Oi! You can't buy your own item.

Wire Jewelry Tutorial, Learn to Make a Copper Necklace, Downloadable PDF

Instant download

Description

Wire Jewelry Tutorial.

Learn to make this pretty Elven copper wire wrap necklace with amazonite, Chinese Jade and aventurine beads. This delicate design features contrasting colours of watery greens with polished coppery tones. The style is inspired by the depths of the night, when moonlight baths woodland fern with soft muted rays of light. This jewellery tutorial will take you step by step through the complete making process. Every step is described and photographed from the preparation of the copper wire, through to the final varnish.

Customer Review: “WOW….this is the most well written wire wrap tutorial I have ever purchased (and I have purchased a lot)…..Would love to see more from this talented artist.” Received 1 April 2016.

How the instant download works: This tutorial is in a .PDF format. You will need a .PDF reader to enable viewing of the file. Please check prior to purchase that your computer or device can open/read .pdf files. Once payment has been received, you will receive an email with a link to the downloadable file.

Level: This tutorial is suitable for beginner / improver makers with a little experience of copper wire work.

File Size: 17.3 MB.

Number of Pages: 56.

Number of Photographs: 158 high quality studio lit.

Materials Needed: Raw copper wire, measuring tape, beads, fine brass chain, open jump rings, lobster clasp, extension chain, wire wool, liver of sulphur solution, gloss coating.

Tools Needed: Nylon jaw wire straightening pliers, bail making pliers 10mm and 16mm, large and small metal files, large and medium metal or wooden mandrel, mandrel props, wire cutters, flat nose pliers, long nose pliers, round nose pliers, bench block, domed jewellers hammer, nylon hammer, glass/ceramic container, tweezers, disposable gloves, safety goggles, jewellers polishing cloth, kitchen towel, foil, sponge brush.

Note: This product is for the purchase of an e-book tutorial only, as an educational guide. The purchase does not include any printed paper, craft materials or tools. Nor a finished product.

Author and Designer: Nicola of Earth Balance Craft

------------------------------------------------------------------------------------------------------------------

COPYRIGHT NOTICE: This Ebook, the contents and the product design are copyright of “www.earthbalance-craft.co.uk and Earth Balance Craft”. Any redistribution or reproduction of part or all of the contents in any form is prohibited. This tutorial and the product design are for personal use only and must not to be reproduced for any educational or commercial purposes. © 2016 www.earthbalance-craft.co.uk All Rights Reserved.

------------------------------------------------------------------------------------------------------------------

Disclaimer: This tutorial is written in English, for English readers only. The instructions use the UK metric system of measurement in CM. There is a conversion guide at the beginning advising on measurements in inches for USA/Imperial.

NB: All purchases of tutorials from Earth Balance Craft are final. Please review the shop policies with any questions you may have.
Wire Jewelry Tutorial.

Learn to make this pretty Elven copper wire wrap necklace with amazonite, Chinese Jade and aventurine beads. This delicate design features contrasting colours of watery greens with polished coppery tones. The style is inspired by the depths of the night, when moonlight baths woodland fern with soft muted rays of light. This jewellery tutorial will take you step by step through the complete making process. Every step is described and photographed from the preparation of the copper wire, through to the final varnish.

Customer Review: “WOW….this is the most well written wire wrap tutorial I have ever purchased (and I have purchased a lot)…..Would love to see more from this talented artist.” Received 1 April 2016.

How the instant download works: This tutorial is in a .PDF format. You will need a .PDF reader to enable viewing of the file. Please check prior to purchase that your computer or device can open/read .pdf files. Once payment has been received, you will receive an email with a link to the downloadable file.

Level: This tutorial is suitable for beginner / improver makers with a little experience of copper wire work.

File Size: 17.3 MB.

Number of Pages: 56.

Number of Photographs: 158 high quality studio lit.

Materials Needed: Raw copper wire, measuring tape, beads, fine brass chain, open jump rings, lobster clasp, extension chain, wire wool, liver of sulphur solution, gloss coating.

Tools Needed: Nylon jaw wire straightening pliers, bail making pliers 10mm and 16mm, large and small metal files, large and medium metal or wooden mandrel, mandrel props, wire cutters, flat nose pliers, long nose pliers, round nose pliers, bench block, domed jewellers hammer, nylon hammer, glass/ceramic container, tweezers, disposable gloves, safety goggles, jewellers polishing cloth, kitchen towel, foil, sponge brush.

