Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite your own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

Close
You don't have any treasuries yet. Enter a title below to create one.
Close

This item has been added.

View your treasury.

Like this item?

Add it to your favorites to revisit it later.
Premium quality stainless steel ID tags for collars, leashes, harnesses, and horse halters.

- 1/16" thick non-magnetic stainless steel
- contoured to fit your dog's neck
- GUARANTEED not to wear out
- will never jingle or get caught on things!

You can have anything engraved on them you want (up to five lines on large size tags - see character limits at the bottom).


Your choice of REMOVABLE (with notch) or SLIDE-ON (no notch)

REMOVABLE tags have a notch that allows you to work them onto an adjustable or martingale type collar. Despite the notch, they are extremely secure and are great for growing puppies and dogs with more than one collar.

SLIDE-ON tags are for belt-type (see below) collars or can be built into any collar or harness ordered from my shop, for the ultimate reassurance that as long as your dog is wearing a collar, he will also have identification.
- - 1x thick are for single-ply collars, leashes, harnesses, etc.
- - 2x thick are for extra thick items, leather collars, 2-ply webbing, horse halters, poly-vinyl coated collars, etc


*** Purchasing for an EXISTING COLLAR?? ***
Slide-on Tags ONLY work on belt-buckle type collars and horse halters!! The collar must have a free end to thread through the tag - a metal buckle at one end and holes punched in the other. If you have a collar with an adjustable plastic buckle or a martingale collar with no buckle, you MUST order a removable tag. ** NO REFUNDS or EXCHANGES if the wrong tag type is ordered** If you are unsure, just send me a message with a picture of your collar, if possible.


These tags, unlike "vending machine" tags, will not wear out after a few months! They are guaranteed to remain legible for the life of the pet they were purchased for. The engraving is deep and permanent!

**************************** S I Z E S ****************************
- Mini - for 3/8" (or 1/2") collars
- Small - for 5/8" collars
- Medium - for 3/4" collars
- Large - for 1" collars

* if you are looking for a tag for a 1.5" or 2" collar, please message me for a custom listing. 1" tags can be affixed to the front of wider collars if needed, however tags are NOT available in wider widths.

**************************** S H I P P I N G ***************************
Tags ordered alone will ship within 1-3 business days (M-F). Tags ordered with other items from my shop will ship together in approximately 5-10 business days. Shipping of tags available to USA and Canada ONLY. Due to ongoing delivery issues, tags ordered alone are not eligible for shipping to other countries.


**************************** TO ORDER ****************************
I will need the following information before your tag will be ordered/shipped:

1. Select appropriate size and type from both dropdown menus.
2. In the Note to Shop box during checkout, type EXACTLY what you want your tag to say.

Contact me with questions.


************************ F O R M A T T I N G ************************
When ordering, please include EXACTLY what you would like the tag to say. You can use a character count feature in Word or http://www.lettercount.com/ to check character maximums.

Engraving is in CAPITAL letters only.

Text is automatically CENTERED and automatically SIZED
(lines with fewer characters, like names, will be larger than lines with more characters).

The more text you put on the tag, the smaller the print will be. Fewer characters means larger text. Choose Wisely!

ZIP CODES or POSTAL CODES are NOT recommended - they are only useful for mail, and you can't mail a dog or cat! They take up precious space on your tag and make everything look crowded. Leave 'em off.

Information is copied & pasted directly to avoid typing errors, be *absolutely sure* all of your information is correct. NO returns/exchanges for tags that have incorrect information on them OR if you order the wrong size/type tag.

Available special characters:
. , : ' " ( ) - / ? + = & % $ # @ ! *


*************************** TEXT CAPACITY **************************

Spaces and punctuation count as characters! Try http://www.lettercount.com/ to double check each line.

for Small, Medium, & Large tags:

Line 1: 14 characters max
Line 2: 18 characters max
Line 3: 20 characters max
Line 4: 25 characters max
Line 5: 20 characters max

for MINI tags:
Line 1: 14 characters max
Line 2: 14 characters max
Line 3: 14 characters max
Line 4: 14 characters max


------------------------ Authentic Boomerang CollarTags™-------------------------


≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
OTHER SHAPES
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
Bone: https://www.etsy.com/listing/185498893
Round: https://www.etsy.com/listing/185499553
Heart: https://www.etsy.com/listing/185500057
Jingle-Free: https://www.etsy.com/listing/87618279

Frequently asked questions about FoxValleyDogCollars

Yes, with very few exceptions, all collars are adjustable. As a general rule, I make each collar or harness adjustable a few inches in either direction of the measurement you give me. For example, if your dog has a 15” neck, the collar you receive might adjust from 13” – 18”. Martingales usually start at or just below your measurement, so you have enough room to fit it over the dog's head.
A collar sized for a chihuahua will not be the same size as a collar for a St. Bernard. If I don't have a measurement, I can't know how big (or small) your dog is. See FAQ #1.
Measure your puppy’s neck (or girth, for a harness)– I will make the collar/harness using that number as the smallest adjustment, with only room to get larger so your puppy can wear the new collar/harness as long as possible. For example, a puppy with a 12” neck might receive a collar that adjusts from 12” – 17”.
All items are washable.
Hand or machine wash in cold water with like colors. A garment bag and mild detergent is recommended. NO bleach or fabric softener. Lay flat to dry.
Generic "cookie cutter" sizes are available. Including the dog's breed, age, build, and/or weight is also helpful. Not all collars follow the same sizes, so choose carefully.

Small: 9" - 12"
Medium: 10" - 15"
Large: 15" - 20"
Extra Large: 18" - 29"
It depends on many factors. Other brands of embroidered collars are not sized to fit your pet - they are one-size-fits-most, and as such, often lack in looks and quality. I refuse to do that. I have put together an entire document on this subject, complete with pictures, that you can view here: http://www.wags-n-woofs.com/CollarEmbroidery.pdf
Finally, see this listing for further details and pricing https://www.etsy.com/listing/163307070
Most items will ship within 1-2 weeks.
Orders are constructed in batches by color and not necessarily in the order they are received. In some cases I may construct and ship an item within a day or two of receiving the order, others take the full 2 weeks.
Rush Processing is available for an additional fee, but must be arranged IN ADVANCE of the order being placed.

Orders may be delayed or cancelled if size or other critical information is missing. I will make every effort to contact you; however the longer it takes to receive a response from the buyer, the longer the ship date will be delayed.
No. What I do for these cases is sew an extra piece of webbing to hold a 1" tag onto the front of the collar. This is secure and still streamlined.
ALL sales, conversations, payments, and transactions will be completed via Etsy or e-mail correspondence only. Fox Valley Dog Collars does not place or accept phone calls at this time.
Fox Valley Dog Collars does not currently offer wholesale purchases.

I will offer a quantity discount to private parties purchasing 10 items or more - this must be requested BEFORE the sale. I do not offer quantity discounts on orders of less than 10 items at this time.

Donations: If you have 501c3 you are welcome to submit a request for donated item(s). We ask for a short (250-500 words) essay of sorts telling us about your organization and what you would do with any donated products. Donation requests will not be considered without first meeting these requirements.
Requests can be emailed to info@foxvalleydogcollars.com

Thank you for your interest in Fox Valley Dog Collars!

Stainless Steel ID Tag - Jingle Free Pet Tag

US$9.95
Please select a size
Please select an option
Please select from the available options

Overview

  • Material: non magnetic stainless steel
  • Made to order
  • Ships from United States to select countries.
  • Feedback: 886 reviews
  • Favorited by: 368 people