** NOTE *** Please combine the saved items in your shopping cart BEFORE you check out in order to save on shipping costs.

Processing time may vary between items ordered.

My Shop ships worldwide! If you are ordering from outside of the United States, please be aware that your country may impose a VAT, (Value Added Tax); (also known as a Customs Duty), on the order. You will be asked to pay this additional fee before receiving your parcel. Please research your country's laws and any additional fees that may be placed on the items you'd like to order.

Also be aware that your Customs may delay the package for an unknown period of time. You will need to inquire with your local Post Office or postal service for further delivery information. My Shop is not responsible for customs delays.

Customs forms paperwork will be placed on the package to expedite the process.

Additional policies

Thank you for your business! Reviews of the tools purchased are always appreciated.

If you would like to place a custom order, please select the blue "Request Custom Order" tab on my Shop's Homepage, or send me a message through Etsy with your request.

Slight non-functional variations of things such as color, texture, and engraving on items may occur from time to time.

SAFETY FIRST! Always use safety glasses and keep hair and loose clothing away from pinch points and sources of heat while working.

You may also like

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…