DIY BlasTech DLT-20a Laser Rifle Blaster Kit from Star Wars IG-88 and Stormtroopers

AprilStormProps

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

DIY BlasTech DLT-20a Laser Rifle Blaster Kit from Star Wars IG-88 and Stormtroopers

Message Seller

$150.00

Please select a quantity
Almost gone. There's only 2 left.

Item details

Handmade item

Made to order

These are all the 3D printed parts needed to make a full size replica DLT-20a laser rifle from Star Wars ESB used by IG-88

The parts are scaled correctly in mm and have been printed in durable ABS (NOT PLA) So they will glue with regular model glue and are easy to sand and finish, and unlike PLA will not deteriorate over time and not deform or go soft if you accidentally left it in a hot care.

Please note that this kit requires you to Purchase a 16mm plastic or metal tube which is used to strengthen the build and are available from most hardware stores. This forms the center barrel inside the barrel shroud.

Also, because of how the barrel prints, it is required to print in two parts, I recommend you plastic weld these together using acetone. The shroud also tends to print a bit more rough than other parts because of all the wholes. These is easly address by just using a power sander on the parts before assembly to remove any rough edges, unfortunately this is very hard to avoid because of the design of the blaster.

The DLT-20A laser rifle was a model of laser rifle produced by BlasTech Industries. Members of the Galactic Empire's Stormtrooper Corps sometimes used DLT-20As instead of their standard issue E-11 blaster rifles. but most notably The droid bounty hunter IG-88 sometimes used this model of rifle, and carried one with it when on board the Executor-class Star Dreadnought Executor answering the Sith Lord Darth Vader's summons.
These are all the 3D printed parts needed to make a full size replica DLT-20a laser rifle from Star Wars ESB used by IG-88

The parts are scaled correctly in mm and have been printed in durable ABS (NOT PLA) So they will glue with regular model glue and are easy to sand and finish, and unlike PLA will not deteriorate over time and not deform or go soft if you accidentally left it in a hot care.

Please note that this kit requires you to Purchase a 16mm plastic or metal tube which is used to strengthen the build and are available from most hardware stores. This forms the center barrel inside the barrel shroud.

Also, because of how the barrel prints, it is required to print in two parts, I recommend you plastic weld these together using acetone. The shroud also tends to print a bit more rough than other parts because of all the wholes. These is easly address by just using a power sander on the parts before assembly to remove any rough edges, unfortunately this is very hard to avoid because of the design of the blaster.

The DLT-20A laser rifle was a model of laser rifle produced by BlasTech Industries. Members of the Galactic Empire's Stormtrooper Corps sometimes used DLT-20As instead of their standard issue E-11 blaster rifles. but most notably The droid bounty hunter IG-88 sometimes used this model of rifle, and carried one with it when on board the Executor-class Star Dreadnought Executor answering the Sith Lord Darth Vader's summons.

Shipping & returns

Ready to ship in 3–4 weeks
From Australia
Shipping upgrades available in the cart
Returns and exchanges accepted
Exceptions may apply. See return policy

Reviews

5 out of 5 stars (490)

Payments

Secure options
Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.

Returns & exchanges

I gladly accept returns, exchanges, and cancellations

Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery
Request a cancellation within: 3 days of purchase

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Questions about your order?

Please contact me if you have any problems with your order.

Shipping policies

All items listed in this store are made on demand, as such there is sometimes a 6 week lead time from order to final production of your item.

Additional policies

All items listed in this store are sold as components or unfinished kits unless otherwise stated. They will require assembly, sanding, gluing and the like before they are considered finished products.