Make turning on the lights fun! This triple-gang design controls three separate lights. It features a sillcock (garden hose knob) that you push in and turn in order to dim or brighten your lights. It also features two gears with levers that turn toggle switches off and on (toggles are the kind you flick up and down with your finger).

My design fits most switches in the USA by fitting over the existing wall switch. PLEASE NOTE, UNLIKE MY OTHER LIGHT SWITCH COVERS, THESE DIMMERS REQUIRE SOME ELECTRICAL WIRING IN ORDER TO INSTALL THEM. Your order comes complete with the electrical components that you need already attached. I recommend that you have a qualified electrician install the dimmer switch.

The dimmer switches are rated for 150W LED, 150 CFL, 600W Incandescent and 120 AC, 60Hz. They are single pole Rotary Dimmers.

If you also require toggle switches, please let me know and I can include some at no extra cost.

My lever system has a bolt and nut design that allows you to adjust the amount of torque required to pull the levers up and down. A small matching steel wrench is included with your purchase to help you adjust the tension in the bolts. It also comes with a steel spacer plate, which ensures a tight seal against the wall and prevents wobbling and unsightly gaps between the switch and the wall.

When installing, a good option is to invert your existing toggle switch (turn it upside down) so that the on/off, up/down action of the levers is not reversed.

The base plate measures 6 ¼ inches long by 4.75 inches tall. The levers extend 4 ¼ inches from the wall.

Made in the USA from CNC plasma cut 1/4 inch steel plates.Please allow 3-5 business days before items ship. Custom orders or very large orders may take longer. I accept returns of this item. However, a 20% restocking fee will apply.