BLOCK rhinestone iron on hotfix transfer, Bling Letters, Hotfix Applique, Personalized rhinestone letters,custom bling words,bling numbers,

If wanting in a color, add 2 letters to the word when
ordering to cover the color cost.
$5.00 min order,
2.25 high BLOCK all caps.... Iron on Letters and numbers-all 10ss
2.25 X 2 APPROX SIZE OF EACH LETTER.
Please read the instruction below before ordering.
Shirt not included.
Enter the letters how you'd like them to appear:
We will send as the complete word OR each letter individually
We use clear but if you Need another color Message me!!!
Colors cost a tad bit more.

*****I have NO control over how fast the postal service gets your order to you.
If you need them quickly, please upgrade to priority mail.*******

Can be easily applied to fabric with a home iron.
Make sure there isn’t anything on the garments before ironing. Softener from washing or stickers from the store that left a glue residue

RHINESTONE PRESSING INSTRUCTIONS:
1. Preheat iron to cotton setting or 320 with a heat press.
2. Carefully remove transfer from cardboard packaging.
3. Peel off textured backing from the design (stones should stick to the clear plastic sheet). If any stones have shifted out of place, put them back in place using tweezers.
4. Place plastic sheet, stone side down on fabric and press into place with hand. The clear plastic sheet should stick to the fabric.
5. Place iron over design area and apply steady pressure for 15 seconds - DO NOT MOVE IRON AROUND AS STONES MAY SHIFT –
6. Turn Garment WRONG SIDE OUT and Place iron over design area for another 15 seconds and repeat.
7. Set aside and allow to cool for 3 to 5 minutes.
8. Turn fabric to right side out. Slowly and carefully peel the clear plastic sheet away from the fabric. If all stones are not sticking, you may re-iron on the opposite side of the fabric again.

Best Care: Wash inside out and air dry.

*****Wear To Start is NOT responsible for garments for any reason. Look over carefully prior to ironing. Make sure the back of the transfer is free of plastic or debris. Use tweezers to remove any unwanted materials that might have been missed from the transfer, or to put the rhinestone back in place if they moved from original location on the carrier.****