Personalized Leather Cuff Bracelets, Custom leather pieces for wrist, Third year anniversary, Mantra Custom Leather
Leather cuff custom made for you!
If you want yours to be made like one in a photo just ask me and I will tell you what color it is, what I did to the leather as far as design goes, etc to see more ideas of my leather pls go here:
https://www.etsy.com/shop/BlueCornerCreasigns?ref=l2-shop-header-avatar§ion_id=8122865
This listing is for ONE superior leather cuff .
If u have a quote and wonder if it will fit just ask .
From the drop downs 1) you will pick your metal and plate size. 2) the width of the leather and the length for your wrist. (all plates are approx.. 2.25” I only change length to be in proportion if the cuff is very large or very small in length)
✯ Metal plates: 22-20 gauge (is 0.644 mm) metal plates come beveled (default) in:
sizes: 2.25” x 0.50” or 2.25” x 0.75” (approx.) – usually the 0.50” width goes with the ¾” cuff and the 0.75 wide plate usually goes with the 1.0” width cuff, you can choose from drop down.
colors: silver tone (S) , brass (B) , and copper (C) (also in drop down)
• Pls note under metal plate the colors will be at the end of the measurement in either S for silver tone, B for brass, or C for copper. All of the plates come beveled, unless asked not to bevel. Bevel is the hammered finish or edge all around the metal plate.
♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥
*** IMPORTANT IMPORTANT IMPORTANT*** upon check out in “Notes Section” pls copy and paste this and fill in what you would like:
Quote: pls do not add quotation marks unless you want them stamped in.
Rivet color:
Rivet size:
Snap color:
Color of leather:
Font style:
Finish for metal: (polish or matted?):
Style of decorative tooling (Plain, love, joe, yingy, sunset, see examples just below):
(!!!!!!! NOTE: if you do not state the above customizations, your cuff will default to the first pic style. If there is more than one style of cuff in the first pic i will try to convo you or again i will pick. So please be sure to fill out the above and paste to your order. )
♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥
Helpful information of styles of tooling, how to measure your wrist to get a good fit, colors, and more:
STYLE OF TOOLING:
This is the work I do on the leather it is called tooling, I have different ones in my shop for examples to see the first photo is what i will be referring to to describe the type of tooling:
Love tooling: https://www.etsy.com/listing/208257923/personalized-leather-cuff-bracelet?ref=shop_home_active_14
Joe tooling: https://www.etsy.com/listing/189383747/personalized-leather-bracelet?ref=shop_home_active_71
Yingy tooling (the bottom blue one Marching to victory): https://www.etsy.com/listing/188713216/superior-leather-cuff-personalized?ref=shop_home_active_93
Sunsets (top red one Let Go): https://www.etsy.com/listing/188713216/superior-leather-cuff-personalized?ref=shop_home_active_93
Plain or simple lined border: https://www.etsy.com/listing/462453862/sun-and-moon-children-superior-leather?ref=shop_home_active_90
♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥
♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥
Examples for you --About some of the pics:
- 22g 2.25”x 0.50” silver plate (you can pick Brass Plate or Copper Plate) , teeny tiny rivets and briar brown color, This plate will have beveled edges.
Verbiage: Felix & Aria. Come hell or highwater- - Font type Modern Font 2mm the one with love love little dove (posh font and everything the same as the Felix cuff)
- 22g 2.25”x 0.50” copper plate (you can pick Silver Tone Plate or Brass Plate) , Mini Copper rivets and natural leather color, This plate will have beveled edges.
Verbiage: furever loved. & fight the good fight- - Font type Modern Font 3mm
- 22g 2.25”x 0.50” Brass plate (you can pick Silver Tone Plate or Copper Plate) for the bracelet with the sun with Teeny Tiny 1.3mm brass rivets and brass snaps, This plate will have beveled edges.
Verbiage: Shekh Ma Shieraki Anni (wavy sun and a little stars at the left beginning of verbiage) approx 22 characters and spaces not including deco stamps.- - Font type Modern Font 2mm, upper and lower case as typed.
- 22g 2.25”x 0.50” Silver plate (you can pick Brass Plate or Copper Plate) for the bracelet with the moon with Teeny Tiny 1.3mm silver rivets and silver snaps. This plate will have beveled edges.
Verbiage: Jalan Atthirari Anni ( a moon next to it at left beginning of verbiage) approx 20 characters & spaces not including deco stamps. - - Font type Modern Font 2mm, upper and lower case as typed.
- Color: Briar Brown.
- Simple border with approx. 1.5mm from edge.
- Each piece is sealed and conditioned for a lustrous sheen. One must recondition leather to maintain it's beauty.
♛♛♛ More about variations, colors, rivets, etc (see below): ♛♛♛.
Enjoy the stylish look of leather cuffs – Personalized and Custom made to *your* exact specifications. Leather cuffs are timeless pieces that were inspired from suits of armor as well as finishing details to one’s outfit in the middle ages. Either way, one cannot deny the beauty of detailed leather and metal. Two of my favorite mediums, together, that form an original, one of a kind art piece.
When I say custom made to *your* exact specifications – I mean just that due to the fact that I cut my leather from high grade, gorgeous, shoulder 5/6 oz. leather ( about 1/8" thick / .32 cm). The leather cuffs are NOT thin, flimsy, common leather cuffs. I also dye my own pieces, so not one piece will be exactly the same as the next – making them all OOAK originals. Lastly, the decorative tooling on my leather pieces is my own work and "look at my edges". When looking at superior quality, leather pieces a good tell about quality craftsmanship is if they finish their edges...a good leather craftsman always finishes his/her edges so that they are not frayed but smooth and rounded (unless of course the customer would not like them finished ;).
