Annonce
NOUS VENDONS DES AUTOCOLLANTS DE TOBOGGAN À JET D’ENCRE DE HAUTE QUALITÉ. CHOISISSEZ PARMI UNE VARIÉTÉ DE DÉCALCOMANIES FLORALES, DE ROSES, DE DÉCALCOMANIES VICTORIENNES, DE CHÉRUBINS, D’ANGES, DE FÉES, D’ÉTIQUETTES DE BIDONS, D’ÉTIQUETTES D’ÉPICES, DE DÉCALCOMANIES DE TAILLE DE MEUBLE, D’ÉTIQUETTES PERSONNALISÉES, DE CARTES DE VISITE PERSONNALISÉES ET PLUS ENCORE! NOUS NOUS SPÉCIALISONS DANS LES COMMANDES PERSONNALISÉES
DEMANDEZ-NOUS!
Instructions pour l’application de vos autocollants de toboggan à jet d’encre
Il est préférable que l’objet que vous décalquez ait une surface plane brillante (non arrondie). Appliquez des décalcomanies sur une surface propre : céramique, verre, métal, bois peint, plastique, savon, bougies, etc. Découpez soigneusement l’autocollant de la feuille (le plus près possible des bords) et trempez le décalque dans un plat d’eau tiède pendant environ 30 secondes. Les décalcomanies plus grandes peuvent avoir besoin de tremper un peu plus longtemps. En plaçant l’autocollant entre vos doigts, sentez si le décalque glisse du papier. Si c’est le cas, vous êtes prêt à faire glisser l’autocollant du papier de support en position sur l’objet. REMARQUE: Si vous mouillez un peu la surface de l’objet, l’autocollant glissera mieux. Épongez doucement l’excès d’eau avec un chiffon ou une serviette en papier et lissez-le avec les doigts ou un objet à bord droit pour éliminer les bulles. Laisser sécher. Appliquez une couche de vernis en aérosol (comme Krylon Crystal Clear Finishing Spray) ou un pinceau sur vernis (comme Delta Ceramcoat) sur l’objet pour sceller l’autocollant et le protéger de la décoloration, des rayures de surface et de l’humidité. Laissez sécher un temps de réglage d’environ 3 heures. Votre objet décoré est prêt! REMARQUE: Vous pouvez accélérer le temps de séchage en plaçant votre objet décoré sous / près d’un ventilateur.
Conseils utiles
Vous obtiendrez les meilleurs résultats si vous utilisez vos décalcomanies sur une surface de couleur blanche ou crème. Il est plus facile de repositionner vos décalcomanies et de les obtenir exactement où vous le souhaitez si vous les appliquez sur une surface brillante. Si l’article décoré a une finition « mate » (comme les murs), assurez-vous de mouiller légèrement la surface avant d’appliquer l’autocollant pour le faire mieux glisser. De cette façon, le décalque glisse en position et adhère bien. Ensuite, vous devez utiliser un spray de revêtement mat pour sceller vos décalcomanies en place, comme le spray Krylon Matte Finish. Veuillez n’acheter que ce que vous prévoyez d’utiliser au cours des prochains mois, plutôt que d’en acheter un tas et de les stocker pendant un an. Selon l’humidité et la température de votre région, ils peuvent ne pas bien vieillir. Ils peuvent devenir cassants avec l’âge ou peuvent s’enrouler s’ils sont exposés à trop d’humidité. Lorsque vous les stockez, il est utile de les mettre dans un sac ou un dossier en plastique pour les protéger de l’humidité et de les ranger à plat.
WE SELL HIGH QUALITY INKJET WATERSLIDE DECALS. CHOOSE FROM A VARIETY OF FLORAL DECALS, ROSES, VICTORIAN DECALS, CHERUBS, ANGELS, FAIRIES, CANISTER LABELS, SPICE LABELS, FURNITURE SIZE DECALS, CUSTOM LABELS, CUSTOM BUSINESS CARDS & MORE! WE SPECIALIZE IN CUSTOM ORDERS
ASK US!
