Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite your own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

Close
You don't have any treasuries yet. Enter a title below to create one.
Close

This item has been added.

View your treasury.

Wreath Door Hanger, 1000001-38, Plasma Cut Metal, Metal Cut Out, Metal Cutout, Door Hanger, Sign Hanger, Steel Hanger, Metal Art Door Hanger

Like this item?

Add it to your favorites to revisit it later.
Favorite
Request a custom order and have something made just for you.

Description

Due to the nature of online selling, it is important that you read the entire listing description and FAQs, as well as view the photos prior to your purchase. All items are custom designed and cut to your selections. No cancellations, refunds or exchanges are allowed.

▬ ▬ ▬ ▬ ▬ ▬ ▬ SHAPE SPECIFICS ▬ ▬ ▬ ▬ ▬ ▬ ▬

*This is an AnneLayneMetalArt Original Design*

Wreath or Metal Art Door Hanger

We can personalize your hanger for you according to what can fit in each option. Each design can fit certain information...1 Letter, 3 Letters, Name/Word. You will find this information in the listing photos. You will want to put this information in the ●'Add a note to AnneLayneMetalArt'● message box at checkout in this format:

1 LETTER:
Letter-

3 LETTERS:
Left-
Center-
Right

NAME/WORD:
Type the name and double check the spelling. It will be in all CAPS for the Name/Word Plates.

1 Letter and 3 Letter Initials will be in VINE BOLD Font.
Name/Word Plates (1000003 & 1000018) will be in CAPEB Font.

**For the closed in Frames (circles, squares, etc.), you can find your font choices in the 'Custom Names and Words' or 'Letters and Numbers' sections of my other shop until I have them listed here, AnneLayneToo (link below).**

Numbers are also welcome in these signs.

https://www.etsy.com/shop/AnneLayneToo

Size: 22" L- See Photos for width dimensions. You will find this information near the center of each design. This width dimension is for the entire width of the item (Left to Right).

The size you need is relative to the project you are working on. ALWAYS, measure for your project at hand.

▬ ▬ ▬ ▬ ▬ ▬ ▬ MATERIALS- Steel OR Aluminum ▬ ▬ ▬ ▬ ▬ ▬ ▬

We use 14 gauge Hot Rolled or Cold Rolled Steel and Marine Grade 0.090" Aluminum that are all Made in the USA. For comparison purposes, the steel is just a hair thicker than a quarter and the aluminum is slightly thicker than a nickel. The finish type you choose will dictate which metal type is used.

The Raw Mill Scale Metal, Industrial Finish, Mill Scale/Copper Finish, Opaque Finishes, and the Powder Coated selections for steel will be Hot Rolled Steel. All other finishes use the Cold Rolled Steel. You can also select Raw Aluminum, or choose to have it Powder Coated.

--STEEL--
Steel is strong, hard, and MAGNETIC!! It is heavier than Aluminum and less likely to warp. However, steel is also corrosive and will rust easily if left unfinished even for a short period of time. If you order the Raw Hot Rolled Mill Scale option, I strongly suggest finishing it in some manner not long after you receive it. OR if you want a rust look, you can:
(1) Order the Raw Mill Scale Option, grind the mill scale off, and let it rust naturally (or use a salt water dilute or vinegar water dilute to speed up the process), then apply a clear coat.
(2) Order the Cold Rolled Option and simply ask us to leave off the clear coat . It will begin to rust fairly quickly without the clear coat, but you can speed up the process with the same salt/vinegar dilutes above then apply a clear coat when the rust is to your liking.

--ALUMINUM--
Aluminum is not as strong as steel. It is very porous and less dense, thus much lighter than steel, but harder to clean. It will dent, ding, and scratch more easily as compared to steel. Aluminum is NOT magnetic. Aluminum will not rust, but it will oxidize.

▬ ▬ ▬ ▬ ▬ ▬ ▬ FINISHES WE OFFER, DELIVERY TIMES & CARE ▬ ▬ ▬ ▬ ▬ ▬ ▬

● ○ ◌ →PLEASE NOTE: ←◌ ○ ●

1) Only the POWDER COATED finish selections are recommended for outdoor use. They are UV resistant. All other finishes should remain indoors unless *you* seal them with a high quality, UV resistant clear coat lacquer or spray to protect from fading and abrasions.

2) With the exception of Powder Coating, due to the nature of steel and the finishes used, every item will have it's own unique look. The steel will take some finishes bolder or lighter on the same piece. This is what gives your item it's uniqueness. No two finishes will be the same.

