Sterling silver ring with Cubic Zirconia stones tube set in a sequence on a disc. Ring is available in a size 8. Very contemporary and unique! Fabricated by hand using sterling sheet, tubing, and rectangle wire. A disc is cut from the sheet, polished and pieces of sterling tubing are cut and soldered to it. A ring shank is formed from sterling rectangle wire. The wire is cut, bent, and hammered to form a circle. It is then soldered closed and polished. The disc is soldered to the ring shank and the fine silver is raised to the surface to remove firescale and prevent tarnishing. a 2mm, 3mm, & 4mm Cubic Zirconia stone is set in the tubing. The piece is brought to a glossy finish. The disc is about 7/8 of an inch in diameter. Ring shank is 4mm wide.