****Please Read****

The Interior/Exterior Retique It Kit comes with everything you need to complete your project(s), and it ships for free!
Message me with your color and finish choices or leave them in the order notes

**Included in the SMALL kit -
Small kit covers about 25sqft -
One 8oz Retique Wood'n Primer (color of your choice)
One 8oz Retique Wood'n Stain (color of your choice)
One 8oz Tripletique (recommended for interior projects) OR Polytique It Exterior (recommended for exterior projects) (in the finish of your choice)
2 piece wood Graining Tool Set
Pair of gloves
Rag
Chip brush
Sponge (I personally prefer to apply topcoats using a sponge instead of brushes)

**Small with Stain Kit will also include an 8oz of stain in your choice of color. This isn't necessary, but can be used to add more color and dimension or use it as a glaze to darken edges and make details pop.

**Included in the MEDIUM kit -
Medium kit covers about 50sqft -
One 16oz Retique Wood'n Primer (color of your choice)
One 16oz Retique Wood'n Stain (color of your choice)
One 16oz Tripletique (recommended for interior projects) OR Polytique It Exterior (recommended for exterior projects) (in the finish of your choice)
2 piece wood Graining Tool Set
Pair of gloves
Rag
Chip brush
Sponge

**Medium with Stain Kit will also include 8oz of stain in a color of your choice


***AFTER YOU MAKE THE PURCHASE, SEND ME A MESSAGE WITH YOUR COLOR AND TOPCOAT CHOICES
OR
INCLUDE YOUR CHOICES IN THE NOTES SECTION DURING CHECKOUT***

⬇️⬇️ Options Below ⬇️⬇️

**Choose One Retique It Wood'n Primer (this is your base color) -
Light, Dark or Bleached

**Choose one Retique It Wood'n Stain (this is your wood grain color) -
Classic Black, Java, Weather Wood, Black Walnut, Driftwood, Vintage Cherry, Red Mahogany, Barnwood, Old Oak, Pickled Oak, Walnut, Charcoal, Pecan, Cedar, Dark Oak, or White Washed

**Choose One Retique It Topcoat -
Interior - Tripletique - a super hard, scratch resistant, clear finish sealer
with exceptional clarity.
Exterior - Polytique - a water-based, marine grade sealer with three UV
stabilizers as well as mold and mildew resistance built in.
**Choose your topcoat finish -
Matte, Satin or Gloss

**For The With Stain Kits, Choose One Stain Color (this is to deepen the color of the wood'n stain or to be used as a glaze) -
Classic Black, Java, Black Walnut, Red Mahogany, White Wash, Charcoal, Dark Oak, Barnwood, Cherry, Weathered Wood, Old Oak, Pecan, Cedar, Dark Cherry

Directions -
1. Scrub with Dawn dish soap to remove any dirt, grime and grease. Wipe with water. Then wipe down with denatured alcohol mixed with water or with Krud Kutter®. Then wipe with water again
NEVER USE TSP PRODUCTS
(TSP will cause wood based coatings to not adhere properly)

2. Recommended but not necessary -
Quickly scuff sand with 220 grit sandpaper to "key" the surface then wipe down with a clean, damp (water) rag

3. Tape off all areas you need to paint around

4. Brush on 2 coats of Wood'n Primer allowing to dry for at least 2 hours between
coats.
Make final strokes long and in the direction you want the wood grain

5. (If you want a smooth finish you can skip this step. Your brush strokes will make a very subtle grain)
After the wood'n primer has dried for 2 hours, brush on a thin coat of Wood'n Stain™ in plank size sections
Pull the graining tool through each section while coat is still wet. Wipe off the graining tool after each section.

6. After the wood'n stain has dried, brush on a light coat of gel stain if desired.
The more coats, the darker it will be. If you like the color that is, you can skip the stain and move onto step 7.
Make final strokes long in the direction you want the grain
Reminder: Do not wipe back the stain like you would with other stains

7. Seal your interior projects with tripletique and exterior projects with Polytique

YouTube Tutorials -
https://youtu.be/6mwQCQnEU8s

https://youtu.be/fL0Gv428hzo

If you have any questions, feel free to reach out