Bourbon Barrel Head, Whiskey Barrel Lid, 20" Round, Whiskey Barrel Parts For DIY

Authentic bourbon barrel heads are uncleaned, not sanded, from the barrel to you! They are charred on the back but we do our best to scrape some of that off and contain in plastic wrapping, as some will fall off while in transit. Save on shipping & buy multiple! Only $6 shipping cost is added to each additional lid. We wrap these tightly in plastic to keep the lid together & safe while in transit!

These are about 21” in diameter, with a flat top surface of 19.5”-20” in diameter. Lids are held together with tongue and groove or dowels. We highly recommend you reinforce with glue and/or a backer. This will also help flatten them out and keep them flat for your use. Although they are plastic wrapped, don’t be alarmed if the lid isn’t together when you unwrap as you’ll be able to slide the tongue and groove or dowel back together. Some of these barrels (Heaven Hill, Willett & Wild Turkey) were used a second time for brewing beer, simply scrape and brush the char off the back & seal with a polyurethane. Jim Beam & Knob creek are direct from the distillery.

The logos of each distillery are shown in the images. They are all applied with a stamp at the distillery and no one looks the same (all depends how and where they stamp it on the lid) but all will be legible in the sense that you can read & tell what distillery, even if a letter or two are not fully clear.

Though all heads need some reinforcing, the “Rough/warped” option is a lid that is warped/dirty and will need extra work to clean up or can be taken apart and used for pieces.

*To keep shipping rates lower for you, we ship with UPS, and therefore cannot ship to PO Boxes. If a PO Box is the only way, please message us and we will calculate the additional shipping cost.