Note: This product is for the purchase of an e-book tutorial only, as an educational guide. The purchase does not include any printed paper, craft materials or tools. Nor a finished product.

Author and Designer: Nicola of Earth Balance Craft

------------------------------------------------------------------------------------------------------------------

COPYRIGHT NOTICE: This Ebook, the contents and the product design are copyright of “www.earthbalance-craft.co.uk and Earth Balance Craft”. Any redistribution or reproduction of part or all of the contents in any form is prohibited. This tutorial and the product design are for personal use only and must not to be reproduced for any educational or commercial purposes. © 2016 www.earthbalance-craft.co.uk All Rights Reserved.

------------------------------------------------------------------------------------------------------------------

Disclaimer: This tutorial is written in English, for English readers only. The instructions use the UK metric system of measurement in CM. There is a conversion guide at the beginning advising on measurements in inches for USA/Imperial.

NB: All purchases of tutorials from Earth Balance Craft are final. Please review the shop policies with any questions you may have.

Reviews

5 out of 5 stars
(335)

Downloads

File delivery
Your files will be available to download once payment is confirmed. Here's how.

Payments

Secure options
  • Visa
  • Mastercard
  • American Express
  • Discover
  • Paypal
  • Gift cardAccepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
Earth Balance Craft accepts payments via PayPal, bank transfer and Etsy giftcard. If you wish to pay via debit or credit card, It is possible to use Paypal without a Paypal account.

If paying by Paypal, please take a moment to double check that your Paypal shipping address details are up to date. We are obliged to ship to the address that is stored within Paypal as per the Paypal customer protection policy. If you need to amend an address after a transaction has taken place, the order will be cancelled and refunded.

Returns & exchanges

I gladly accept returns and cancellations

Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery
Request a cancellation within: 3 days of purchase

I don't accept exchanges

But please contact me if you have any problems with your order.

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalised orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Returns and exchange details

We want everyone to be a happy customer, so we aim to be as clear and simple as possible with our returns policy.

1. CONTACT us within 14 days from date of posting to arrange the return.
2. POST the item back to us within 30 days (counting from the date you received the item).
3. REFUND will be arranged once the item has been received and inspected (see notes below).

Please post the item back in the original condition/packaging. The returned item must be in the same condition as it was sent out, unused, intact and clean. Any items received that have been used/damaged will not be refunded/exchanged.

Exchanges are only valid when changing size of a bracelet/bangle purchase.

Postage and packaging costs are the responsibility of the buyer and are not refunded. Once the item has been received, a refund of the item cost alone will be made. For exchanges in jewellery sizes, the return postage will be invoiced to the buyer on receipt of the return.

Please ensure your return package is sent via recorded/signed for delivery as we cannot give refunds when a return package has gone missing in the post.

For exchanges in jewellery sizes if the design is not currently in stock, please allow 2-3 weeks for a new piece to be made.

Once received please allow 5 working days for a refund to be made. Thank you.

We do not accept returns on the basis of metal allergies, all materials will be clearly stated in the description. Please take care to read the full details before purchase. Please note that some items are exempt from the returns policy, it is not possible to return/refund the following items:

- Earrings for reasons of hygiene.
- Personalised pieces.
- Pieces made with a non-standard size or length.
- Commission/custom pieces.

Additional policies

** BUSINESS HOURS **

If you have any questions please contact Nicola via the Etsy convo system. Business hours are Monday to Friday 9am to 5pm, UK timezone. Messages will be responded to within 1 working day. Any messages received after 5pm on Friday evening will be responded to on Monday.

** DIGITAL DOWNLOAD TERMS **

Once payment has been received, you will receive an email with a link to the downloadable file. Our tutorials are in a .PDF format. You will need a .PDF reader to enable viewing of the file. Please check prior to purchase that your computer or device can open/read .pdf files.

Our downloadable tutorials do not include any printed paper, craft materials or tools, nor a finished product.

Copyright: All Ebook content is copyright of “www.earthbalance-craft.co.uk and Earth Balance Craft”. Any redistribution or reproduction of part or all of the contents in any form is prohibited. This tutorials are for personal use only and are not to be reproduced for any educational or commercial purposes. © 2010-2018 www.earthbalance-craft.co.uk All Rights Reserved.

