Make matching earrings to go with your round pendant necklaces! These earring studs are made of brass and silver plated. They are Nickle Free! Comes with round glass domes. You're ready to make some earrings.

Earrings: 12mm
Glass Domes: 12mm

Don't forget the Diamond Glaze!

GLASS PENDANT TUTORIAL

When choosing your image you can use scrapbook paper, images on collage sheets, photos, and artwork as your image. If you are printing up your image you should use card stock for best results. You can use glossy photo paper as well, but you will need Microglaze

STEP 2: If you are printing from and ink jet printer you will need to seal your image with Microglaze. You will also need this sealer for glossy photo paper. This prevents your image from smearing and blurring from the Diamond Glaze. If you use Microglaze, apply a thin coat and allow to dry for about an hour.

STEP 3: Apply the Diamond Glaze to the back of the glass and spread it around. Pop any bubbles you see in the glaze. DO NOT SHAKE THE BOTTLE. Then, adhere the glass to your image. Do not press firmly. Just lay the glass over the image and press lightly allowing it float and make sure the glue has spread to the edge of the glass. Allow to dry for about 1hr.

STEP 4: Trim the paper around the edge of the glass. Turn pendant over and seal the back of pendant with Diamond Glaze. Allow to dry for about 1hr. If using bails, adhere the bail to the back of the pendant with super glue or E6000. Allow to dry.

*INSERTING PENDANT TO TRAY

Once, pendant has dried, apply a small dollop of glaze into the tray and adhere pendant into tray.