Close

Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

Close
You don't have any treasuries yet. Enter a title below to create one.
Close

This item has been added.

View your treasury.

This item sold on May 22, 2013.

Like this item?

Add it to your favorites to revisit it later.
This listing is for a pair of Zorb II doublers.
Current microfleece colors available (from left to right): rust (first color) ONLY.
**All others gone**

Each doubler consists of 2 serged layers: microfleece + Zorb II
On average, the dimensions are approximately 15" x 5" but individual sizes vary, as I am (only slightly) imperfect.

These doublers are meant to be used on top of your cloth diaper system (flat, prefold, fitted, AIO, AI2, pocket), but may be used alone as well for less heavy wetters. The Zorb provides the thinnest, most efficient, absorbancy system currently available!

PLEASE READ THE FOLLOWING PARAGRAPH:
Zorb II has been pre-washed (pre-shrunk). The process is: I buy a bolt of the zorb, cut it into about 2 yard (more manageable) pieces, and wash them with liquid Tide detergent and dry on high heat. This is done 4 times and a shrinkage of about 35% occurs. Then I cut those pieces into their 15"x5" size before serging them with the microfleece (Microfleece does not require pre-treating). Even after this preparation, though, it's possible to have even more shrinkage with repeated use because there's even more surface area at the edges exposed to the high heat of drying. So the zorb may pull inward and your microfleece may sag. This does not affect the ultimate function of your doubler/booster.


ABOUT ZORB II (from Wazoodle's website):
* Zorb II™ the second generation absorbent fabric, and the latest innovation from Wazoodle Fabrics. Zorb II is a reversible fabric with a burable bamboo/cotton face. It can be used for a wide range of consumer, medical and institutional absorbent applications. The durable knitted face and back combined with a thirsty inner filling of Zorb material make it possible to make single layers prefolds, fitted diapers, soakers, change pads, and play mats. It's a Game Changer.
* Zorb II takes up moisture 20x faster than cotton, bamboo or hemp, and has a much greater holding capacity than any other product on the market. 1 layer of Zorb II will replace 2 layers of most microfiber terry and up to 4 layers of cotton or bamboo French terry.

ABOUT MICROFLEECE:
Microfleece is essential to any cloth-diapered baby's bottom. It lays soft against the baby's skin and wicks moisture away to prevent rashing and redness. When using, be sure the microfleece side is up (in contact with baby). Microfleece also has slightly water-repellant properties (not as repellant as regular fleece). You can test this by placing a few drops of water on its surface and watching it bead up and roll off. However, with slight pressure, the water will seep right through. So be sure your diaper is a good fit on the baby and the liner sits flush against baby's skin, otherwise the wetness will roll right off.

Thanks for shopping with "Made of Fleece"!

15% off / Zorb II cloth diaper doubler/booster & Microfleece stay-dry layer, One-size Pair

Overview

  • Handmade item
  • Materials: fleece, polyester, micro, microfleece, zorb
  • Feedback: 67 reviews
  • Ships from California, United States to select countries.
135