3 x 400ml Kwasny Belton Frosted Glass Effect



Special lacquer that is used to achieve a special milky-matt effect on transparent painted objects such as window glass, mirror surfaces, vases and so on. Ideal as a privacy screen or for decorative purposes.



Application

A milky matt effect or privacy protection is achieved on transparent painted objects, such as window glass, shower cubicles and mirror surfaces. Serves as a privacy screen or for decorative purposes.



Product advantages

• Milky-matt paint effect

• Privacy protection and decoration in one

• Very good flow and easy processing

• Fast drying and high yield

• Weather-resistant, for indoor and outdoor use

• Ideal for window glass, shower cubicles, seal surfaces, vases and so on

• Recommendation: glaze, paint in several thin layers



Binder base

Acrylic resin base



Spray application

With 3 to 4 cross passes: 20 to 40 μm each (5 to 10 µm per cross pass)

Spray distance: 15 to 25 cm

dry times

Dust dry: after about 20 minutes

Firm to the touch: after around 60 minutes

Dry through: after about 12 hours

Can be painted over: with itself at any time



Paint structure

1. belton special frosted glass effect



Notice

Glaze, paint in several thin layers. The surface to be painted must be clean, dry and free of grease.

Recommendation: When painting plastics, please check compatibility beforehand and prime with belton basic plastic primer.



Danger!

Please note that the monitor display may differ from the actual color.

Danger

Extremely flammable aerosol. Container is under pressure: may burst if heated. Causes serious eye irritation. May cause drowsiness and dizziness. If medical advice is required, have packaging or identification label available. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Do not spray on an open flame or other source of ignition. Do not puncture or burn, even after use. Use only outdoors or in well-ventilated areas. IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove any contact lenses. Continue rinsing. If you feel unwell, call a doctor. If eye irritation persists: Get medical advice/attention. Do not inhale aerosol. Protect from sunlight. Do not expose to temperatures above 50°C. Do not keep in living rooms. Dispose of contents/container in accordance with local regulations. Without adequate ventilation formation of explosive mixtures possible.

Pay attention to the data safety sheet and product description!