3) Not all Finishes can be done on every piece. For Example, outdoor items can only be Powder Coated or ordered Raw to be Finished By You, so only the Powder Coat finish options AND Raw Mill Scale are selectable options for outdoor items.

4) The quickest delivered orders are those of just Raw Mill Scale Metal and Raw Aluminum. You can easily finish them on your own with spray paint. You will need a primer, your color of choice, and optionally, though we highly recommend, a clear coat sealer. This can be done directly out of the box with no other preparation before the primer.

5) YOU can make any of these items outdoor-friendly with several coats of a high quality, UV resistant clear coat lacquer or spray over your primer & color.

6) Photos of finishes shown in the listing are taken outside unless specified otherwise.
__________________________________________________________________________________________

MOST POPULAR SELECTION IS RAW MILL SCALE HOT ROLLED STEEL.
__________________________________________________________________________________________

● Raw Mill Scale Steel- Hot Rolled Steel with Mill Scale cut directly out of the sheet and shipped. No clear coat will be applied. You will be responsible to finish as you wish. 7-10 BUSINESS DAYS

● Raw Aluminum- Marine Grade Aluminum cut directly out of the sheet and shipped. No clear coat will be applied. You will be responsible to finish as you wish. 7-10 BUSINESS DAYS

● Cold Rolled Steel- Raw Cold Rolled Steel grinded to get a nice reflective patterned surface. Clear Coat will be applied. 7-10 BUSINESS DAYS

● Industrial Finish- Hot Rolled Steel with Mill Scale given an industrial look. Clear Coat will be applied. 7-10 BUSINESS DAYS

● Matte Black Powder Coat Steel (PC-ST)- Hot Rolled Metal Sand Blasted then Powder Coated with Matte Black. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Black Powder Coat Steel (PC-ST)- Hot Rolled Metal Sand Blasted then Powder Coated with Gloss Black. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Red Powder Coat Steel (PC-ST)- Hot Rolled Metal Sand Blasted then Powder Coated with Gloss Red. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Silver Powder Coat Steel (PC-ST)- Hot Rolled Metal Sand Blasted then Powder Coated with Gloss Silver. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Matte Black Powder Coat Aluminum (PC-AL)- Marine Grade Aluminum Sand Blasted then Powder Coated with Matte Black. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Black Powder Coat Aluminum (PC-AL)- Marine Grade Aluminum Sand Blasted then Powder Coated with Gloss Black. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Red Powder Coat Aluminum (PC-AL)- Marine Grade Aluminum Sand Blasted then Powder Coated with Gloss Red. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Silver Powder Coat Aluminum (PC-AL)- Marine Grade Aluminum Sand Blasted then Powder Coated with Gloss Silver. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Mill Scale/Copper- Hot Rolled Steel with Mill Scale given a Copper Finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Copper- Raw Cold Rolled Steel with a Copper finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Midnight Glow- Raw Cold Rolled Steel with a Midnight Glow finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Copper/Midnight Glow- Raw Cold Rolled Steel with a Copper/Midnight Glow finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Copper/Singe- Raw Cold Rolled Steel with a Copper/Singe finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Opaque Burnt Orange- Raw Hot Rolled Steel with Opaque Burnt Orange finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Opaque Seafoam- Raw Hot Rolled Steel with an Opaque Light Seafoam finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Opaque Snow White- Raw Hot Rolled Steel primed and spray painted an Opaque Snow White finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Brick- Raw Cold Rolled Steel with Translucent Brick Red finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Cobalt- Raw Cold Rolled Steel with Translucent Cobalt Blue finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Gunmetal- Raw Cold Rolled Steel with Translucent Gunmetal Black finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Harvest Gold- Raw Cold Rolled Steel with Translucent Harvest Gold finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Kelly Green- Raw Cold Rolled Steel with Translucent Kelly Green finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Lilac- Raw Cold Rolled Steel with Translucent Lilac Purple finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Magenta- Raw Cold Rolled Steel with Translucent Magenta Pink finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Sepia- Raw Cold Rolled Steel with Translucent Sepia Brown finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Sky Blue- Raw Cold Rolled Steel with Translucent Vibrant Sky Blue finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Gold- Raw Cold Rolled Steel with Translucent Shimmer Gold finish. Clear Coat will be applied. 12-18 BUSINESS DAYS

__________________________________________________________________________________________

** To Clean, use a mild soap and wipe the soap off with a damp cloth. You will also want to take a dry cloth to wipe fully dry.***
__________________________________________________________________________________________

▬ ▬ ▬ ▬ ▬ ▬ ▬ NEED HOLES OR A SLOT FOR HANGING? ▬ ▬ ▬ ▬ ▬ ▬ ▬

●1● If you need holes in the piece you are purchasing, that is easily accomplished. Please tell me that in 'Add a note to AnneLayneMetalArt' section **AT CHECKOUT** and tell me 1 or 2 holes and where you want them.

