HighlandHardware

Acrylic Frames

Salt Lake, Utah On Etsy since 2013

HighlandHardware

Acrylic Frames

Salt Lake, Utah | 2,885 Sales

Announcement    39"x39" is the largest size we are able to make and ship safely, if you have artwork larger than will fit this size then we recommend purchasing the bolts and having acrylic cut locally to fit the size you need

Small bolts work great on acrylic smaller than 30", and Large bolts are recommended for acrylic over 30" and do not have a size limit but for very large pieces you will want to have a bolt about every 30-36" around the perimeter.

1/8" thick acrylic is recommended for most pieces, but you can also use 1/4" for the front or back or both with large pieces for added stability. Frame kits can be used with glass or acrylic.

Holes for the small kit should be 3/8" and holes for the large kit should be 7/16".

When hung, it is possible to have a small gap between the two acrylic sheets. This is caused when the bolts are drilled into the wall slightly off from the holes in the acrylic. Replacements will not be provided for this problem, as it happens due to user error.

Brass kits are made from solid unlaquered brass and have natural marks and patina, and will continue to patina with age, as is the nature of brass.

Please convo me if you have any other questions!

Announcement

Last updated on May 24, 2017

39"x39" is the largest size we are able to make and ship safely, if you have artwork larger than will fit this size then we recommend purchasing the bolts and having acrylic cut locally to fit the size you need

Small bolts work great on acrylic smaller than 30", and Large bolts are recommended for acrylic over 30" and do not have a size limit but for very large pieces you will want to have a bolt about every 30-36" around the perimeter.

1/8" thick acrylic is recommended for most pieces, but you can also use 1/4" for the front or back or both with large pieces for added stability. Frame kits can be used with glass or acrylic.

Holes for the small kit should be 3/8" and holes for the large kit should be 7/16".

When hung, it is possible to have a small gap between the two acrylic sheets. This is caused when the bolts are drilled into the wall slightly off from the holes in the acrylic. Replacements will not be provided for this problem, as it happens due to user error.

Brass kits are made from solid unlaquered brass and have natural marks and patina, and will continue to patina with age, as is the nature of brass.

Please convo me if you have any other questions!

Items

 
highlandhardware

Contact shop owner

highlandhardware

Reviews

Average item review
5 out of 5 stars
(238)
See reviews that mention:
quality 33 shipping 34 customer service 28

About HighlandHardware

Sales 2,885
On Etsy since 2013

Shop policies

More information

Last updated on Dec 14, 2016
Frequently asked questions
What size should I order?

We recommend having a 2-3" border around the entire piece. This ends up adding 4-6 inches to your frame size, since the 2-3 inches need to go on the left and right of the print.
For example, if you have an 11x14 print, you'd need around a 16x19 frame (for a 2.5" border)

What should I do if I need a frame larger than 30"?

Currently, we can only ship up to 30" frames. Come mid-January we'll be able to ship up to 39" frames. But don't worry!! If you need a frame larger than this, you can contact a local glass or plastic shop and still purchase the bolts from us. Send us a message and we can help you with all the measurements you'll need!

How can I clean my acrylic?

Just use a rag, a little dish soap and water. This works better than Windex.