JUNE SALES! Memphis style wall decals, vintage design

Memphis style wall decals, vintage design

- These individual vinyls can be arranged however you want.

Peel and Stick

>>>>>>>>>>>>>>>>>>>>>>>>>>>
With decals, it is easy to create a new look and change the style of almost any surface.
Vinyl decals can stick to any smooth and almost any flat, clean surface (walls, mirrors, windows, doors, appliances, furniture, tiles, vehicles etc.) and also on slightly textured walls.
NOT recommended for surfaces such as:
- Roughly structured surface, concrete, cement wall, freshly painted surfaces, dirty surfaces.
Note: Please read all of the description and check size before ordering
If you have any questions just contact me!

>>>>>>>>>>>>>>>>>>>>>>>>>>>
SIZES:

Various sizes between 1.7 x 1.7cm and 12 x 17 cm approx.

>>>>>>>>>>>>>>>>>>>>>>>>>>>
PRODUCTION:

Comes in 2 sets:

- 150 pieces
- 300 pieces

>>>>>>>>>>>>>>>>>>>>>>>>>>>
NOTE:
- Picture may not be an actual representation of the size. Please refer to above measurements.

- If you would like your decal larger or smaller or multiples please message me prior to purchasing so that I can discuss pricing and set up a custom listing for you.

>>>>>>>>>>>>>>>>>>>>>>>>>>>
COLOURS:

Available in a selection of:
-31 colours of GLOSS vinyl
-19 colours of MATT vinyl

IMPORTANT NOTE:
COLOURS MAY APPEAR DIFFERENTLY ON DIFFERENT COMPUTER SCREENS

Peel and Stick

>>>>>>>>>>>>>>>>>>>>>>>>>>>
ADDITIONAL INFORMATION:
>>>>>>>>>>>>>>>>>>>>>>>>>>>

- Decals are removable, but not reusable!
- Decals are a one time use product as the vinyl stretches when it is removed.
- Removing the vinyl from your surface is simple and hassle free.
- If you should run into any problem slowly peel back the vinyl, simply heat the vinyl with a hair dryer to loosen its grip on your surface.
-Please see my shop policies for more information about our vinyl decals.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
This listing is for the decal only.
>>>>>>>>>>>>>>>>>>>>>>>>>>>

The shop is based in the UK.****Please understand there are many factors beyond my control that may make your wall unique.
****Refunds will not be given for wall incompatibility
Wall paint is one of the most important factors when installing vinyl wall murals.
If you’re unsure about how vinyl will adhere to your painted surface please start with the TEST decal on a lower part of that surface where you wish to fit the rest of decals.
In the past few years, paint manufacturers have come out with paints that resist dirt and grime and are easy to clean.
It just so happens that the properties that make these paints dirt resistant and cleanable also make them resistant to vinyl application.
Other paints have come out with low VOC levels (Volatile Organic Compounds) to make them less harmful to the environment.
Low VOC paints resist vinyl adhesion as well.

Sticking a decal to a wall. It really shouldn’t be this hard. But with the advent of low-VOC paint, life has gotten a little tougher for those of us that do it for a living. Due to government regulations and efforts to make the world a better place, paint manufacturers have been changing the chemistry and reducing the level of Volatile Organic Compounds in their product. And that change has affected the way decal materials adhere to this new paint.

What was once a simple install is now a game of chance. You apply the graphics and a few days later they are peeling off the wall. Decals just don’t want to stick to these low-VOC paints. The issue is that all of these paints are different. I don’t have a material that I can guarantee for every paint. What works well with one paint may fail on another. But the good news is now that we recognize the problem, we can recommend a few extra steps that will lead to a more successful application. Although adding steps may seem bothersome, this careful and thorough effort could be the difference between a happy customer and a waste of money. Check out the steps below and watch 3M’s instruction video for more information.

How to Ensure Better Adhesion
Prepare a cleaning solution of 70% isopropyl alcohol and 30% water.
Saturate a cleaning cloth with the solution.
Thoroughly wipe all parts of the wall where the decal will adhere.
Wait 10 minutes for the wall to dry.
Repeat steps 2-4 once or twice more for increased adhesion.
Apply decal.
Click this link for 3M recommended paints and primers for the best adhesion.
https://www.youtube.com/watch?v=ozVGLrYXKKU

LOW VOC PAINTS: WHAT ARE THEY?
During drying paints emit volatile organic compounds (VOC) ; the smell we normally associate with drying paint has some level of toxicity and many people are sensitive to it. Paint industry developed a new formulation that emits less VOC, but creates a silicon type of surface that (in some cases) repels peel and stick decals, stickers and wallpapers.

Couple of examples:
LITTLE KNIGHTS, AIRLITE, EARTHBORN, LAKELAND, ALSPAR, DULUX, FARROW AND BALL, TIKKURILLA