Please use this format:
How many Holes?
Where, EXACTLY, do you want Hole 1?
Where, EXACTLY, do you want Hole 2 (if needed)?

● ○ ◌ →HOLES ARE CUT COMPLETELY THROUGH THE METAL PIECE ←◌ ○ ●

If you ask for 1 hole, BE SPECIFIC as to where you want the hole if the piece you are purchasing does not have vertical symmetry (right and left sides match if the shape is folded in half). Typically, 2 holes are put in irregular shaped pieces to allow you to adjust your hanging apparatus for level hanging of unbalanced pieces like these.
_________________

●2● If you need a slot in your piece to hang with our metal door hanger,
https://www.etsy.com/listing/615422881/wreath-door-hanger-1000001-38-plasma-cut
we can place it on the top center of your metal cut out as long as it is a circle, square, rectangle, or symmetric shape. Please tell me that in 'Add a note to AnneLayneMetalArt' section **AT CHECKOUT**.
_________________

**THIS INFORMATION MUST BE GIVEN IN THE NOTES AT CHECKOUT. **

If a message is sent after the purchase, I can't guarantee it will be read prior to cutting and packaging as things move fast around here, so make sure to put your request in the notes when you checkout. Also, if we are not told a specific location for the holes, we will place them where we feel is best. If where we think is best was not what you envisioned, this does not warrant a refund.

There is no charge for this. YES. It is FREE!!

▬ ▬ ▬ ▬ LOVE WHAT YOU SEE BUT WANT IT IN UNFINISHED WOOD? ▬ ▬ ▬ ▬

Click on the link below to access our other shop homepage where you will find over 2200 of the most AMAZING designs that will satisfy a variety of your DIY interests.

If you do not find this design there, let me know, and I will see what I can do to add it.

https://www.etsy.com/shop/AnneLayneToo

▬ ▬ ▬ ▬ ▬ ▬ ▬ SHIPPING ▬ ▬ ▬ ▬ ▬ ▬ ▬

Free Shipping...We ESTIMATE your purchase from order to door in 14 Business Days or Less (with the exception of Powder Coated Pieces) for all items delivered within the continental US.

We will ship to Alaska, Hawaii, APOs and the US Territories, HOWEVER, there is an additional shipping fee associated with purchases to those areas. Please use the link below as an add-on to your order if your destination address is in any of these areas.

https://www.etsy.com/listing/611710611/shipping-to-alaska-hawaii-apos-and-us

You will receive a tracking number once your items have shipped. We ARE NOT responsible for UPS/USPS delays in shipping. Should you have concerns with regard to your package shipment timeline, please direct your inquiries to UPS (1-800-742-5877) / USPS (1-800-275-8777) and let their experts help you. We are certainly not the expert in their business, so we will always defer to them to answer their shipping questions.

Please check the Shop Announcements (under the featured items on my shop homepage) for any processing or shipping delays due to short-term shop closures or the Holiday hustle-and-bustle that there might be during your purchase period.

▬ ▬ ▬ ▬ ▬ ▬ ▬ IDEAS FOR USE ▬ ▬ ▬ ▬ ▬ ▬ ▬

Magnetic Message Board (Steel ONLY)
Yard Art (Steel ONLY)
Desk Sign
Address Plate
Name Plate
Personalize a nursery or child's room
Personalize your front door
Create a personalized wall hanging
Add a personal touch to craft projects
Create your own signs
Weddings
Showers
Birthdays
Celebrations
Photo Props
Teacher Gifts
Co-worker Gifts
Graduation Gifts
Holiday Gifts
Special Events
Religious Events
Wall Art
Door Hangers
Birth Announcement
Sports Sign
Bleacher Sign
Dance Props
Cheer Props
Class Room Display Sign
Craft Fair Display Sign
Expo Sign
School Projects
School Spirit
Housewarming Gift
House Closing Gift

▬ ▬ ▬ ▬ ▬ ▬ ▬ SHOP POLICIES ▬ ▬ ▬ ▬ ▬ ▬ ▬

By making a purchase from AnneLayneMetalArt, you are agreeing to all of our policies. Furthermore, it is very important that you read the 'Frequently asked questions' and review all listing photos before you purchase your items through AnneLayneMetalArt.