Our tutorials are written in English, for English readers only. Our tutorials use the UK metric system of measurement. All purchases of tutorials from Earth Balance Craft are final.

** PLEASE NOTE **

All items are unsuitable for children.

** INCORRECT SIZING **

We cannot be held responsible for incorrect bangle/ bracelet/ necklace / pendant sizes provided by you. Please note that re-sizing and alterations may be possible but will incur an extra charge.

** COLOUR VARIATION **

The colours are represented as naturally as possible in the images, but please be aware of the limitations of digital imagery and colour. Different computer screens can display the same image in a very different way.

There can be a difference between the monitor screens the product photographs are being viewed on. Everyone's monitor is set up differently i.e. contrast, brightness, saturation unless you are using a professionally calibrated screen. Our computer has been calibrated for professional photographic use. Using a calibrated work flow means whatever is on the monitor is calibrated to be true to life. In our Etsy store, this applies to the product photographs.

In most home scenarios the brightness is too high and the colours are overly colourful (saturated). This is where colour miss match can occur, because the viewer is seeing something that wasn't true in the first place. Please bear in mind that even two identical monitor models out of the factory will never look the same until calibrated.

** COPPER AFTER CARE GUIDE **

Product TLC: Please take care of your wire work product, each piece has been hand-made with simple construction using natural materials that have as little plastic and chemicals as possible. Each piece will stand up to normal everyday use as the soft copper metal has been work-hardened, however if you handle it roughly it will get squashed. I use the highest quality liquid metal varnish that has a durable glossy finish.
All metal varnishes are semi-permanent, the finish will degrade over time through oxidisation developing a dark patina. For longevity please avoid contact with water, oil based products, solvents, hairspray, alcohol and perfume which will prematurely degrade the varnish. To dust my wire work designs, please do not spray with any type of furniture or cleaning polish. Dust with a clean cloth or duster. If in time the copper becomes dull, you can restore the glossy shine with a jewellers polishing cloth or with extra fine grade wire wool. The copper can then be resealed with a metal varnish, you are welcome to contact designer Nicola who offers a 'copper re-sealing service'.

Out in the Garden: My suncatchers, hanging decorations and plant pot ornaments unless stated in the description can be placed indoors or outdoors in good weather. With a caveat to please be aware that when my designs are used outdoors, the metal varnish used will degrade quicker when exposed to the external environment e.g. water/humidity. The more moisture and salt content in the air, the quicker this process happens. Any metal alloy components will rust over time and may fail e.g. crimp beads. When copper is exposed to the elements, the raw copper metal reacts with the air causing patina to form over the surface of the piece, this can be dark brown, black and green colours, even forming rust in some cases. The longevity of the varnish out in the elements depends on the moisture/salt content in the air where you live. Copper as a metal that reacts in the air is always in a state of flux. The varnish I use is the highest quality liquid metal varnish available on the market used in yachting applications sealing metal masts which are exposed to all weathers. My designs can be polished to a high shine finish once again with a jeweller's polishing cloth, or by rubbing over with a very fine grade of wire wool, then to be resealed with a liquid metal gloss varnish from any hardware store. All metal varnishes used on copper will only ever be semi-permanent and will degrade in time over the years due to the oxidisation in the external environment. I do not recommend placing my designs out in the winter time or in bad weather like wind/hail/snow and when the temperature drops below freezing as some glass/gemstone beads will crack under extreme temperatures. Take care of your designs and they will last a very long time.

Hanging Mobiles: Please note my hanging mobiles are only suitable for hanging inside the home due to the delicate nature of the droplets. They are not suitable for garden / exterior use. When using as a baby mobile or in a child’s room, please remember that this product is not a toy or suitable for handling by babies/children. Please ensure the mobile is hung from the ceiling or high on the wall out of reach.

