Custom Laser Engraved Metallic Gold 8-oz Flask + Flask Funnel + FREE In-Country Shipping


Free shipping to United States
Please select an option

Feel free to email or message us with your custom instructions, and attach any desired image graphics to your email. We don't want to state a character limit, but that depends on the desired font size.

This item requires personalization
You’ve reached the limit! Use 256 characters or less.
Please select a quantity

Item details





1) FREE Flask Funnel with every flask ordered thru this listing!
2) FREE 1-Sided Custom Lasering Per Flask Ordered!
3) FREE In-Country Shipping Thru USPS!
4) FREE In-Country Shipping Upgrade To Priority Mail For Orders Of 2 Or More Flasks To Same Address!

READ MORE INFORMATION BELOW, to find out all of your options, and know exactly what you're receiving with this listing. Feel free to email us with any questions you still have after reading thru the information below.


These nice flasks come all in ONE piece, with the permanently attached screw-top lid! We add at least 2 layers of your choice of color, and allow to fully dry. We then add your custom lasering to either one or both sides, based on the requirements of your paid order.

This specific flask style will hold up to 8 ounces of your favorite Uncle's choice of adult "sipping beverage." It stands approximately 6" tall, is about 3-3/4" wide across the front, and just more than ¾" thick.

After your order's details are confirmed and paid for, we take these flasks and apply at least two layers of your color choice. We then laser thru those color layers, down to the silver color of the stainless steel flasks themselves. We apply our colors via industrial sprayer, and then hang dry them to minimize or eliminate "dripping" of the color(s). The "Metallic" color choices tend to be the faster-drying options.

NOTE: Read below to find out more about our "lasering" technique, versus the more expensive and damaging laser "etching" options employed by some providers. For lasering, we MUST have a color choice in order to have your custom lasering show on your flask(s).

Scroll below to see our wide variety of color options available. There is no need to close on a listing with your specific color request. We can create your order in your choice of color thru this listing.


Of course, this depends on the size of your order(s), but we always favor the larger orders over the smaller ones. Typically, most orders will ship within 3-4 days (or less, sometimes) from when your custom details have been confirmed, and will ship through USPS regular or Priority Mail. The in-transit time will depend on your location compared with Northern Colorado, where your orders will ship from.


We use a 100-watt laser engraving machine to customize all of your color flasks. It does not "etch" into the metal, but will burn thru the color layers, and reveal the silver of the stainless steel metal below. Laser "etched" flasks can sometimes spring leaks over time, if the flasks are actually used, because "etching" requires the carving of the metal itself. When you carve at the stainless steel flask walls, you're removing metal strength. Thru normal wear and tear of regular use, your flasks will sometimes spring leaks in small areas of the etched regions. So, burning thru your color choices, and down TO the stainless steel helps to retain the strength integrity of your flasks, forever!

When you order our leather-wrapped flask options, though, we DO "engrave" or "etch" beyond just the color layers selected. With this nice flask style, we will laser burn thru the color layers, as well as thru the leather wrap, but stop at the stainless steel surfaces, too, for the reasons explained above. So, if you would prefer the more laser "etched" look and feel, ask us about our factory leather-wrapped flask options, and we can relay a link to our listings for the sizes you want.

We can help you find the right image you need for your order, or you can send your own. If you send your own, make sure that it is 1-dimensional (3-D images don't work for this type of 1-dimensional lasering), and pure black and white. Our laser burn-cuts EVERYTHING that isn't pure white, evenly. That means that all non-whites will laser evenly, which will lose the definition that different colors provide to a standard color printed picture. Email us, if you want examples of images that will work.

Size-wise, your images need to be at least the size of your flask surface(s), or larger. We can reduce an image to the correct size needed without image quality loss. However, if we enlarge smaller or tiny images, the lines start getting fuzzy or pixely. Again, email us your images, and we'll work with you to help get them right.


For orders of 12 or more flasks, we can discuss quantity discounts with you. We offer discounts off orders in the following increments:
12 Flasks.
25 Flasks.
50 Flasks.
100+ Flasks.
Please email us for more information, Prices include in-country shipping, and are adjusted as postage rates increase.


You also do NOT have to stay with the color choice shown. You can request your flasks be made in any of the colors we currently offer. In fact, if you need flasks made in different colors in the same order, you can order them all through this listing, and then just let us know the colors you want them each made in. If you don't see a color listed that you like, please email us thru this listing, and we'll see if we can get it in for your order.

Here are all of your color choices:

Metallic Color Options: (These dry much quicker!)

**Metallic Black
**Moonlight Metallic Black (it has gold and silver crystals in it.)
**Metallic Gold
**Metallic Copper (appears like a brighter Metallic Gold)
**Metallic Dark Gold
**Metallic Purple
**Metallic (Dark) Blue
**Metallic Silver
**Metallic Cherry Red
**Metallic Green
**Metallic Textured Sea Green
**Metallic Hammered Copper
**Metallic Hammered Silver
**Metallic Hammered Green
**Metallic Hammered Gold (lighter gold)
**Metallic Hammered Gloss Dark Brown
**Metallic Hammered Gloss Black
**Textured Sandstone Camo
**(more Metallic Color Options Will Be Added Soon)

Non-Metallic Color Options:

**Gloss Black
**Leather Brown
**Forest Green
**Fire Red
**Dark Purple
**Light Purple
**Dark Blue
**Light Blue
**Satin Pink
**Pumpkin Orange

If you don't see a favorite color listed here, feel free to email us with your request (, and we'll look into it for you as quickly as we can.

Thanks again for shopping here in our Etsy store, and we look VERY forward to helping create just the right flask order for you!

Shipping & policies

Ready to ship in 3–5 business days
From United States
Free shipping to United States
Shipping upgrades available in the cart

Meet TrinketsnTreasures17



This seller usually responds within a few hours.


5 out of 5 stars (3)

TrinketsnTreasures17 made this item with help from

  • Color Added Flask Supplier, Greeley, CO
TrinketsnTreasures17 made this item with help from:
  • Color Added Flask Supplier, Greeley, CO