__________________________________________________________________________________________

ANY Designs, Graphic Images, and Photographs found in my listings and in my shop are the property of AnneLayne. I do not allow my designs to be copied in any form for resell. You may, however, purchase my listing, take the unfinished piece and create a whole new level of fun and interest, and resell it in your Etsy shop, at a craft fair, gift-it to a special someone, use it for an event, or keep it for yourself.

Thank you for getting to this point in the listing. If you have any questions, please do not hesitate to contact me through Etsy messaging. While I know it is faster to have a phone conversation, I have made it my policy to do all communication through Etsy messenger. It allows me to refer back to your notes and my notes as they are written in the message to make sure your questions are answered fully and the details are handled in a structured format to avoid mistakes.

All the best!
~Rebecca Edwards
Owner, AnneLayneDesigns, AnneLayneToo, & AnneLayneMetalArt
Due to the nature of online selling, it is important that you read the entire listing description and FAQs, as well as view the photos prior to your purchase. All items are custom designed and cut to your selections. No cancellations, refunds or exchanges are allowed.

▬ ▬ ▬ ▬ ▬ ▬ ▬ SHAPE SPECIFICS ▬ ▬ ▬ ▬ ▬ ▬ ▬

*This is an AnneLayneMetalArt Original Design*

Wreath or Metal Art Door Hanger

We can personalize your hanger for you according to what can fit in each option. Each design can fit certain information...1 Letter, 3 Letters, Name/Word. You will find this information in the listing photos. You will want to put this information in the ●'Add a note to AnneLayneMetalArt'● message box at checkout in this format:

1 LETTER:
Letter-

3 LETTERS:
Left-
Center-
Right

NAME/WORD:
Type the name and double check the spelling. It will be in all CAPS for the Name/Word Plates.

1 Letter and 3 Letter Initials will be in VINE BOLD Font.
Name/Word Plates (1000003 & 1000018) will be in CAPEB Font.

**For the closed in Frames (circles, squares, etc.), you can find your font choices in the 'Custom Names and Words' or 'Letters and Numbers' sections of my other shop until I have them listed here, AnneLayneToo (link below).**

Numbers are also welcome in these signs.

https://www.etsy.com/shop/AnneLayneToo

Size: 22" L- See Photos for width dimensions. You will find this information near the center of each design. This width dimension is for the entire width of the item (Left to Right).

The size you need is relative to the project you are working on. ALWAYS, measure for your project at hand.

▬ ▬ ▬ ▬ ▬ ▬ ▬ MATERIALS- Steel OR Aluminum ▬ ▬ ▬ ▬ ▬ ▬ ▬

We use 14 gauge Hot Rolled or Cold Rolled Steel and Marine Grade 0.090" Aluminum that are all Made in the USA. For comparison purposes, the steel is just a hair thicker than a quarter and the aluminum is slightly thicker than a nickel. The finish type you choose will dictate which metal type is used.

The Raw Mill Scale Metal, Industrial Finish, Mill Scale/Copper Finish, Opaque Finishes, and the Powder Coated selections for steel will be Hot Rolled Steel. All other finishes use the Cold Rolled Steel. You can also select Raw Aluminum, or choose to have it Powder Coated.

--STEEL--
Steel is strong, hard, and MAGNETIC!! It is heavier than Aluminum and less likely to warp. However, steel is also corrosive and will rust easily if left unfinished even for a short period of time. If you order the Raw Hot Rolled Mill Scale option, I strongly suggest finishing it in some manner not long after you receive it. OR if you want a rust look, you can:
(1) Order the Raw Mill Scale Option, grind the mill scale off, and let it rust naturally (or use a salt water dilute or vinegar water dilute to speed up the process), then apply a clear coat.
(2) Order the Cold Rolled Option and simply ask us to leave off the clear coat . It will begin to rust fairly quickly without the clear coat, but you can speed up the process with the same salt/vinegar dilutes above then apply a clear coat when the rust is to your liking.