Instructions for Applying Your Inkjet Waterslide Decals
It's best if the object you are decaling has a glossy flat (not rounded) surface. Apply decals to a clean surface: ceramic, glass, metal, painted wood, plastic, soap, candles, etc. Carefully cut out the decal from the sheet (as close to the edges as possible) and dip the decal in a dish of lukewarm water for about 30 seconds. Larger decals may need to soak a little longer. Placing the decal between your fingers, feel if the decal slides from the paper. If it does then you are ready to slide the decal off the backing paper into position on the object. NOTE: If you wet the surface of the object a little, the decal will slide on better. Gently blot excess water with a rag or paper towel and smooth with fingers or a straight edge object to work out any bubbles. Allow to dry. Apply a coat of spray varnish (like Krylon Crystal Clear Finishing Spray) or a brush on varnish (like Delta Ceramcoat) over the object to seal the decal and protect from fading, surface scratches, and moisture. Allow setting time of about 3 hours to dry. Your decorated object is ready! NOTE: You can speed up drying time by placing your decorated object under/near a fan.
Helpful Tips
You'll get the best results if you use your decals on a white or cream colored surface. It's easiest to reposition your decals and get them just where you want them if you apply them to a glossy surface. If the item being decorated has a "matte" finish (such as walls), make sure you wet the surface slightly before applying the decal to make it slide on better. That way the decal slides into position & adheres well. Then you should use a matte coating spray to seal your decals in place such as Krylon Matte Finish spray. Please buy only what you plan to use in the next few months, rather than buying a bunch and storing them for a year. Depending on your area's humidity and temperature, they may not age well. They might get brittle with age or can curl if exposed to too much humidity. When you do store them, it's helpful if you put them in a plastic bag or folder for keeping them from the humidity, and store them flat.
Annonce
Dernière mise à jour : 27 mars 2018
NOUS VENDONS DES AUTOCOLLANTS DE TOBOGGAN À JET D’ENCRE DE HAUTE QUALITÉ. CHOISISSEZ PARMI UNE VARIÉTÉ DE DÉCALCOMANIES FLORALES, DE ROSES, DE DÉCALCOMANIES VICTORIENNES, DE CHÉRUBINS, D’ANGES, DE FÉES, D’ÉTIQUETTES DE BIDONS, D’ÉTIQUETTES D’ÉPICES, DE DÉCALCOMANIES DE TAILLE DE MEUBLE, D’ÉTIQUETTES PERSONNALISÉES, DE CARTES DE VISITE PERSONNALISÉES ET PLUS ENCORE! NOUS NOUS SPÉCIALISONS DANS LES COMMANDES PERSONNALISÉES
DEMANDEZ-NOUS!
Instructions pour l’application de vos autocollants de toboggan à jet d’encre
Il est préférable que l’objet que vous décalquez ait une surface plane brillante (non arrondie). Appliquez des décalcomanies sur une surface propre : céramique, verre, métal, bois peint, plastique, savon, bougies, etc. Découpez soigneusement l’autocollant de la feuille (le plus près possible des bords) et trempez le décalque dans un plat d’eau tiède pendant environ 30 secondes. Les décalcomanies plus grandes peuvent avoir besoin de tremper un peu plus longtemps. En plaçant l’autocollant entre vos doigts, sentez si le décalque glisse du papier. Si c’est le cas, vous êtes prêt à faire glisser l’autocollant du papier de support en position sur l’objet. REMARQUE: Si vous mouillez un peu la surface de l’objet, l’autocollant glissera mieux. Épongez doucement l’excès d’eau avec un chiffon ou une serviette en papier et lissez-le avec les doigts ou un objet à bord droit pour éliminer les bulles. Laisser sécher. Appliquez une couche de vernis en aérosol (comme Krylon Crystal Clear Finishing Spray) ou un pinceau sur vernis (comme Delta Ceramcoat) sur l’objet pour sceller l’autocollant et le protéger de la décoloration, des rayures de surface et de l’humidité. Laissez sécher un temps de réglage d’environ 3 heures. Votre objet décoré est prêt! REMARQUE: Vous pouvez accélérer le temps de séchage en plaçant votre objet décoré sous / près d’un ventilateur.