Oxidised Copper Jewellery: All of my copper jewellery designs (necklaces, pendants, bracelets, earrings) are hand-painted with a gloss varnish that is safe to wear on the skin. Even with a varnish coating, copper jewellery can cause your skin to discolour with a green or blue colour. This is a natural harmless reaction called ‘oxidisation’ when oxygen and your body’s natural oils combine to create a layer of copper carbonate on top of your skin. Most likely found when wearing rings and bracelets that fit snugly against your body causing you to sweat between the copper and skin. This is not a copper allergy, as it is rare to be allergic to copper due to its anti-microbial properties. A tip to avoid the discolouration is to keep your jewellery piece clean and to remove the piece when asleep. The double varnish layer I apply reduces down the likelihood of this reaction. Any coating used for copper metal is only semi-permanent and will degrade over time. With regular perfume or solvent use e.g. hairspray, whilst wearing my jewellery designs, this will degrade the varnish which will cause the piece to begin the natural darkening process (patina). A jewellers polishing cloth can be used to restore the shine.

Copper Plated Jewellery: Please note that all of my jewellery chains and findings such as clasps, jump rings and extension chains are copper plated (unless stated). Any metal alloy is lead and nickel free compliant with EU regulations. Please be aware that any copper plated components will tarnish over time with wear. There are ways you can extend the lifetime of your piece. Avoid contact with perfume, soap, cleanser, moisturiser, make-up, cream, nail polish, hair spray, moisture, oil, water and chlorine. Avoid wearing when exercising or swimming. The sweat and natural oils in your skin will also react with the copper plating over time, degrading the finish and tarnishing the piece to a dull dark colour. Do not use a jewellers polishing cloth on any copper plated components to restore the finish as this will rub away the plating. To buff use a lint free cloth or a soft jewellers cloth. Store your piece in a container where only copper plated jewellery has been kept as other metal alloys will cause tarnishing / metal reactions.

Hand Stamped Copper Bookmarks: A variety of my designs use the traditional method of hand-stamping onto copper sheet, often seen in my bookmarks and decorations. Each letter is hand-stamped with a wonky rustic appearance, to be imperfect and whimsical. There will be differences in each creation with the text alignment, spacing and position. It is also important to note that hand stamping onto copper sheet causes the rear side to buckle slightly from the metal being ‘chased’ on the front side, without any copper being removed. The indentation on the front is darkened to ‘pop’ the lettering and numbers. As with all of my designs, the copper sheet is sealed with a gloss varnish to retain the highlights.

Raw Copper Bangles: These bracelets are not treated with a varnish or lacquer. This means the copper will tarnish and patina over time and will be prone to fingermarks. Mix a solution with warm water and a few drops of fresh lemon or lime juice, with one teaspoon of salt, mixing it thoroughly together. Place the copper cuff into the solution and leave for about five minutes. When the time is done, rinse in water and if needed you can repeat the process. Alternatively use a jewellers polishing cloth to restore the sheen.

Raw Copper Necklace: As the pure copper metal of the feature and the chain is untreated, it will form a natural dark/dull patina over time and will also be prone to fingermarks. Please avoid contact with moisture, oil, solvents, chemicals. The necklace/chain can be polished / cleaned if the patina becomes too dark for you. Use a jeweller's polishing cloth to restore the sheen. Do not use lemon juice, ketchup or any other acidic solution as this will damage the rose gold plated clasp and rings.

Raw Copper and Green Skin: Depending on the acidic levels in your body, some people experience discolouration of the skin with a green/blue tinge when wearing raw copper jewellery. This is a natural harmless reaction called ‘oxidisation’ when oxygen and your body’s natural oils combine to create a layer of copper carbonate on top of your skin. Most likely found when wearing rings and bracelets that fit snugly against your body causing you to sweat between the copper and skin. This is not a copper allergy, as it is rare to be allergic to copper due to its anti-microbial properties. Read more about why copper turns skin green here: https://www.earthbalance-craft.co.uk/why-does-copper-turn-skin-green/

** COPYRIGHT **

All of the designs in the store are hand-made by designer Nicola © Earth Balance Craft 2010-2018.
** BUSINESS HOURS **

If you have any questions please contact Nicola via the Etsy convo system. Business hours are Monday to Friday 9am to 5pm, UK timezone. Messages will be responded to within 1 working day. Any messages received after 5pm on Friday evening will be responded to on Monday.

** DIGITAL DOWNLOAD TERMS **

Once payment has been received, you will receive an email with a link to the downloadable file. Our tutorials are in a .PDF format. You will need a .PDF reader to enable viewing of the file. Please check prior to purchase that your computer or device can open/read .pdf files.