--ALUMINUM--
Aluminum is not as strong as steel. It is very porous and less dense, thus much lighter than steel, but harder to clean. It will dent, ding, and scratch more easily as compared to steel. Aluminum is NOT magnetic. Aluminum will not rust, but it will oxidize.

▬ ▬ ▬ ▬ ▬ ▬ ▬ FINISHES WE OFFER, DELIVERY TIMES & CARE ▬ ▬ ▬ ▬ ▬ ▬ ▬

● ○ ◌ →PLEASE NOTE: ←◌ ○ ●

1) Only the POWDER COATED finish selections are recommended for outdoor use. They are UV resistant. All other finishes should remain indoors unless *you* seal them with a high quality, UV resistant clear coat lacquer or spray to protect from fading and abrasions.

2) With the exception of Powder Coating, due to the nature of steel and the finishes used, every item will have it's own unique look. The steel will take some finishes bolder or lighter on the same piece. This is what gives your item it's uniqueness. No two finishes will be the same.

3) Not all Finishes can be done on every piece. For Example, outdoor items can only be Powder Coated or ordered Raw to be Finished By You, so only the Powder Coat finish options AND Raw Mill Scale are selectable options for outdoor items.

4) The quickest delivered orders are those of just Raw Mill Scale Metal and Raw Aluminum. You can easily finish them on your own with spray paint. You will need a primer, your color of choice, and optionally, though we highly recommend, a clear coat sealer. This can be done directly out of the box with no other preparation before the primer.

5) YOU can make any of these items outdoor-friendly with several coats of a high quality, UV resistant clear coat lacquer or spray over your primer & color.

6) Photos of finishes shown in the listing are taken outside unless specified otherwise.
__________________________________________________________________________________________

MOST POPULAR SELECTION IS RAW MILL SCALE HOT ROLLED STEEL.
__________________________________________________________________________________________

● Raw Mill Scale Steel- Hot Rolled Steel with Mill Scale cut directly out of the sheet and shipped. No clear coat will be applied. You will be responsible to finish as you wish. 7-10 BUSINESS DAYS

● Raw Aluminum- Marine Grade Aluminum cut directly out of the sheet and shipped. No clear coat will be applied. You will be responsible to finish as you wish. 7-10 BUSINESS DAYS

● Cold Rolled Steel- Raw Cold Rolled Steel grinded to get a nice reflective patterned surface. Clear Coat will be applied. 7-10 BUSINESS DAYS

● Industrial Finish- Hot Rolled Steel with Mill Scale given an industrial look. Clear Coat will be applied. 7-10 BUSINESS DAYS

● Matte Black Powder Coat Steel (PC-ST)- Hot Rolled Metal Sand Blasted then Powder Coated with Matte Black. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Black Powder Coat Steel (PC-ST)- Hot Rolled Metal Sand Blasted then Powder Coated with Gloss Black. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Red Powder Coat Steel (PC-ST)- Hot Rolled Metal Sand Blasted then Powder Coated with Gloss Red. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Silver Powder Coat Steel (PC-ST)- Hot Rolled Metal Sand Blasted then Powder Coated with Gloss Silver. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Matte Black Powder Coat Aluminum (PC-AL)- Marine Grade Aluminum Sand Blasted then Powder Coated with Matte Black. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Black Powder Coat Aluminum (PC-AL)- Marine Grade Aluminum Sand Blasted then Powder Coated with Gloss Black. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Red Powder Coat Aluminum (PC-AL)- Marine Grade Aluminum Sand Blasted then Powder Coated with Gloss Red. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Gloss Silver Powder Coat Aluminum (PC-AL)- Marine Grade Aluminum Sand Blasted then Powder Coated with Gloss Silver. 1-3 WEEKS- SEE ANNOUNCEMENT SECTION FOR PROCESSING TIME UPDATES

