FREE SHIPPING--Curved french Curtain rod, Wrought iron, all hand hammered. Window treatments. 3/4" diam.

----FREE SHIPPING ---- USA and Canada only.  
-----------------------------------------------------
Model name: curtain curved french rod
-----------------------------------------------------
VERY IMPORTANT NOTE:
+Please write your PHONE NUMBER in the message box when ordering, it is needed for shipping.
+You could specify in the commentary the exact length you need to be cut. When is not specified we will send you the longer measurements listed.
For example: if you need 32" then order 24" to 36" and make a note that you need 32". 
The measurement is from CENTER TO CENTER of the rod.
The rod is 3" from wall to center of the rod.
--------------------------------------------------------
SET OF CURTAIN ROD WITH BRACKETS in real wrought iron made by an experienced blacksmith.
The set includes:
 -One curtain rod of 3/4" diam. All hot hammered textured
     -Two brackets
     - Middle bracket when is necessary because of the length.
     
Note: depending on the length, the rods are coming in two or three bars (for the very long one) screwable together.  See videos no 1 and 2 at https://forgespellidesign.wixsite.com/product-info/curtain-rod-infos

------------------------------------------------------------------
MORE INFOS: 

Follow this link to find more info about this product: https://forgespellidesign.wixsite.com/product-info/curtain-rod-infos

These rods can support a heavy curtain. Look at video no. 3.

Also, you will find more about how to calculate your curtain rods on my Pinterest page: www.pinterest.ca/forgespellidesi/how-to-measure-curtain-and-rods/

DESIGN AND PROCESS: 
These CURTAIN RODS are entirely hand-hammered by an experimented blacksmith with ancestral and modern techniques.

MATERIAL: 
These curtain rods are made with 3/4" round steel hot hammered. 
Screws are included. 

FINISH:
Many finishes are offered. For more Infos refer to the FAQ on our internet site at: https://forgespellidesign.wixsite.com/product-info/finish-and-faux-finis

CONTROL of QUALITY:
Each object is made by a blacksmith with over thirty years of experience. He makes sure that the order is respected and practices a STRICT CONTROL OF QUALITY. The square had a tolerance of fewer than 0,5 degrees. Usually, the dimension is close to the dimension shown, but it could be more or less than 1/2'' because of the forging process in the length and the height.---
---

IMPORTANT NOTICE – U.S. Customs & Tariffs
!!! GOOD NEWS. !!!! OUR PRODUCT ARE TARIFF-EXEMPT under the USMCA free trade agreement — signed by President Trump himself in 2020.
However, because our items contain steel, a Section 232 steel tariff of approximately $16 USD per item applies and will be collected by CARRIER upon delivery. This is beyond our control.
We apologize for any inconvenience and truly appreciate your understanding.