Our downloadable tutorials do not include any printed paper, craft materials or tools, nor a finished product.

Copyright: All Ebook content is copyright of “www.earthbalance-craft.co.uk and Earth Balance Craft”. Any redistribution or reproduction of part or all of the contents in any form is prohibited. This tutorials are for personal use only and are not to be reproduced for any educational or commercial purposes. © 2010-2018 www.earthbalance-craft.co.uk All Rights Reserved.

Our tutorials are written in English, for English readers only. Our tutorials use the UK metric system of measurement. All purchases of tutorials from Earth Balance Craft are final.

** PLEASE NOTE **

All items are unsuitable for children.

** INCORRECT SIZING **

We cannot be held responsible for incorrect bangle/ bracelet/ necklace / pendant sizes provided by you. Please note that re-sizing and alterations may be possible but will incur an extra charge.

** COLOUR VARIATION **

The colours are represented as naturally as possible in the images, but please be aware of the limitations of digital imagery and colour. Different computer screens can display the same image in a very different way.

There can be a difference between the monitor screens the product photographs are being viewed on. Everyone's monitor is set up differently i.e. contrast, brightness, saturation unless you are using a professionally calibrated screen. Our computer has been calibrated for professional photographic use. Using a calibrated work flow means whatever is on the monitor is calibrated to be true to life. In our Etsy store, this applies to the product photographs.

In most home scenarios the brightness is too high and the colours are overly colourful (saturated). This is where colour miss match can occur, because the viewer is seeing something that wasn't true in the first place. Please bear in mind that even two identical monitor models out of the factory will never look the same until calibrated.

** COPPER AFTER CARE GUIDE **

Product TLC: Please take care of your wire work product, each piece has been hand-made with simple construction using natural materials that have as little plastic and chemicals as possible. Each piece will stand up to normal everyday use as the soft copper metal has been work-hardened, however if you handle it roughly it will get squashed. I use the highest quality liquid metal varnish that has a durable glossy finish.
All metal varnishes are semi-permanent, the finish will degrade over time through oxidisation developing a dark patina. For longevity please avoid contact with water, oil based products, solvents, hairspray, alcohol and perfume which will prematurely degrade the varnish. To dust my wire work designs, please do not spray with any type of furniture or cleaning polish. Dust with a clean cloth or duster. If in time the copper becomes dull, you can restore the glossy shine with a jewellers polishing cloth or with extra fine grade wire wool. The copper can then be resealed with a metal varnish, you are welcome to contact designer Nicola who offers a 'copper re-sealing service'.

Out in the Garden: My suncatchers, hanging decorations and plant pot ornaments unless stated in the description can be placed indoors or outdoors in good weather. With a caveat to please be aware that when my designs are used outdoors, the metal varnish used will degrade quicker when exposed to the external environment e.g. water/humidity. The more moisture and salt content in the air, the quicker this process happens. Any metal alloy components will rust over time and may fail e.g. crimp beads. When copper is exposed to the elements, the raw copper metal reacts with the air causing patina to form over the surface of the piece, this can be dark brown, black and green colours, even forming rust in some cases. The longevity of the varnish out in the elements depends on the moisture/salt content in the air where you live. Copper as a metal that reacts in the air is always in a state of flux. The varnish I use is the highest quality liquid metal varnish available on the market used in yachting applications sealing metal masts which are exposed to all weathers. My designs can be polished to a high shine finish once again with a jeweller's polishing cloth, or by rubbing over with a very fine grade of wire wool, then to be resealed with a liquid metal gloss varnish from any hardware store. All metal varnishes used on copper will only ever be semi-permanent and will degrade in time over the years due to the oxidisation in the external environment. I do not recommend placing my designs out in the winter time or in bad weather like wind/hail/snow and when the temperature drops below freezing as some glass/gemstone beads will crack under extreme temperatures. Take care of your designs and they will last a very long time.

Hanging Mobiles: Please note my hanging mobiles are only suitable for hanging inside the home due to the delicate nature of the droplets. They are not suitable for garden / exterior use. When using as a baby mobile or in a child’s room, please remember that this product is not a toy or suitable for handling by babies/children. Please ensure the mobile is hung from the ceiling or high on the wall out of reach.

