Terrain | Wargaming | Fuel Pump Generator | 28mm | Warhammer 40K | Wargame Terrain | Necromunda | Zone Mortalis | PrinTerrain

PrinTerrain

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

Terrain | Wargaming | Fuel Pump Generator | 28mm | Warhammer 40K | Wargame Terrain | Necromunda | Zone Mortalis | PrinTerrain

Message Seller

$7.95

Almost gone. There's only 1 left.

Item details

Handmade Supply

Made to order

The PrinTerrain Fuel Pump Generator is small sized generator/fuel pump.

This piece of scenery works great as part of an industrial themed terrain setup.

The Fuel Pump/Generator works with other PrinTerrain models like the Plasma Accelerator, Massive Generator and Cooling Towers. Combine this model with our other scenery to represent a power plant or an engine room on a starship. Use it as an objective in your battles in the underhive. The massive generator can also be connected to other scenery via the pipe socket and is compatible with popular commercial game terrain like Games Workshops Promethium Pipes set. The pipe socket can also be covered with the included optional cover plates.

Scaled for 28mm - 32mm games. The Massive Generator is approximately 3.5 inches tall X 7 inches wide X 14 inches long and is perfect for games like Warhammer 40K, The Horus Heresy, Necromunda, Infinity, and other Sci Fi tabletop games.

Approximate dimensions: 1.25 inches tall x 3.5” wide x 3.5” long

3D printedin parts in gray PLA plastic.

This is a 3D printed item and is made to order and supplied unfinished. You’ll need to finish it using typical modeling supplies like sandpaper, files, primer and paint.

We recommend basecoating it with a filler primer like Krylon and then painting it with acrylic hobby paints.

Thanks for looking at our Etsy listing and check out our web shop at www.gamemats.com for even more tabletop wargaming accessories like 3D printable STL’s and awesome mousepad style gaming mats in a variety of designs and sizes.

ABOUT 3D PRINTING

3D printers create objects layer by layer, slowly. Think of it like an endless tube of toothpaste depositing one line at a time. During this layering, there may be minor imperfections. On some parts, layer lines are also visible. These can easily be fixed if you decide you’d like to have a more polished look on your final piece. For 3d printed terrain you can use filler primer such as Krylon or sprays from auto parts stores. Also consider using textured paint, flock, static grass or other products commonly used in terrain modeling for miniature wargaming terrain.

We don’t do any finishing or post production. All products are sold “as-is” fresh from our 3D printer farm. Product pictures in our listings are always actual prints straight from our 3D printers and are representative of the quality you will receive. If you’d like to see images of finished parts by us and by members of our community, check out our social media.

We strive to create models that are playable, printable, durable and of course have that “neato” factor. If there are any issues or problems with a 3D printed part that you receive from us, let us know! We want you to be happy with your items. We’ll do our best to resolve any issues.

ABOUT PRINTERRAIN

PrinTerrain on Etsy is the “get it printed” side of GameMats.Com 3D printable wargames terrain. If you have your own 3D printer, many of our STL’s are available for purchase at our main website.

We also manufacture mousepad style wargaming mats for tabletop games like Warhammer 40K, Bolt Action, The Horus Heresy, Star Wars Legion, Age of Sigmar, Frostgrave, Star Wars X-Wing and more!

All GameMats.Com mats are high quality neoprene with a layer of fabric bonded to the top that has a 300dpi image printed on it via dye sublimation. Mats are available in a variety of themes and sizes to suit most any style of gaming from skirmish level to massive apocalypse sized battles. Mats also include a sturdy transport case and a bag tag with an image of the mat on one side and a place to write your personal info on the other.

SHIPPING DETAILS

Your items will be sent to the address that you provide at the time that you place your order. Shipping is via USPS and is calculated by Etsy's shipping interface. We never add any extra handling fees to shipping costs.

Please make sure your delivery address is correct and complete! If a package is returned to us due to incorrect shipping information, it is the buyer's responsibility to pay for the applicable shipping costs to have the package re-sent.
The PrinTerrain Fuel Pump Generator is small sized generator/fuel pump.