● Mill Scale/Copper- Hot Rolled Steel with Mill Scale given a Copper Finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Copper- Raw Cold Rolled Steel with a Copper finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Midnight Glow- Raw Cold Rolled Steel with a Midnight Glow finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Copper/Midnight Glow- Raw Cold Rolled Steel with a Copper/Midnight Glow finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Copper/Singe- Raw Cold Rolled Steel with a Copper/Singe finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Opaque Burnt Orange- Raw Hot Rolled Steel with Opaque Burnt Orange finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Opaque Seafoam- Raw Hot Rolled Steel with an Opaque Light Seafoam finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Opaque Snow White- Raw Hot Rolled Steel primed and spray painted an Opaque Snow White finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Brick- Raw Cold Rolled Steel with Translucent Brick Red finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Cobalt- Raw Cold Rolled Steel with Translucent Cobalt Blue finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Gunmetal- Raw Cold Rolled Steel with Translucent Gunmetal Black finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Harvest Gold- Raw Cold Rolled Steel with Translucent Harvest Gold finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Kelly Green- Raw Cold Rolled Steel with Translucent Kelly Green finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Lilac- Raw Cold Rolled Steel with Translucent Lilac Purple finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Magenta- Raw Cold Rolled Steel with Translucent Magenta Pink finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Sepia- Raw Cold Rolled Steel with Translucent Sepia Brown finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Sky Blue- Raw Cold Rolled Steel with Translucent Vibrant Sky Blue finish. Clear Coat will be applied. 10-14 BUSINESS DAYS

● Translucent Gold- Raw Cold Rolled Steel with Translucent Shimmer Gold finish. Clear Coat will be applied. 12-18 BUSINESS DAYS

__________________________________________________________________________________________

** To Clean, use a mild soap and wipe the soap off with a damp cloth. You will also want to take a dry cloth to wipe fully dry.***
__________________________________________________________________________________________

▬ ▬ ▬ ▬ ▬ ▬ ▬ NEED HOLES OR A SLOT FOR HANGING? ▬ ▬ ▬ ▬ ▬ ▬ ▬

●1● If you need holes in the piece you are purchasing, that is easily accomplished. Please tell me that in 'Add a note to AnneLayneMetalArt' section **AT CHECKOUT** and tell me 1 or 2 holes and where you want them.

Please use this format:
How many Holes?
Where, EXACTLY, do you want Hole 1?
Where, EXACTLY, do you want Hole 2 (if needed)?

● ○ ◌ →HOLES ARE CUT COMPLETELY THROUGH THE METAL PIECE ←◌ ○ ●

If you ask for 1 hole, BE SPECIFIC as to where you want the hole if the piece you are purchasing does not have vertical symmetry (right and left sides match if the shape is folded in half). Typically, 2 holes are put in irregular shaped pieces to allow you to adjust your hanging apparatus for level hanging of unbalanced pieces like these.
_________________

●2● If you need a slot in your piece to hang with our metal door hanger,
https://www.etsy.com/listing/615422881/wreath-door-hanger-1000001-38-plasma-cut
we can place it on the top center of your metal cut out as long as it is a circle, square, rectangle, or symmetric shape. Please tell me that in 'Add a note to AnneLayneMetalArt' section **AT CHECKOUT**.
_________________

**THIS INFORMATION MUST BE GIVEN IN THE NOTES AT CHECKOUT. **

If a message is sent after the purchase, I can't guarantee it will be read prior to cutting and packaging as things move fast around here, so make sure to put your request in the notes when you checkout. Also, if we are not told a specific location for the holes, we will place them where we feel is best. If where we think is best was not what you envisioned, this does not warrant a refund.

There is no charge for this. YES. It is FREE!!

▬ ▬ ▬ ▬ LOVE WHAT YOU SEE BUT WANT IT IN UNFINISHED WOOD? ▬ ▬ ▬ ▬

Click on the link below to access our other shop homepage where you will find over 2200 of the most AMAZING designs that will satisfy a variety of your DIY interests.

If you do not find this design there, let me know, and I will see what I can do to add it.

https://www.etsy.com/shop/AnneLayneToo

▬ ▬ ▬ ▬ ▬ ▬ ▬ SHIPPING ▬ ▬ ▬ ▬ ▬ ▬ ▬

Free Shipping...We ESTIMATE your purchase from order to door in 14 Business Days or Less (with the exception of Powder Coated Pieces) for all items delivered within the continental US.

We will ship to Alaska, Hawaii, APOs and the US Territories, HOWEVER, there is an additional shipping fee associated with purchases to those areas. Please use the link below as an add-on to your order if your destination address is in any of these areas.

https://www.etsy.com/listing/611710611/shipping-to-alaska-hawaii-apos-and-us

You will receive a tracking number once your items have shipped. We ARE NOT responsible for UPS/USPS delays in shipping. Should you have concerns with regard to your package shipment timeline, please direct your inquiries to UPS (1-800-742-5877) / USPS (1-800-275-8777) and let their experts help you. We are certainly not the expert in their business, so we will always defer to them to answer their shipping questions.

