Voron 2.4 R2 Printed Parts

Made to order ABS Voron 2.4 R2 parts made in Canada!

Pick between an Afterburner or Stealthburner for your Hotend Kit.

Made to order Parts in the colour of your choosing.

Made in Canada using High Quality Materials and printed on the BambuLabs Carbon and Similar brand machines

ABS (Colour customization available)

Average print turn around varies but usually around 5-6 days but we plan for a 2 week turnaround pending machine and material delivery times.

Voron Spec:
- 0.16mm layer height.
- 5 Perimeters, 40% Gyroid Infill,
- 5 Top Layers, 5 Bottom Layers.
- Roughly 1,200g worth of material used (Functional), 2,000g (full)

** inserts not installed and the responsibility of end customer

This kit DOESN'T include any of the non-essential parts such as the. You'll need print those yourself once you get your Voron running.
(Skirts, option electronic bays, and misc accessories)

Parts that will be included in your Essential package:

****Please include your Motherboard #2 color choice (alternate) and Hotend in the description**


Electronics_Bay
⦁ lrs_200_psu_bracket_x2.stl
⦁ pcb_din_clip_x3.stl
⦁ PSU_stabilizer_50mm.stl
⦁ raspberrypi_bracket.stl
⦁ rs25_psu_bracket.stl
⦁ wago_221-415_mount_3x5.stl

Electronics_Bay > Controller_Mounts
⦁ Octopus_bracket_set.stl

Gantry
⦁ [a]_z_belt_clip_lower_x4.stl
⦁ [a]_z_belt_clip_upper_x4.stl
⦁ z_chain_bottom_anchor.stl
⦁ z_chain_guide.stl

Gantry > AB_Drive_Units
⦁ [a]_cable_cover.stl
⦁ [a]_z_chain_retainer_bracket_x2
⦁ a_drive_frame_lower.stl
⦁ a_drive_frame_upper.stl
⦁ b_drive_frame_lower.stl
⦁ b_drive_frame_upper.stl

Gantry > Front_Idlers
⦁ [a]_tensioner_left.stl
⦁ [a]_tensioner_right.stl
⦁ front_idler_left_lower.stl
⦁ front_idler_left_upper.stl
⦁ front_idler_right_lower.stl
⦁ front_idler_right_upper.stl

Gantry > X_Axis > X Carriage

⦁Afterburner or Stealthburner piece's
⦁ x_carriage_frame_left_MGN12.stl
⦁ x_carriage_frame_right_MGN12.stl

Gantry > X_Axis > X Carriage > Direct Feed
⦁ [a]_connector_cover.stl
⦁ [a]_guidler.stl
⦁ [a]_latch.stl
⦁ [a]_latch_shuttle.stl
⦁ chain_anchor_2hole.stl
⦁ extruder_body.stl
⦁ extruder_motor_plate.stl

Gantry > X_Axis > X Carriage > Printheads
⦁ printhead_front_***.stl
⦁ printhead_rear_***.stl

Gantry > X_Axis > XY Joints
⦁ [a]_endstop_pod_D2F_switch.stl
⦁ [a]_endstop_pod_hall_effect.stl
⦁ [a]_xy_joint_cable_bridge_3hole.stl
⦁ xy_joint_left_lower_MGN12.stl
⦁ xy_joint_left_upper_MGN12.stl
⦁ xy_joint_right_lower_MGN12.stl
⦁ xy_joint_right_upper_MGN12.stl

Gantry > Z_Joints
⦁ z_joint_lower_x4.stl
⦁ z_joint_upper_hall_effect.stl
⦁ z_joint_upper_x4.stl

Z_Drive
⦁ [a]_belt_tensioner_a_x2.stl
⦁ [a]_belt_tensioner_b_x2.stl
⦁ [a]_z_drive_baseplate_a_x2.stl
⦁ [a]_z_drive_baseplate_b_x2.stl
⦁ z_drive_main_a_x2.stl
⦁ z_drive_main_b_x2.stl
⦁ z_drive_retainer_a_x2.stl
⦁ z_drive_retainer_b_x2.stl
⦁ z_motor_mount_a_x2.stl
⦁ z_motor_mount_b_x2.stl

Z_Endstop
⦁ nozzle_probe.stl

Z_Idlers
⦁ [a]_z_tensioner_x4_9mm.stl
⦁ z_tensioner_bracket_a_x2.stl
⦁ z_tensioner_bracket_b_x2.stl

Special thanks to the Voron team and affiliated design team for their design and development!

All parts released by the Voron team under the GNU General Public License v3.0.