H-Frame Metal Table Legs (10" - 35") Set of 2 for Dining, Coffee or Sofa Tables, Desks or Benches - Straight/Square

.
All frames are now powder coated for free! Powder coating is like paint, but better. Please reach out if you have any questions about sizing or if you do not see what you are looking for, we are here to help.
Best
Allegra & Ryan

Why Order From Us?
We offer:
A slotted offset mounting bracket - This allows wood to expand over time.
Adjustable floor glides - These protect your flooring and prevents your table from rocking.
A wide range of heights and widths - Get the custom dimensions you need.
Continued customer support - We're always here to help make your design dreams a reality.

▲▲ Product Details ▲▲
- Each order includes 2 legs
- Made from 1.5" square tubing
- Mounting bracket is 3'' wide - slotted and offset - pre-drilled for ¼” screws
(Frames with widths 10" - 11" have 3 holes 12" - 15” are have 4 holes; 16” and wider 5 holes)
- Floor protectors included with your purchase
- The frames will ship powder coated black.
All our legs are hand built in North America

Please contact us if you require an odd number or need custom sizing, we would be happy to assist.

▲▲ How to order ▲▲
1- Choose quantity (each order includes two legs)
2- Choose the appropriate height for your project (measured from the floor to the top of the bracket)
3- Choose the best width for your project (measured outside to outside of the bracket)
4- Add to Cart

Looking for other styles of metal legs?
Check out our hairpin legs, Floating, Tapered Trapezoid legs here: https://etsy.me/2wx9x8r

▲▲ FAQs ▲▲
What type of screws do I need?
Our mounting bracket has slots to accomodate ¼” screws. We recommend using pan head or hex screws. Screw length will depend on the installation surface and/or thickness of your table top. The folks at your local hardware store can better advise.

How do I select the right leg height for my project?
To determine the right height, first consider how high you want the top surface of your piece to be overall and then deduct the thickness of the material you will be mounting the legs to. For example, if you want your dining room table to stand at 30” high and your wooden table top is 2” thick, we would recommend the 28” height.

Below is a list of standard heights for common DIY projects.
12 - 18” - Coffee Table (the table should be lower than 2” from the seat of your couch)
16” - Bench
28” - Dining Table, Desk (there should be 12” between your seating and the top of the table).
28 - 30” - Entryway, Foyer Table, Console Table, Sofa Table (the table should be level with the back of the sofa or 1” below it)

Will I need to finish or treat the raw steel legs?
Yes. Overtime, raw steel will naturally oxidize (rust); how fast that will occur depends on your local climate conditions. To finish your legs, you have many options. The majority of our customers spray paint their legs and any paint primer intended for metal will do the job. If you wish to keep the industrial look of the raw steel, Penetrol, available online and at most big box stores in the States, is also an effective sealant. To preserve your piece for many years to come, we recommend powder coating your legs (now done free).

We also make aluminum legs. Suitable for indoor and outdoor use, the great thing with aluminum is that it will never rust. To view our collection of aluminum tubed legs please visit: https://etsy.me/2LcD1j4

Looking for other styles of metal legs?
Check out our entire collection here: https://www.etsy.com/ca/shop/MetalTableLegs.coCo