Conseils utiles
Vous obtiendrez les meilleurs résultats si vous utilisez vos décalcomanies sur une surface de couleur blanche ou crème. Il est plus facile de repositionner vos décalcomanies et de les obtenir exactement où vous le souhaitez si vous les appliquez sur une surface brillante. Si l’article décoré a une finition « mate » (comme les murs), assurez-vous de mouiller légèrement la surface avant d’appliquer l’autocollant pour le faire mieux glisser. De cette façon, le décalque glisse en position et adhère bien. Ensuite, vous devez utiliser un spray de revêtement mat pour sceller vos décalcomanies en place, comme le spray Krylon Matte Finish. Veuillez n’acheter que ce que vous prévoyez d’utiliser au cours des prochains mois, plutôt que d’en acheter un tas et de les stocker pendant un an. Selon l’humidité et la température de votre région, ils peuvent ne pas bien vieillir. Ils peuvent devenir cassants avec l’âge ou peuvent s’enrouler s’ils sont exposés à trop d’humidité. Lorsque vous les stockez, il est utile de les mettre dans un sac ou un dossier en plastique pour les protéger de l’humidité et de les ranger à plat.
WE SELL HIGH QUALITY INKJET WATERSLIDE DECALS. CHOOSE FROM A VARIETY OF FLORAL DECALS, ROSES, VICTORIAN DECALS, CHERUBS, ANGELS, FAIRIES, CANISTER LABELS, SPICE LABELS, FURNITURE SIZE DECALS, CUSTOM LABELS, CUSTOM BUSINESS CARDS & MORE! WE SPECIALIZE IN CUSTOM ORDERS
ASK US!
Instructions for Applying Your Inkjet Waterslide Decals
It's best if the object you are decaling has a glossy flat (not rounded) surface. Apply decals to a clean surface: ceramic, glass, metal, painted wood, plastic, soap, candles, etc. Carefully cut out the decal from the sheet (as close to the edges as possible) and dip the decal in a dish of lukewarm water for about 30 seconds. Larger decals may need to soak a little longer. Placing the decal between your fingers, feel if the decal slides from the paper. If it does then you are ready to slide the decal off the backing paper into position on the object. NOTE: If you wet the surface of the object a little, the decal will slide on better. Gently blot excess water with a rag or paper towel and smooth with fingers or a straight edge object to work out any bubbles. Allow to dry. Apply a coat of spray varnish (like Krylon Crystal Clear Finishing Spray) or a brush on varnish (like Delta Ceramcoat) over the object to seal the decal and protect from fading, surface scratches, and moisture. Allow setting time of about 3 hours to dry. Your decorated object is ready! NOTE: You can speed up drying time by placing your decorated object under/near a fan.
Helpful Tips
You'll get the best results if you use your decals on a white or cream colored surface. It's easiest to reposition your decals and get them just where you want them if you apply them to a glossy surface. If the item being decorated has a "matte" finish (such as walls), make sure you wet the surface slightly before applying the decal to make it slide on better. That way the decal slides into position & adheres well. Then you should use a matte coating spray to seal your decals in place such as Krylon Matte Finish spray. Please buy only what you plan to use in the next few months, rather than buying a bunch and storing them for a year. Depending on your area's humidity and temperature, they may not age well. They might get brittle with age or can curl if exposed to too much humidity. When you do store them, it's helpful if you put them in a plastic bag or folder for keeping them from the humidity, and store them flat.