This piece of scenery works great as part of an industrial themed terrain setup.

The Fuel Pump/Generator works with other PrinTerrain models like the Plasma Accelerator, Massive Generator and Cooling Towers. Combine this model with our other scenery to represent a power plant or an engine room on a starship. Use it as an objective in your battles in the underhive. The massive generator can also be connected to other scenery via the pipe socket and is compatible with popular commercial game terrain like Games Workshops Promethium Pipes set. The pipe socket can also be covered with the included optional cover plates.

Scaled for 28mm - 32mm games. The Massive Generator is approximately 3.5 inches tall X 7 inches wide X 14 inches long and is perfect for games like Warhammer 40K, The Horus Heresy, Necromunda, Infinity, and other Sci Fi tabletop games.

Approximate dimensions: 1.25 inches tall x 3.5” wide x 3.5” long

3D printedin parts in gray PLA plastic.

This is a 3D printed item and is made to order and supplied unfinished. You’ll need to finish it using typical modeling supplies like sandpaper, files, primer and paint.

We recommend basecoating it with a filler primer like Krylon and then painting it with acrylic hobby paints.

Thanks for looking at our Etsy listing and check out our web shop at www.gamemats.com for even more tabletop wargaming accessories like 3D printable STL’s and awesome mousepad style gaming mats in a variety of designs and sizes.

ABOUT 3D PRINTING

3D printers create objects layer by layer, slowly. Think of it like an endless tube of toothpaste depositing one line at a time. During this layering, there may be minor imperfections. On some parts, layer lines are also visible. These can easily be fixed if you decide you’d like to have a more polished look on your final piece. For 3d printed terrain you can use filler primer such as Krylon or sprays from auto parts stores. Also consider using textured paint, flock, static grass or other products commonly used in terrain modeling for miniature wargaming terrain.

We don’t do any finishing or post production. All products are sold “as-is” fresh from our 3D printer farm. Product pictures in our listings are always actual prints straight from our 3D printers and are representative of the quality you will receive. If you’d like to see images of finished parts by us and by members of our community, check out our social media.

We strive to create models that are playable, printable, durable and of course have that “neato” factor. If there are any issues or problems with a 3D printed part that you receive from us, let us know! We want you to be happy with your items. We’ll do our best to resolve any issues.

ABOUT PRINTERRAIN

PrinTerrain on Etsy is the “get it printed” side of GameMats.Com 3D printable wargames terrain. If you have your own 3D printer, many of our STL’s are available for purchase at our main website.

We also manufacture mousepad style wargaming mats for tabletop games like Warhammer 40K, Bolt Action, The Horus Heresy, Star Wars Legion, Age of Sigmar, Frostgrave, Star Wars X-Wing and more!

All GameMats.Com mats are high quality neoprene with a layer of fabric bonded to the top that has a 300dpi image printed on it via dye sublimation. Mats are available in a variety of themes and sizes to suit most any style of gaming from skirmish level to massive apocalypse sized battles. Mats also include a sturdy transport case and a bag tag with an image of the mat on one side and a place to write your personal info on the other.

SHIPPING DETAILS

Your items will be sent to the address that you provide at the time that you place your order. Shipping is via USPS and is calculated by Etsy's shipping interface. We never add any extra handling fees to shipping costs.

Please make sure your delivery address is correct and complete! If a package is returned to us due to incorrect shipping information, it is the buyer's responsibility to pay for the applicable shipping costs to have the package re-sent.

Shipping & returns

Ready to ship in 1–2 weeks
From United States
Returns and exchanges accepted
Exceptions may apply. See return policy

Reviews

5 out of 5 stars (85)

Payment options

Secure options
Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.

Returns & exchanges

I gladly accept returns and exchanges

Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery

I don't accept cancellations

But please contact me if you have any problems with your order.

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Conditions of return

Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.

You may also like