Glass decals are not suitable to be soaked in water or used in the dishwasher, to ensure longer life please hand wash and dry.

Turn your iron on to hot,

steam mode off

Place in the area u want to iron

Apply pressure

Iron over for 15-20 seconds gently peeling back the film to see if adhered.

if not keep going over it 5 seconds at a time until it adheres and you can peel the film back successfully leaving the text on the garment, iron inside out for extra bonding.

Allows the iron to cool and repeat the process for each item.


There is no need to use anything over the film otherwise the iron on won’t get enough heat

Turn your iron on to hot,

steam mode off

Place in the area u want to iron

Apply pressure

Iron over for 15-20 seconds gently peeling back the film to see if adhered.

If adhered please allow to cool before removing film

if not keep going over it 5 seconds at a time until it adheres and you can peel the film back successfully leaving the text on the garment, iron inside out for extra bonding.

Allow the iron to cool and repeat the process for each item.


There is no need to use anything over the film otherwise the iron on won’t get enough heat

Application instructions -:

Rub over the lettering and edges well , separate the film from the backing paper ensuring the lettering is on the film ...

Place in desired area rub well again and gently slide the film back pressing the lettering as you go

We only accept cancellations within 24 hours of placing a order…

Dispatch times are stated on all items and are also available on the order confirmation email.