✯ Leather cuffs Sizing:
You can pick your size from the drop down. The snaps will be at the size you pick. For example if you choose 7.0" I will place the snaps at that spot and there will be a small amount of margin following the snaps. If you would like double snaps, here are the placements for those and can be picked from the drop down as well
“small double” snaps at the 6.5” mark and at the 7.5” mark.
“medium double” snaps at the 7” mark and at the 8” mark.
“large double” snaps at the 7 1/2” mark and at the 8 1/2” mark.
(There will of course be a small amount of excess following snaps, approx. ¼”).
Making sure you get the correct fit. Measure your wrist and add 1/2" or round up to the next half inch. To allow for the thickness and snaps of the leather. More on fitting your bracelet, please view this video to help understand the process :):
https://www.youtube.com/watch?v=rUu7HfUC-fU
✯ Rivets come in:
Silver tone or Brass or Copper & Teeny Tiny, Mini & Small
✯ Snaps on back come in:
Silver tone, Brass tone and Gun metal
Decorative tooling – please see samples in my leather section: https://www.etsy.com/shop/BlueCornerCreasigns?section_id=8122865&ref=shopsection_leftnav_2
✯ Metal plates: 22 gauge (is 0.644 mm) metal plates come beveled (default) in:
sizes: 2.25” x 0.50” or 2.25” x 0.75” (approx.) – usually the 0.50” width goes with the ¾” cuff and the 0.75 wide plate usually goes with the 1.0” width cuff, you can choose from drop down.
colors: silver tone (S) , brass (B) , and copper (C) (also in drop down)
• Pls note under metal plate the colors will be at the end of the measurement in either S for silver tone, B for brass, or C for copper. All of the 22 gauge plates come beveled, unless asked not to bevel.
✯ Color of leather (I dye my own leather with leather dyes and stains):
Scarlett red,
Sunshine yellow,
Tangerine orange,
Envy green,
Deepest Ocean Blue (Deep Navy),
Plum violet,
Pink Pink
Demin washed Look Blue,
Lighter blue,
Just Medium Blue,
Lilac,
white...
Blackest Black,
Black Highlight,
Timber Brown,
Saddle Tan,
Briar Brown AND
Natural Sheen
(***pls note colors have some variation to them as i mix them and dye myself, most of the
colors overlay on natural leather - color is a light neutral tan color; hence, color overlay is
not on a white base for some stains, some colors i do add white to them making more
opaque - please allow for some variation).
♥ ♥ "Fonts Designs and Textures ", to see up close and personal. Just click: https://www.flickr.com/search/?user_id=124518283%40N07&view_all=1&text=Fonts
↕️ see also :
https://www.etsy.com/listing/1502067030/informational-listing-fonts-stamps-etc?click_key=93dc50c4122d0f3c2ed051a7fc55f2ab5a83b205%3A1502067030&click_sum=d524937b&ref=shop_home_active_1&pro=1&frs=1
Design stamps:
Heart (different styles)
. Flower
. Cross
. Awareness ribbon
. Acorn (represents strength from an oak tree)
. Butterfly
. Keyhole
. Hockey sticks
. Key
. Sun burst
. Wave
. Ichthus Christian fish
. Bulls eye, swirly heart 2, swirly scroll, swirly heart 3, hypnotic swirl circle, swirly
yramid, exclamation point, parenthesis, comma, asterisk, scroll 2, check mark
. Mother Child love
. Paw print
. & symbol
. Quotation marks
. Longitude latitude symbols
. Circles (2mm, 3mm, and 4.8 mm in diameter)
. AND GROWING!!!
I am always adding more stamps, so pls let me know if there is a particular one you are interested in, and i will check my inventory.
•*¨*•.¸¸❤¸¸.•*¨*• •*´¨`*•.¸¸.•*´¨`*•.¸¸.•*´¨`*•.¸¸.•*´¨`*•.¸¸.••*¨*•.¸¸❤¸¸.•*¨*•
◉◡◉ See more items like: Photo Jewelry, Leather Cuffs, Cuff Links, Guitar Picks, Ballet totes & more! : https://www.etsy.com/shop/BlueCornerCreasigns
•*¨*•.¸¸❤¸¸.•*¨*•: •*´¨`*•.¸¸.•*´¨`*•.¸¸.•*´¨`*•.¸¸.•*´¨`*•.¸¸.••*¨*•.¸¸❤¸¸.•*¨*•
-----------------------------------
What is leather tooling? Here’s a definition from WiseGeek online Tooled leather is leather which has been worked in some way to be decorative as well as functional. The designs on tooled leather range from the simple to the ornate, and they are part of the artistic tradition of many nations. Collectively, things which have been made from tooled leather are often known as leather crafts, in a reference to the craftsmanship which went into their construction.
Please note that this is a free hand art form. Each piece has it's own unique charm to it, as these are not machine made, they will vary slightly one to the next and from the picture shown above. Although, I strive to maintain great alignment, it is my hope that one may appreciate the organic quality of your one-of-a-kind piece. With each strike and placement, your design came to life. Your one of a kind, special piece will come in a lovely wheat box.
* by purchasing this listing you agree that you have read it in its entirety, understand shop policies, know about the metal you purchase and understand there are no refunds on custom made items. Any information not sent in template & notes to seller at checkout means you allow for artistic liberty to be taken.
