This Akita, Malamute, or Husky dog key chain is based on a pattern by Steve Good. I hand cut my key chains (not laser cut) on a scroll saw. I cut the interior image first from 1/8 inch thick wood, then glue the front wood to a 3/16 to 1/4 inch thick backing wood. Next, I cut the oval, shape and sand, and seal with urethane. When dry, I fill the image with clear casting epoxy resin mixed with various colorants. After the epoxy is cured, I sand it flush with the wood and finish with a gel wipe on urethane.

The Akita dog key chain is maple backed with mahogany. I filled it with clear casting epoxy resin which allows the color of the back wood to show in the image and protects the delicate fretwork from damage. I attached a 4 inch long ball chain and a 32 mm split ring to securely hold your keys.

The size of the oval is 1 3/8 inches high and 2 3/4 inches long.

Another version of this key chain is available here:
http://www.etsy.com/listing/82685142/akita-key-chain-malamute-dog-keychain

You can find more resin filled dog breed key chains are here:
https://www.etsy.com/shop/OohLookItsARabbit?section_id=18814672

Additional resin filled scroll saw key chains are here:
https://www.etsy.com/shop/OohLookItsARabbit?section_id=18917726

Simple silhouette key chains are here:
http://www.etsy.com/shop/OohLookItsARabbit?section_id=7226558