2kg Soy container Wax Kerasoy 4130,100% natural eco soy plant wax pellets,container candle making craft,small business,compostable packaging

KERASOY CONTAINER BLEND WAX 4130

This wax is 100% natural soy wax pellets, for container candles
Kerasoy container is an eco soy plant product suitable for vegans
used for candle making craft and small business
various sizes available.

WHO IS IT FOR

This wax is the uk’s number 1 favourite suitable for beginners and advance users.

WHAT IS IT FOR

Excellent for container candles.

WHAT IS THIS

KeraSoy Container Wax is a blend specifically developed for the production of container candles. It is suitable for further blending with fragrances and oil soluble dyestuffs. KeraSoy Container blend is biodegradable and vegan friendly. No animal products are used and no animal testing has been carried out in its manufacture. KeraSoy Container Wax does not require additives, other than fragrance and colour required by the Candle maker. Old or partial candles may be remelted and the wax reused although it is advisable not to heat the wax above 85°C or heating for extended lengths of time. Waxes should be stored in a cool, dry location away from direct heat, sunlight and moisture.

HOW TO USE

Congealing Point: 34°C
Viscosity @ 100°C, cSt: 9.7
Penetration @ 25°C, dmm: 60
Melting Point: 45.5°C
Colour: Off White to Pale Cream
Typical Use: Container
Recommended Wick: Wedo Eco Wick

SEE BELOW FOR TIPS AND GUIDANCE ON HOW TO USE KERASOY CONTAINER BLEND WAX.

CONTAINERS
Containers should be clean and free of contaminants. Containers should be at least at room temperature, although pre-heating the containers to approx. 45 - 50°C can be beneficial.

COLOUR
Most dyes work with KeraSoy Container; powder, liquid, chips, blocks, etc. When using powder dyes, heat the wax to approx. 75°C, add the dye and mix until dissolved. Powder dyes may also be dissolved in fragrance and then added to the melted wax, be sure the dye has dissolved completely before adding. When using powder dyes dissolved in fragrance, liquid dyes, colour blocks, chips or no dye heat the wax to 70°C. If you wish to make your candle darker or “richer”, add a little black dye to the colour you are using.

FRAGRANCE
KeraSoy Container may be used with fragrance at levels up to 10-12%, however fragrance which is specifically developed for use with natural waxes is highly recommended. Burn pool size and depth greatly affect fragrance throw so correct wicking is paramount. Some fragrances may react poorly with the wax causing bleeding, objectionable surface finishes or poor flame quality. This has been found to be exaggerated when using fragrances specifically designed for use in Paraffin wax candles.

WICKING
Natural waxes tend to require larger wick sizes than traditional paraffin waxes. Fragrance, colour and candle configuration have a great impact on the best wick choice. Too large of a wick may cause sooting, accelerated burn times and guttering (wax leaking through the side of the candle). Too small a wick will cause tunnelling and produce a smaller flame. Keep wicks trimmed to ¼ inch. If you experience poor flame quality or stability, try a different type of wick. Test burning should be done after the candle has had a chance to sit for 48 hours after pouring.

MELTING
Temporary high temperatures (up to 90°C) have no adverse effect as long as the wax is cooled back down quickly. Higher temperatures may cause the wax to discolour. Allow the wax to cool to your desired pour temperature, add the fragrance and mix well. Be sure to stir/mix the wax while melting. Avoid using containers containing copper and zinc as this may accelerate discolouration. Stainless Steel is the material of choice although mild steel is acceptable. Digital temperature probes are readily available and are a safer choice than the traditional Mercury in glass type.

POURING
Pour temperatures may vary according to mould type & size, fragrance & dye used and the effects the candle maker wishes to achieve. Greater adhesion to containers can be achieved by pouring at temperature close to congealing point (approximately 45 - 55°C). Fragrance should be added and mixed immediately prior to pouring where practical. If you experience difficulties with your pour temperature, try a lower or higher temperature in increments of 5 - 10°C. Consider pouring into pre heated moulds for better adhesion to glass containers.

DOUBLE-POUR
KeraSoy Container is formulated to require only a single pour in most containers however, for some large containers; a top-up is required to achieve the best candle surface. A small amount of wax at a slightly warmer temperature than the candle was poured at can be used to top-up the candle before the candle is fully cool (pouring the top-up once the candle is completely cool may result in a reduction of adhesion to the container).

CANDLE COOLING
Cool undisturbed candles at room temperature (about 25°C). Candles should be allowed to sit undisturbed for 48 hours before test burning.

TEST BURN
Check wicking. Test burn the candle for burn pool diameter and “mushrooming” after it has cooled for 48 hours. Mushrooming is when carbon and/or other substances build up on the end of the wick interfering with combustion. Mushrooming can cause sooting and poor odours. Try different wicks until you have your desired burn pool diameter and a good clean flame.

WHO IS THE MANUFACTURER

Soy container candle wax developed and manufactured in the UK by Kerax. KeraSoy waxes have been designed to produce candles with a premium quality finish, excellent scent throw and superb glass adhesion.

PACKAGING
Is compostable brown paper bags posted in recyclable boxes,
Keeping the environment in mind.

AVAILABLE SIZES

250g, 500g
1kg, 2kg.

UNFORTUNATELY WHOLESALE ISN’T AVAILABLE FOR THIS PRODUCT JUST NOW.

USUALLY DISPATCHED WITHIN 24HRS

DELIVERY IS
48hrs Royal Mail standard tracked.

NEXT DAY DELIVERY IS
Via Evri.

INTERNATIONAL SHIPPING IS USUALLY
DPD And should take between 5-7 working days.

Also available is Kerasoy pillar blend perfect for wax melts and pillar candles
Please see link below 👇

https://etsy.me/3MDPfj1

For more container wax
Check out the link below 👇

https://etsy.me/3sOSQTr