♻️ Material: high-quality PLA (plastic) made from 100% biodegradable raw materials
🔴 Set consists of 3 SplitCups, each with different chambers
🔴 with a unique drip-free spout© = no more paint running down the cup - tested by myself as an acrylic pouring artist (more on this on my YouTube channel: "John Franklin Art" - there you will find more than 200 pouring techniques)
🔴 Can be ordered in two versions:
a) without handle
b) with handle for more precise and easier pouring of paint
🔴 Volume: 8.5oz (250ml)
🔴 can be ordered with 2,3,4,5,6,7 or 8 chambers
🔴 Each split cup is divided into equally sized chambers. This means that each chamber holds the same content. The cup holds 250ml and depending on the number of chambers, this is then divided. For example, with the 2-chamber cup, each chamber contains 125ml. I designed the cup a bit larger so that if all chambers were full, it would have a total capacity of 280ml. But since you never fill them up to the top edge, you get at least a filling quantity of 250ml per cup.
🔴 Material: high-quality PLA (♻️ biodegradable plastic)
🔴 Dimensions (width x depth x height):
- without handle: 8.2 x 8.2 x 9 cm ( 3.23 x 3.23 x 3.54 inches)
- with handle: 8.8 x 8.8 x 9 cm ( 3.46 x 3.46 x 3.54 inches)
🔴 Care: Rinse with lukewarm water immediately after use or cover completely with water (place in bucket of water) and clean later to minimize paint drying time, thereby reducing discoloration and paint sticking. Do not heat above 50 degrees, otherwise the material will deform. Do not put in the dishwasher! And do not store in direct sunlight, otherwise the material will become brittle over time.
🔴 If you want to see other casting tools, check out my YouTube channel: John Franklin Art! Here is the link to my channel: https://bit.ly/JohnFranklinArtYouTube
✅ After receipt of your order, the article will be printed by me.
❓ If you have any questions about the product, please send me an ETSY message.
❓ If you want other sizes, please send me an ETSY message.
Fabulous tool to discover new horizons with acrylic pouring. This makes new interesting patterns possible. This tool is suitable for beginners as well as advanced users. You fill each of the chambers with a color of your choice and then pour out the cup onto the canvas. With this you can move the cup in circles or other shapes. This will create different patterns. From my own experience as an acrylic pouring artist, I have adapted the split cup and given it a drip-free spout. This prevents paint from running down the edge of the cup when pouring. So the color ends up where it should. And if you want even more accuracy and ease when pouring acrylic, I can highly recommend the version with a handle. This allows the paint to be poured more precisely and you don't need so much strength to hold the cup in your hand. In addition, the handle is very comfortable in the hand.
And if you want to discover other tools for acrylic pouring, you can find them in this playlist made by me http://bit.ly/Playlist_3D_printed
I designed the product myself and I print the product with my own Prusa 3D printers here in Germany. My experiences from my many years as a pouring artist have flowed into the design of the cup. I have tested the mug extensively in order to be able to create the best possible and wonderful new patterns. This product is printed with biodegradable, high-quality PLA filament, which is derived from renewable resources such as natural fats and oils. It can be washed off well and can therefore be used again and again. It should not be exposed to temperatures above 50 degrees, otherwise the plastic can warp. So please do not put it in the dishwasher! And wash off with cold water only. (You can find more information about the plastic I use here: https://prusament.com/materials/pla/