Poi Knobs [ LED & Basic ]

Sold Individually

Washers available upon request - Washer style is dependent upon rope diameter and knob.

Overall length = measures entire poi tip-to-tip (including the knobs and heads). We recommend measuring from center of palm to arm pit. Most spinners choose 18" to 28".. If we do not receive a length, they will be set to 24”. We finish the knobs off permanently through melting or crimping, unless requested otherwise.

Standard washer count per knob: 2
- Pomgrip, Ovo, Flex Standard & Delphin washers weigh: 3 grams each
- Flex XL & TORQ Washers weigh: 4 grams each

Bearings available in TORQ, Flex XL, Flex, PomGrip, Px3 +$10 per poi

Swivels upon request (See Photos): + $15 per poi
- Upgrade here: https://etsy.me/2OPrGZA
- In-line swivels: 2.75” of cord separating swivel from knob. In-line is our standard if not specified.
- In-set swivels: Swivel inset into knob (tend to pinch your finger depending upon grip-style
- Bill Fisher KROK #7 Ball Bearing Swivels
- We either splice the cord up through itself to create a single strand or on thicker tethers we use heat-shrink tube and glue.

Knob options (See Photos for color references):

—> TORQ
- Weight: 7 grams
- Height: 22mm // Width: 37.5mm
- 3D Printed in Maine, designed by FoF

—> TEX-TORQ
- same as the TORQ but has a grippy finish.

—> Tex-Flex:
- 7 grams
- 34mm Diameter x 23mm Tall
- 3D Printed in Maine
- Has a grippy finish

—>Flex XL:
- 10 grams
- 42mm Diameter x 28mm Tall
- 3D Printed in Maine

—> TEX-Flex XL
- Same as Flex XL but with a grippy finish.

—> PomGrip 2.0 by LanternSmith
- Weight: 16g 33g with max washers.
- Diameter: 35mm // Height: 25mm
- Half sphere shape. Squishy
- Grippy

—>Ovo Knob by LanternSmith
- 27g (empty), capable of 60g with full with washers
- Diameter: 35mm // Height: 48mm
- Grippy

—> Sphere knobs by FoF
- Weight = 30g
- Diameter: 37mm
- Firm rubber-silicone

—> Delphin Knob
- Weight: 5 grams
- Diameter: 34mm // Height: 23mm
- Comparable in size to Flex standard knob
- Firm foam-like material - Not slippery when wet

—> Px3 Knob
- Weight: 10g
- Diameter: 33mm // Height: 22mm
- Small grip
- Thermoplastic Rubber, Pastels are hard

—>Flip
- Weight: 13g
- Diameter: 35mm // Height: 25mm
- Comparable in shape to Flex Standard
- Rubber-like firm material
- Changes texture with introduction to hand oils and becomes Grippy

—> Blank Ultraknob (NO LED)
- Weight: 20g
- Diameter: 38 mm // Height: 28mm


LED Knob Series:

Knobs by Flow on FIre

—> LED TORQ (Glow in the dark)
- Also available in Tex finish
- Uses rechargeable DOT XL Pro chips by UltraPoi
- 3D Printed in Maine, designed by FoF
- Weigh with chip and crimpt: 16 grams (0 washers fit)
- Height: 22mm // Width: 37.5mm

—> LED Flex XL (Glow in the dark)
- Also available in Tex finish
- Uses rechargeable DOT XL Pro chips by UltraPoi
- 3D Printed in Maine, designed by FoF
- Diameter: 42mm // 29mm Tall
- Weigh (with chip and crimpt: 20 grams
- Holds 2 washers max (10 grams total)
- Max weight 30 grams

—> LED Sphere Knob
- Weight with chip & crimp: 37 grams
- Diameter: 37mm
- Firm rubber-silicone
- Uses the same insert as TORQ and FLEX series