*** Please read full description ***

****Please note that these inserts fit the Altoids SMALLS Tins and do not fit the regular (full-size) Altoids Tins****

Up for sale is my ground up 3D printed Seven Star Altoid tin insert for the Altoids Smalls Tins. Can be used for whatever your heart desires.

Made with a Silver PLA plastic here in my workshop in the USA.

The choices for this item is a 3 slot, 4 slot, 7 slot(w/ days of the week in each slot) and 8 slot organizer with most (see below) openings having a radiused front ramp for easier retrieving of your items. (the bottom of the organizer is not completely open as the ramp goes from the vertical wall and curves down towards the bottom of the organizer, see last photo)

The front opening of the 3 slot and 4 slot do not have the ramped front edge. The 7 and 8 slot have all openings radiused.

***These require quite a bit of effort to get them seated properly. On a firm surface place one edge of the insert under the lip of the tin and as far against the wall of the tin as possible and then give it a firm smack on the side sticking up to get the insert to go under the rim of the tin. Any questions send me a message.***

Not designed to be removed as they fit just inside the rim.

If you would like a custom color, quantity or customization please send me a message and let's work something out. Thanks!

**** Due to the nature of PLA plastic, care should be taken to not allow the plastic to exceed 120 degrees F as it will begin to soften and warp. Items are built in an enclosed printer with ambient temp around 100 degrees F and while this plastic is stable for most if not all household uses it needs to be kept away from extended direct sunlight or being left in a hot vehicle as temps can easily exceed the 120 degree F threshold ****