Pythonicus Armageddon - StationForge

Sigmarite Boutique is proud to be a licensed printer of ‘StationForge‘ artillery and miniatures. This model is scaled for 32mm gaming (roughly 19cm tall at the shoulder) and is multipart so it will require gluing. This is a large advanced kit so it is recommended for experienced modelers.

All models are printed in 8K resin on 8K or higher resolution printers. Because they are printed in resin, these models are not suitable for use by children and they are not toys.

All parts will be delivered to you fully cleaned and cured, but UNPAINTED. Sample images are provided to highlight detail. Supports on large pieces will be removed but there may be some small sections that need to be trimmed or filled as support removal can lead to minor cosmetic marks. Small or delicate sections or pieces may ship with supports attached in order to reduce the risk of loss or breakage in shipping. The resin I use is usually grey in colour, but depending on availability, white or black may be used. Assembly for this model will require some knowledge and skill working with resin models, including cleaning, painting and gap filling.

UV cured resin paints well with acrylic paints, but always be sure to prime your model first. Please be aware of and pay attention to best practices when working with resin models. A mask should be worn if you plan to do any sanding or trimming as resin dust can be harmful.

If you have any questions or concerns, please message me, I‘m happy to help.