Please check the Shop Announcements (under the featured items on my shop homepage) for any processing or shipping delays due to short-term shop closures or the Holiday hustle-and-bustle that there might be during your purchase period.

▬ ▬ ▬ ▬ ▬ ▬ ▬ IDEAS FOR USE ▬ ▬ ▬ ▬ ▬ ▬ ▬

Magnetic Message Board (Steel ONLY)
Yard Art (Steel ONLY)
Desk Sign
Address Plate
Name Plate
Personalize a nursery or child's room
Personalize your front door
Create a personalized wall hanging
Add a personal touch to craft projects
Create your own signs
Weddings
Showers
Birthdays
Celebrations
Photo Props
Teacher Gifts
Co-worker Gifts
Graduation Gifts
Holiday Gifts
Special Events
Religious Events
Wall Art
Door Hangers
Birth Announcement
Sports Sign
Bleacher Sign
Dance Props
Cheer Props
Class Room Display Sign
Craft Fair Display Sign
Expo Sign
School Projects
School Spirit
Housewarming Gift
House Closing Gift

▬ ▬ ▬ ▬ ▬ ▬ ▬ SHOP POLICIES ▬ ▬ ▬ ▬ ▬ ▬ ▬

By making a purchase from AnneLayneMetalArt, you are agreeing to all of our policies. Furthermore, it is very important that you read the 'Frequently asked questions' and review all listing photos before you purchase your items through AnneLayneMetalArt.

__________________________________________________________________________________________

ANY Designs, Graphic Images, and Photographs found in my listings and in my shop are the property of AnneLayne. I do not allow my designs to be copied in any form for resell. You may, however, purchase my listing, take the unfinished piece and create a whole new level of fun and interest, and resell it in your Etsy shop, at a craft fair, gift-it to a special someone, use it for an event, or keep it for yourself.

Thank you for getting to this point in the listing. If you have any questions, please do not hesitate to contact me through Etsy messaging. While I know it is faster to have a phone conversation, I have made it my policy to do all communication through Etsy messenger. It allows me to refer back to your notes and my notes as they are written in the message to make sure your questions are answered fully and the details are handled in a structured format to avoid mistakes.

All the best!
~Rebecca Edwards
Owner, AnneLayneDesigns, AnneLayneToo, & AnneLayneMetalArt

Reviews

5 out of 5 stars
(3)

Payment options

Secure options
  • Visa
  • Mastercard
  • American Express
  • Discover
  • Paypal
  • GiftcardAccepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.

Returns & exchanges

I don't accept returns, exchanges, or cancellations
But please contact me if you have any problems with your order.

FAQs

We ship USPS Priority Mail mostly with some First Class Mail and UPS exceptions- (under 15.9 oz ships First Class and over 30" will typically ship UPS) which you can easily track through Etsy...well 90% of the time if the drivers remember to scan the packages. In a perfect world, we expect 2-3 day delivery times with USPS Priority and 3-5 day for First Class.

Orders to Alaska, Hawaii, APOs and the US Territories will have an additional shipping fee and can take 5-7 days longer. (Please see this listing to purchase the additional shipping charges associated with the number of pieces in your order.)

https://www.etsy.com/listing/611710611/shipping-to-alaska-hawaii-apos-and-us
I do not accept cancellations if your order has started the design/cut process, and this can happen from 5 minutes to 24 hours after you have placed your order.

Since all items are cut to order, no refunds or exchanges are allowed...even if USPS is at fault.

