Whoa! You can't buy your own item.

Book Scanning Frame

Request a custom order and have something made just for you.

This seller usually responds within 24 hours.

Book Scanning Frame

Ask a question

$93.72+

Please select an option
Please select an option
Please select a quantity

Overview

  • Handmade item
  • Made to order
  • Favorited by: 7 people
This shop accepts Etsy gift cards

Shipping & returns

Ready to ship in 4–6 weeks
From The Netherlands
Returns and exchanges accepted
Exceptions may apply. See return policy

Description

This frame allows scanning books with a smartphone.

The frame consists of two main parts: base and support frame for the phone(s).
Base allows you to open a book at 90-degree angle which makes the open pages to be almost flat. To make them even flatter, the lower part of the phone support includes two pieces of glass that press down the pages even more.

Using this frame I have achieved a speed of 10-15 seconds per scanned page. To improve the results it may be useful to use voice commands to operate your phone's camera.

Additional software is needed for post-processing and turning a book into PDF.
In my experience, the total time spent per page to create the final PDF (without OCR and editing) is 20-30 seconds per page.

Book scanning frame is sold in two sizes:
- Large may accommodate books with page sizes up to 23x31 cm
- Medium is designed for the books with page sizes up to 18x25 cm

Basic set includes:
- Stand x2
- Base board x2
- Glass angle protector x4
- Multiple degree (85-100) glass holder x2
- Phone arm x2
- 1 cm spacer x10
- Thirds marker x4
- Phone holder x1

All glass-related elements are designed for 2 mm thick glass.
Please advise if you plan on using a glass of different thickness.
Warning: WITH THE BASIC SET YOU HAVE TO BUY TWO PIECES OF GLASS FOR THE FRAME TO WORK

Full set includes:
- Stand x2
- Base board x2
- Museum glass x2 (*)
- Glass angle protector x4
- 90-degree glass holder x2 (*)
- Multiple degree (85-100) glass holder x2
- Double-degree phone arm x2 (*)
- 1 cm spacer x10
- Thirds marker x4 (*)
- Phone holder x2 (*)

Elements marked (*) are available only with the full set.

Multiple degree glass holders allow you to differentiate the angles of the opening from 85-degree angle to 100-degree angle. That accommodates for different books opening at slightly different angles due to their sizes, type of binding and materials used.

Double-degree phone arm allows for two angles: 90 degrees and 100 degrees.

Please write the model of your smartphone (or smartphones) in the comments section of the order to get a personalized set.

The final quality of the scanned book depends on the specifications of your smartphone's camera.
The smartphone is not included.

By default, jigs are printed in any random color available at the moment. If you want to choose some specific color, please write us a message. Colors currently available are listed in our FAQ section: https://www.etsy.com/shop/BonefolderClub#more-section
If you want to get your jigs printed in some other color, that may be done for an additional 10 Euro fee (if the color is available at our supplier).
This frame allows scanning books with a smartphone.

The frame consists of two main parts: base and support frame for the phone(s).
Base allows you to open a book at 90-degree angle which makes the open pages to be almost flat. To make them even flatter, the lower part of the phone support includes two pieces of glass that press down the pages even more.

Using this frame I have achieved a speed of 10-15 seconds per scanned page. To improve the results it may be useful to use voice commands to operate your phone's camera.

Additional software is needed for post-processing and turning a book into PDF.
In my experience, the total time spent per page to create the final PDF (without OCR and editing) is 20-30 seconds per page.

Book scanning frame is sold in two sizes:
- Large may accommodate books with page sizes up to 23x31 cm
- Medium is designed for the books with page sizes up to 18x25 cm

Basic set includes:
- Stand x2
- Base board x2
- Glass angle protector x4
- Multiple degree (85-100) glass holder x2
- Phone arm x2
- 1 cm spacer x10
- Thirds marker x4
- Phone holder x1

All glass-related elements are designed for 2 mm thick glass.
Please advise if you plan on using a glass of different thickness.
Warning: WITH THE BASIC SET YOU HAVE TO BUY TWO PIECES OF GLASS FOR THE FRAME TO WORK

Full set includes:
- Stand x2
- Base board x2
- Museum glass x2 (*)
- Glass angle protector x4
- 90-degree glass holder x2 (*)
- Multiple degree (85-100) glass holder x2
- Double-degree phone arm x2 (*)
- 1 cm spacer x10
- Thirds marker x4 (*)
- Phone holder x2 (*)

Elements marked (*) are available only with the full set.

Multiple degree glass holders allow you to differentiate the angles of the opening from 85-degree angle to 100-degree angle. That accommodates for different books opening at slightly different angles due to their sizes, type of binding and materials used.

Double-degree phone arm allows for two angles: 90 degrees and 100 degrees.

Please write the model of your smartphone (or smartphones) in the comments section of the order to get a personalized set.

The final quality of the scanned book depends on the specifications of your smartphone's camera.
The smartphone is not included.

By default, jigs are printed in any random color available at the moment. If you want to choose some specific color, please write us a message. Colors currently available are listed in our FAQ section: https://www.etsy.com/shop/BonefolderClub#more-section
If you want to get your jigs printed in some other color, that may be done for an additional 10 Euro fee (if the color is available at our supplier).

Reviews

5 out of 5 stars
(74)
  • tracker1123 Dec 10, 2018
    5 out of 5 stars
    Exactly as ordered / requested - great contact to confirm too.
    Bookbinding Bakelite Folder
  • Laura Mendel Nov 25, 2018
    5 out of 5 stars
    These keys are on my sewing station as I write. Sturdy, just the right size, do not bend under the stress of my double cords strung violin string tight (probably too tight, we'll see...). I'm impressed. I have tapes on the H's and they are perfect as well. My tapes are pulled tight too. I think these keys are going to work out great! Thank you! Communication was exemplary. Shipping was fine for the distance across the Atlantic. All around a five star experience.
    Bookbinding Sewing Keys (set of 20)
  • Ariane Nov 16, 2018
    5 out of 5 stars
  • Ariane Nov 16, 2018
    5 out of 5 stars

Payment options

Secure options
  • Visa
  • Mastercard
  • American Express
  • Discover
  • Paypal
  • GiftcardAccepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.

Returns & exchanges

I gladly accept returns and exchanges

Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery

I don't accept cancellations

But please contact me if you have any problems with your order.

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Digital downloads

Conditions of return

Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.

FAQs

Currently, we print in PLA and PETG (that latter is archival safe but more expensive).

Available PLA colors include:
- Orange;
- Golden/Yellow;
- Dark Green;
- Light Green
- Olive/Bronze;
- Dark Blue;
- Sky Blue
- Purple;
- Pink;
- Red;
- Semi-translucent white;
- White;
- Silver/Grey;
- Black.

If you want your jigs/tools to be printed in some specific color, it may be done for an additional fee of 10 Euro (if the color is available at our supplier).
PETG is available in semi-translucent white only at the moment. However, if you want your jigs/tools to be printed in some other color, it may be done for an additional fee of 30 Euro (if the color is available at our supplier)

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…