Smooth plain color iron-on flex sheets.
Available in 30 x 25cm or 30 x 15cm
The size may differ by plus or minus 0.5mm
Very thin polyurethane material, matte finish and with excellent covering properties.
This flex has the advantage of being able to squeeze in 5 seconds at 160 degrees with a hot peel. This considerable time saving will optimize your productivity.
This flexible, elastic and versatile polyurethane film, with an adhesive polyester backing, is very easy to weed.
Ideal for multi colored designs due to the wide range of colors available. It has a smooth matte finish, with a silkscreen finish and excellent opacity. Its adhesive liner allows the cutting of small patterns and very easy weeding.
This flex has an adhesive liner, it can be applied to all types of supports, cotton, polyester, acrylic...; and boasts a wide color palette.
If you are looking for a professional finish with excellent hold over time, try our Stahls' flex, 100% satisfaction guaranteed!
Application instructions: 100% Cotton, 100% Polyester (always do a test before launching into production), Polycotton blend.
Before starting production, remember to always carry out a test in order to find the right balance between pressure, time and heating temperature.
Application Tips:
1) Cut the mirrored material with a standard flex blade.
2) Weed the excess material.
3) Position and press the marking on the textile with its polyester support at 150°C - 5 seconds (10s. at 130°C), medium pressure.
4) Remove the liner hot or cold.
Usage precautions:
Carefully follow the instructions specified on the garment.
After pressing, wait 24 hours before the first wash.
Washing: 60°C max. upside down, do not use aggressive products (bleach, etc.).
Dry cleaning: yes
Ironing: inside out
Coil storage: max. one year, vertically, in a dry place, 15-30°C - Protected from light.