MEASURE ○ ○ MEASURE ○ ○ MEASURE ○ ○ MEASURE

The size of your piece you need is relative to the project you are working on, that is why I offer so many sizes. Take measurements ● BEFORE ● you place an order. It is too late to realize that it is too small or too big once it has been shipped.
We do not refund for any items that have been damaged or lost in transit. We will, however, REPLACE any damaged or lost items caused by shipping.
You will need to complete the steps below for damaged items:
***THIS MUST BE DONE WITHIN 7 DAYS OF DELIVERY***
a) Take a CLEAR photo of all the packaging that was around your piece.
b) Take a CLEAR, CLOSE-UP photo of the shipping label.
c) Take a CLEAR photo of the whole item on the box so that the shipping label can be seen.
d) Take a CLEAR, CLOSE-UP photo of the point of breakage.
e) Send all 4 of the photos to me through convo.
f) Once we have received these photos, your new piece will be cut and shipped.
If your item is returned back to us due to shipping issues or an incorrect address on Etsy, you will become responsible for additional shipping and handling to the updated address.
We use 14 gauge (.075") Hot Rolled or Cold Rolled Steel and Marine Grade 0.090" Aluminum that are Made in the USA. The finish type you choose will dictate one or the other.
The Raw Mill Scale Metal, Industrial Finish, Copper/Mill Scale, and Powder Coated selections will be Hot Rolled Steel. All other finishes use the Cold Rolled Steel.
Be advised that typically, USPS/UPS will leave these packages at your door, or if they are small enough, in your mailbox. At no time does it become our responsibility if USPS/UPS shows that the package has been delivered, and it comes up missing. Most times, other family members have captured the packages, and brought them inside, but stranger things have happened. Please make sure that the address you give through Etsy for delivery of your package is a safe place to leave your items. THERE ARE NO REFUNDS/RECUTS FOR YOUR PURCHASE ONCE THE ITEMS SHOW TO HAVE BEEN DELIVERED. Also, you can contact your local USPS/UPS facility who will check with the driver for verification of where they have left the package.
Priority Mail and First Class Mail through USPS and shipments by UPS are NOT GUARANTEED services. That means the delivery-time quotes given to us are estimates ONLY. USPS/UPS often changes their expected delivery date while your package is in transit if there are schedule changes that will prevent them from delivering on time.

You will receive a tracking number once your items have shipped. We ARE NOT responsible for UPS/USPS delays in shipping. Should you have concerns with regard to your package shipment timeline, please direct your inquiries to UPS (1-800-742-5877) / USPS (1-800-275-8777) and let their experts help you. We are certainly not the expert in their business, so we will always defer to them to answer their shipping questions.
I sure do:)

I am happy to help anyone achieve what they might have in mind. However, having to design from scratch or change any listing in any way to suit specific needs takes quite a bit of time. To insure that the requester is serious about purchasing a custom sign and has a clear understanding of the time it takes in this design process, this custom design work will only be started once we have discussed the small details, sizing, fonts, etc., and I have received payment for the custom order request. Please keep in mind, I do not offer refunds for any reason once the purchase has been made.
We are happy to add holes or a slot to your item to hang by nails. This is Easy to do and Free for you. Make sure to put that in your notes at checkout. Messages to add holes after checkout may not be read prior to cutting the piece.

You can hang with our door hanger.
https://www.etsy.com/listing/612277295/wreath-door-hanger-1000001-38-plasma-cut
Ask for a slot in your piece at checkout

Lighter items can be hung with command strips.

If you have a metal door, magnetic hooks may work as well depending on the size and weight.

Your purchase of the metal art does not come with ribbon, hangers, or wire.

3M, Scotch, etc. makes Clear Adhesive Bumpers that you can apply to the back to keep it from slamming loudly when closing your door.
With the exception of the powder coated pieces, no two finishes are exactly alike. Not even the raw mill scaled cut outs will look the same. Your item will have it's own characteristics that allow the finishes to be bolder in some places and lighter in others. There is no way to exactly duplicate a finish. We will, however, use the same products that the finish you have chosen requires, and we will do our best to produce the same quality finish that you see in the photos.

AnneLayneMetalArt made this item with help from

  • Alan M, Fort Worth, TX
AnneLayneMetalArt made this item with help from:
  • Alan M, Fort Worth, TX

Wreath Door Hanger, 1000001-38, Plasma Cut Metal, Metal Cut Out, Metal Cutout, Door Hanger, Sign Hanger, Steel Hanger, Metal Art Door Hanger

Ask a question

$57.00+

Free shipping to United States
Please select a finish
Please select an option
Please select a quantity

Overview

  • Handmade item
  • Craft: Engraving, Metalworking, Painting, Sculpture, Woodworking & carpentry
  • Materials: Steel, Hot Rolled Steel, Cold Rolled Steel, Steel Made in the USA, Patina, Powder Coat, 14 gauge, Raw Steel, Powder Coated Steel, Finished Steel, 14 gauge steel, Dye, Stain
  • Made to order
  • Feedback: 3 reviews
This shop accepts Etsy gift cards

Shipping & returns

Ready to ship in 1–3 weeks
From Baton Rouge, Louisiana
No returns or exchanges
But please contact me if you have any problems with your order.

You may also like

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…