Oxidised Copper Jewellery: All of my copper jewellery designs (necklaces, pendants, bracelets, earrings) are hand-painted with a gloss varnish that is safe to wear on the skin. Even with a varnish coating, copper jewellery can cause your skin to discolour with a green or blue colour. This is a natural harmless reaction called ‘oxidisation’ when oxygen and your body’s natural oils combine to create a layer of copper carbonate on top of your skin. Most likely found when wearing rings and bracelets that fit snugly against your body causing you to sweat between the copper and skin. This is not a copper allergy, as it is rare to be allergic to copper due to its anti-microbial properties. A tip to avoid the discolouration is to keep your jewellery piece clean and to remove the piece when asleep. The double varnish layer I apply reduces down the likelihood of this reaction. Any coating used for copper metal is only semi-permanent and will degrade over time. With regular perfume or solvent use e.g. hairspray, whilst wearing my jewellery designs, this will degrade the varnish which will cause the piece to begin the natural darkening process (patina). A jewellers polishing cloth can be used to restore the shine.

Copper Plated Jewellery: Please note that all of my jewellery chains and findings such as clasps, jump rings and extension chains are copper plated (unless stated). Any metal alloy is lead and nickel free compliant with EU regulations. Please be aware that any copper plated components will tarnish over time with wear. There are ways you can extend the lifetime of your piece. Avoid contact with perfume, soap, cleanser, moisturiser, make-up, cream, nail polish, hair spray, moisture, oil, water and chlorine. Avoid wearing when exercising or swimming. The sweat and natural oils in your skin will also react with the copper plating over time, degrading the finish and tarnishing the piece to a dull dark colour. Do not use a jewellers polishing cloth on any copper plated components to restore the finish as this will rub away the plating. To buff use a lint free cloth or a soft jewellers cloth. Store your piece in a container where only copper plated jewellery has been kept as other metal alloys will cause tarnishing / metal reactions.

Hand Stamped Copper Bookmarks: A variety of my designs use the traditional method of hand-stamping onto copper sheet, often seen in my bookmarks and decorations. Each letter is hand-stamped with a wonky rustic appearance, to be imperfect and whimsical. There will be differences in each creation with the text alignment, spacing and position. It is also important to note that hand stamping onto copper sheet causes the rear side to buckle slightly from the metal being ‘chased’ on the front side, without any copper being removed. The indentation on the front is darkened to ‘pop’ the lettering and numbers. As with all of my designs, the copper sheet is sealed with a gloss varnish to retain the highlights.

Raw Copper Bangles: These bracelets are not treated with a varnish or lacquer. This means the copper will tarnish and patina over time and will be prone to fingermarks. Mix a solution with warm water and a few drops of fresh lemon or lime juice, with one teaspoon of salt, mixing it thoroughly together. Place the copper cuff into the solution and leave for about five minutes. When the time is done, rinse in water and if needed you can repeat the process. Alternatively use a jewellers polishing cloth to restore the sheen.

Raw Copper Necklace: As the pure copper metal of the feature and the chain is untreated, it will form a natural dark/dull patina over time and will also be prone to fingermarks. Please avoid contact with moisture, oil, solvents, chemicals. The necklace/chain can be polished / cleaned if the patina becomes too dark for you. Use a jeweller's polishing cloth to restore the sheen. Do not use lemon juice, ketchup or any other acidic solution as this will damage the rose gold plated clasp and rings.

Raw Copper and Green Skin: Depending on the acidic levels in your body, some people experience discolouration of the skin with a green/blue tinge when wearing raw copper jewellery. This is a natural harmless reaction called ‘oxidisation’ when oxygen and your body’s natural oils combine to create a layer of copper carbonate on top of your skin. Most likely found when wearing rings and bracelets that fit snugly against your body causing you to sweat between the copper and skin. This is not a copper allergy, as it is rare to be allergic to copper due to its anti-microbial properties. Read more about why copper turns skin green here: https://www.earthbalance-craft.co.uk/why-does-copper-turn-skin-green/

** COPYRIGHT **

All of the designs in the store are hand-made by designer Nicola © Earth Balance Craft 2010-2018.

Seller Details

Nicola Jones
83 Ducie Street
MANCHESTER, M1 2JQ
United Kingdom

You may also like

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…