Jango Fett Style Mandalorian Helmet (The Drop Bear) with integrated cooling 3D Print files

Instant download

AprilStormProps

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

Jango Fett Style Mandalorian Helmet (The Drop Bear) with integrated cooling 3D Print files

Message Seller

$14.90


Item details

Digital download (5 ZIP)

Material

ABS Plastic

These are the 3d print files to 3d print a Mandalorian Helmet code name: "The Drop Bear" It has some distinct advantages over resin helmets.

Minimum printer size requirements: 250mmx250mm W 280mm H

The design comes with built in cooling ducts which you can optionally fit ducted fans that sit in purpose design holders in the cheeks of the helmet, they have covers so your hair will not get caught in the fan and extract air from the outside of the helmet and blow it out over the visor area, this will mean you remain cooler longer and your visor should not fog up.

Provision for two rocker switches that can be accessed easily while wearing the helmet. The other is spare and can be used for future upgrades (for example voice amp or RF motor)

All the helmet files to print the helmet in a variety of options, the helmet is design in a minimum of two parts so you do not need to use as many supports and was specifically design to be printed, its not just some render that someone has cut up with no idea how to print something.

The helmet has been pre-sized to Small, Medium/Large and XL based roughly on Bell motorcycle helmet sizing.

This helmet can be and has been successfully printed in ABS, ASA, PETG, PLA, PLA+ If printed in PLA the helmet has been designed with screw mounting points so you can bolt it together and not rely on glue. If you print in ABS I still recommend ABS welding, as its just a stronger attachment.

You get the regular fett/jango earcaps but also deathwatch and Fenn Rau.

The earcaps are separate pieces that need to be glued on. I leave them off so people can customise the look There are a few different styles included in the download inclused a rebels Fenn Rau pilot style.

I personally print these helmets are at 200 micron using some high end machines and have printed about 50 so far. These models are the refined versions with all overhangs and optimisations already applied, no messing around on your part.

These are the model of fan that are used in this helmet: https://www.ebay.com.au/itm/4cm-40mm-40x40x10mm-5V-Brushless-Square-Blower-Centrifugal-Turbo-Cooling-Fan-2p/262895452902?hash=item3d35ca42e6:g:M1sAAOSwsW9YyL2J
These are the 3d print files to 3d print a Mandalorian Helmet code name: "The Drop Bear" It has some distinct advantages over resin helmets.

Minimum printer size requirements: 250mmx250mm W 280mm H

The design comes with built in cooling ducts which you can optionally fit ducted fans that sit in purpose design holders in the cheeks of the helmet, they have covers so your hair will not get caught in the fan and extract air from the outside of the helmet and blow it out over the visor area, this will mean you remain cooler longer and your visor should not fog up.

Provision for two rocker switches that can be accessed easily while wearing the helmet. The other is spare and can be used for future upgrades (for example voice amp or RF motor)

All the helmet files to print the helmet in a variety of options, the helmet is design in a minimum of two parts so you do not need to use as many supports and was specifically design to be printed, its not just some render that someone has cut up with no idea how to print something.

The helmet has been pre-sized to Small, Medium/Large and XL based roughly on Bell motorcycle helmet sizing.

This helmet can be and has been successfully printed in ABS, ASA, PETG, PLA, PLA+ If printed in PLA the helmet has been designed with screw mounting points so you can bolt it together and not rely on glue. If you print in ABS I still recommend ABS welding, as its just a stronger attachment.

You get the regular fett/jango earcaps but also deathwatch and Fenn Rau.

The earcaps are separate pieces that need to be glued on. I leave them off so people can customise the look There are a few different styles included in the download inclused a rebels Fenn Rau pilot style.

I personally print these helmets are at 200 micron using some high end machines and have printed about 50 so far. These models are the refined versions with all overhangs and optimisations already applied, no messing around on your part.

These are the model of fan that are used in this helmet: https://www.ebay.com.au/itm/4cm-40mm-40x40x10mm-5V-Brushless-Square-Blower-Centrifugal-Turbo-Cooling-Fan-2p/262895452902?hash=item3d35ca42e6:g:M1sAAOSwsW9YyL2J

Delivery & returns

Your files will be available to download once payment is confirmed. Here's how.
I don't accept returns, exchanges, or cancellations
But please contact me if you have any problems with your order. See return policy

Reviews

5 out of 5 stars (515)

Returns & exchanges

I gladly accept returns, exchanges, and cancellations

Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery
Request a cancellation within: 3 days of purchase

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Questions about your order?

Please contact me if you have any problems with your order.

Payments

Secure options
Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.

Additional policies

All items listed in this store are sold as components or unfinished kits unless otherwise stated. They will require assembly, sanding, gluing and the like before they are considered finished products.